Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001894B0000 ABB PFFA2040 System Pro E Power Fixed Frame 2000 x 400 mm
ABB PFFA2040 (1STQ001894B0000) System Pro E Power fixed frame accessory with nominal dimensions of 2000 mm high and 400 mm wide, intended for compatible low-voltage switchboard configurations identified by ABB as FIXED FRAME SPEC. SOL.
£213.47
Why Choose the ABB PFFA2040 Fixed Frame for System Pro E Power?
The ABB PFFA2040 (1STQ001894B0000) is a fixed frame accessory designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as FIXED FRAME SPEC. SOL.H=2000MM W=400MM, this component is intended for compatible switchboard assemblies requiring a fixed internal frame with a nominal height of 2,000 mm and width of 400 mm.
The PFFA2040 belongs to ABB's modular switchboard accessory range and supports the construction of organised internal equipment arrangements. Its specified dimensions make it relevant to panel builders selecting a fixed frame for a particular enclosure height, section width and mounting configuration.
The manufacturer description includes SPEC. SOL., indicating a specific ABB configuration designation. The precise application of this designation should be verified against the relevant System Pro E Power technical catalogue and assembly instructions. The PFFA2040 is a fixed frame component, not a complete switchboard enclosure, electrical distribution board or protective device.
Key Advantages
- Genuine ABB System Pro E Power fixed frame accessory.
- Designed for compatible modular low-voltage switchboard assemblies.
- 2,000 mm nominal height for the specified frame arrangement.
- 400 mm nominal width for corresponding switchboard configurations.
- Provides a dedicated fixed-frame solution within ABB's coordinated accessory range.
- Supports structured planning of internal switchboard mounting arrangements.
- Helps panel builders select frame components according to enclosure dimensions.
- Suitable for professional electrical panel manufacturing and assembly.
- Supports maintenance and replacement of compatible ABB fixed frame components.
Key Features
- ABB System Pro E Power product family.
- PFFA2040 manufacturer product designation.
- 1STQ001894B0000 ABB manufacturer ordering code.
- FIXED FRAME SPEC. SOL.H=2000MM W=400MM manufacturer description.
- Fixed frame configuration.
- 2,000 mm nominal height.
- 400 mm nominal width.
- SPEC. SOL. manufacturer configuration reference.
- Intended for compatible low-voltage switchboard structures.
- Supports coordinated internal equipment installation arrangements.
- Part of ABB's modular switchboard construction accessory range.
- Requires compatibility verification against the applicable ABB technical documentation.
Understanding Fixed Frame Installation in System Pro E Power Switchboards
Fixed frames are used in modular electrical switchboard construction to provide a defined structural arrangement for compatible internal components. Selecting the appropriate frame is an important part of planning equipment positions, installation clearances and the relationship between internal mounting accessories and the surrounding enclosure.
The ABB PFFA2040 is identified as a fixed frame with nominal dimensions of 2,000 × 400 mm (H × W). These dimensions are central to product selection, particularly where multiple enclosure heights and section widths are available within the System Pro E Power range.
The fixed-frame designation describes the intended frame configuration. It should not be confused with the mounting version of an individual circuit-breaker. A fixed frame does not, by itself, establish compatibility with every fixed, plug-in or withdrawable protective device; the relevant equipment installation kits and supporting accessories must be selected separately.
The manufacturer's SPEC. SOL. reference is part of the product designation. Because the supplied description does not define this abbreviation in detail, the exact special configuration, associated equipment and mounting requirements should be confirmed using ABB's technical catalogue. Selection should not be based on nominal dimensions alone.
During switchboard design, panel builders should check the intended frame position, fixing points, compatibility with internal uprights or supports, access to equipment and any required segregation components. The complete assembly must be constructed in accordance with ABB's approved installation instructions.
For low-voltage power distribution assemblies designed to BS EN IEC 61439-1 and BS EN IEC 61439-2, the completed switchboard must be assessed and verified for its applicable mechanical and electrical requirements. The PFFA2040 does not independently establish a current rating, short-circuit withstand rating, IP classification or internal separation form.
Typical Applications
- ABB System Pro E Power low-voltage switchboard assemblies.
- Fixed-frame installation arrangements in compatible electrical distribution cabinets.
- Industrial main distribution boards.
- Commercial building electrical distribution switchboards.
- Modular switchboard configurations requiring a 2,000 mm-high fixed frame.
- Compatible internal arrangements requiring a 400 mm-wide frame.
- Professional switchboard manufacturing and assembly.
- Integration of compatible ABB internal mounting and structural accessories.
- Replacement of matching ABB fixed frame components during switchboard refurbishment.
Technical Specifications
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001894B0000 |
| Manufacturer description | FIXED FRAME SPEC. SOL.H=2000MM W=400MM |
| Product type | Fixed frame accessory |
| Product category | Low-voltage switchboard structural and mounting accessories |
| Frame configuration | Fixed |
| Nominal height | 2,000 mm |
| Nominal width | 400 mm |
| Nominal dimensions (H × W) | 2,000 × 400 mm |
| Manufacturer configuration designation | SPEC. SOL. |
| System compatibility | ABB System Pro E Power, subject to the specified configuration |
| Installation application | Fixed-frame arrangement within a compatible low-voltage switchboard |
| Compatible enclosure configuration | To be verified against ABB assembly documentation |
| Material and finish | Refer to ABB product documentation |
| Mounting hardware and kit contents | Refer to ABB installation instructions |
| Ingress protection | Determined by the completed switchboard enclosure |
| Electrical ratings | Determined by the installed equipment and verified switchboard assembly |
Frequently Asked Questions
What is the ABB PFFA2040 1STQ001894B0000 used for?
The ABB PFFA2040 is a fixed frame accessory intended for compatible ABB System Pro E Power low-voltage switchboards. It provides a specified frame arrangement for the relevant internal switchboard configuration.
What are the dimensions of the ABB PFFA2040?
The manufacturer specifies a nominal height of 2,000 mm and a nominal width of 400 mm. These are the dimensions identified in the ABB product description.
What does SPEC. SOL. mean in the ABB PFFA2040 description?
SPEC. SOL. is part of ABB's manufacturer configuration designation. The exact meaning and corresponding installation requirements should be confirmed against the relevant ABB System Pro E Power technical catalogue and assembly instructions.
Does the ABB PFFA2040 include circuit-breakers or other electrical devices?
The PFFA2040 is identified as a fixed frame accessory, not a complete electrical distribution assembly. Circuit-breakers, protection devices and other equipment should not be assumed included. The exact supplied contents must be checked against ABB's product documentation.
Can the ABB PFFA2040 be installed in any 2,000 mm-high System Pro E Power enclosure?
Not automatically. Although the PFFA2040 has a nominal height of 2,000 mm and width of 400 mm, compatibility also depends on the enclosure structure, frame arrangement and SPEC. SOL. configuration. These requirements must be verified using ABB's installation documentation.
Trusted ABB Components for Professional Switchboard Assembly
ABB System Pro E Power offers coordinated structural, mounting and enclosure accessories for professional electrical panel builders and low-voltage distribution specialists. The ABB PFFA2040 (1STQ001894B0000) is a dedicated fixed frame component with nominal dimensions of 2,000 × 400 mm (H × W), intended for compatible System Pro E Power switchboard configurations requiring the specified ABB fixed-frame arrangement.
