1STQ001895B0000 ABB PFFA2060 System Pro E Power Fixed Frame 2000 x 600 mm

Why Choose the ABB PFFA2060 Fixed Frame for System Pro E Power?

The ABB PFFA2060 (1STQ001895B0000) is a fixed frame accessory designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as FIXED FRAME SPEC. SOL. H=2000MM W=600MM, this component is intended for compatible switchboard assemblies requiring a fixed internal frame with a nominal height of 2,000 mm and width of 600 mm.

The PFFA2060 forms part of ABB's modular switchboard accessory range, supporting the construction of coordinated internal equipment arrangements. Its specified dimensions help electrical panel builders identify the appropriate fixed frame for a particular switchboard height, section width and internal mounting configuration.

The manufacturer description includes SPEC. SOL., indicating a specific ABB configuration designation. The precise application and associated installation requirements should be verified against the relevant System Pro E Power technical catalogue. The PFFA2060 is a structural mounting accessory, not a complete switchboard enclosure, distribution board or electrical protective device.

Key Advantages

• Genuine ABB System Pro E Power fixed frame accessory for modular low-voltage switchboards.
• Designed for compatible internal switchboard mounting arrangements.
• 2,000 mm nominal height for the specified frame configuration.
• 600 mm nominal width for corresponding switchboard sections.
• Provides a dedicated fixed-frame solution within ABB's coordinated accessory range.
• Supports organised positioning of compatible internal equipment and mounting components.
• Helps panel builders select frame accessories according to the required enclosure dimensions.
• Supports coordinated switchboard construction using compatible ABB structural components.
• Suitable for professional electrical panel manufacturing, installation and refurbishment.

Key Features

• ABB System Pro E Power product family.
• PFFA2060 manufacturer product designation.
• 1STQ001895B0000 ABB manufacturer ordering code.
• FIXED FRAME SPEC. SOL. H=2000MM W=600MM manufacturer description.
• Fixed frame configuration.
• 2,000 mm nominal height.
• 600 mm nominal width.
• SPEC. SOL. manufacturer configuration reference.
• Designed for compatible ABB System Pro E Power switchboard structures.
• Supports modular internal equipment installation arrangements.
• Part of ABB's coordinated switchboard construction accessory range.
• Requires compatibility verification against the applicable ABB technical documentation.

Understanding Fixed Frame Installation in System Pro E Power Switchboards

Fixed frames are used in modular low-voltage switchboard construction to provide a defined structural arrangement for compatible internal components. Selecting the appropriate frame helps establish the intended equipment layout and supports coordination between mounting accessories, enclosure structures and other internal switchboard components.

The ABB PFFA2060 is identified as a fixed frame with nominal dimensions of 2,000 × 600 mm (H × W). These dimensions are important when selecting accessories for switchboard sections with different heights and widths. They identify the intended frame configuration and should not be interpreted as the overall external dimensions of a complete assembled enclosure.

The fixed-frame designation describes the structural arrangement of this accessory. It should not be confused with the fixed mounting version of a circuit-breaker. Compatibility with particular circuit-breakers, switch-disconnectors or other electrical devices depends on the associated installation kits and ABB's approved assembly configurations.

The manufacturer's SPEC. SOL. reference forms part of the product description. Because the supplied specification does not define this abbreviation in detail, its precise application and any associated equipment requirements should be confirmed against ABB's technical catalogue. A frame with matching nominal dimensions should not automatically be considered interchangeable with the PFFA2060.

When planning the switchboard assembly, panel builders should verify the intended frame position, mounting points, supporting structures, installation clearances and compatibility with neighbouring components. Cable routing, access to electrical equipment and any required internal segregation should also be considered as part of the complete design.

The PFFA2060 must be installed according to the applicable ABB System Pro E Power instructions. The exact supplied components, fixing hardware and assembly sequence should be confirmed from the manufacturer's documentation before installation.

For low-voltage switchboards designed in accordance with BS EN IEC 61439-1 and BS EN IEC 61439-2, the completed assembly must meet the applicable mechanical and electrical verification requirements. The PFFA2060 does not independently establish a rated current, short-circuit withstand rating, enclosure IP classification or internal separation form.

Typical Applications

• ABB System Pro E Power low-voltage switchboard assemblies.
• Fixed-frame installations within compatible electrical distribution cabinets.
• Industrial main distribution boards.
• Commercial building electrical distribution switchboards.
• Modular switchboard configurations requiring a 2,000 mm-high fixed frame.
• Compatible internal arrangements requiring a 600 mm-wide frame.
• Professional electrical panel manufacturing and assembly.
• Integration of compatible ABB internal mounting and structural accessories.
• Refurbishment and replacement of matching ABB fixed frame components.
• Low-voltage power distribution infrastructure projects.