Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO8050COL (1STQ001770B0000) System Pro E Power IP65-designated open top/bottom enclosure panel for compatible modular low-voltage switchboards with a nominal width of 800 mm and depth of 500 mm.
£100.69
The ABB PTBO8050COL (1STQ001770B0000) is a purpose-designed IP65 open top/bottom enclosure panel for compatible electrical distribution switchboards within the ABB System Pro E Power modular low-voltage switchboard range. Identified by the manufacturer as IP65 OP TOP/BOTTOM W=800MM D=500MM, this product is specified for a switchboard configuration with a nominal width of 800 mm and depth of 500 mm.
As part of the ABB System Pro E Power series, the PTBO8050COL supports professional electrical enclosure construction by providing an application-specific component for the top or bottom of a compatible switchboard structure. Its open configuration distinguishes it from blind or fully closed enclosure panels, making it relevant to installations where a designated opening must be accommodated within the enclosure design.
The ABB PTBO8050COL IP65 top/bottom panel is intended for corresponding System Pro E Power assemblies requiring an 800 mm wide and 500 mm deep enclosure configuration. Its manufacturer designation identifies an IP65 application, indicating that the component is associated with compatible enclosure systems designed to achieve this ingress protection classification when correctly assembled.
Correct selection of top and bottom enclosure components is important for maintaining the intended mechanical configuration, cable entry arrangement and environmental protection of electrical distribution switchboards. The PTBO8050COL provides a manufacturer-designated solution for compatible ABB enclosure structures, with the completed installation's protection performance dependent on the appropriate sealing, closure and associated components.
Top and bottom enclosure components play an important role in the construction of low-voltage electrical distribution switchboards. These components form part of the enclosure structure and help define the mechanical arrangement of the assembly. Depending on the selected configuration, top and bottom openings may be used to accommodate compatible cable entry systems or other manufacturer-approved installation components.
The ABB PTBO8050COL is specifically identified as an IP65 open top/bottom panel for an enclosure arrangement with nominal dimensions of 800 mm in width and 500 mm in depth. Its open configuration should be distinguished from a blind or fully closed panel. The precise opening geometry and permitted installation arrangements must be established from the relevant ABB technical documentation.
The IP65 classification, as defined by IEC 60529, indicates dust-tight protection and resistance to water jets under the standard's specified test conditions. However, an open top or bottom component does not independently provide IP65 protection to a completed switchboard. The required ingress protection depends on the complete enclosure configuration, including compatible covers, cable entry accessories, sealing systems and installation methods.
When the PTBO8050COL is incorporated into a System Pro E Power assembly, panel builders should ensure that any remaining openings are addressed using manufacturer-approved components appropriate to the required enclosure protection. Cable glands, entry plates, seals and other fitted accessories must be selected and installed in accordance with the applicable technical requirements.
The ABB System Pro E Power range supports modular low-voltage switchboard construction for industrial and commercial electrical distribution applications. The PTBO8050COL contributes to this modular approach by providing a designated open top/bottom component for compatible 800 mm × 500 mm enclosure configurations.
Before installation, engineers should verify the enclosure dimensions, mounting arrangement, associated cable entry or closure components and complete ingress protection requirements against the relevant ABB documentation. The product's IP65 designation must not be interpreted as confirmation that an uncovered opening or incomplete switchboard assembly achieves an IP65 rating.
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001770B0000 |
| Product type | Open top/bottom enclosure panel |
| Manufacturer designation | IP65 OP TOP/BOTTOM W=800MM D=500MM |
| Ingress protection designation | IP65 |
| Nominal width | 800 mm |
| Nominal depth | 500 mm |
| Panel configuration | Open |
| Installation position | Top / bottom |
| Product group | System Pro E Power |
| Application | Low-voltage electrical distribution enclosure construction |
| System compatibility | ABB System Pro E Power modular switchboard assemblies |
The ABB PTBO8050COL is an IP65-designated open top/bottom enclosure panel for compatible ABB System Pro E Power low-voltage switchboards. It provides a manufacturer-specified component for the top or bottom of an appropriate modular enclosure.
The PTBO8050COL is specified for a nominal width of 800 mm and depth of 500 mm. These dimensions identify the intended enclosure configuration and should not be interpreted as confirmation of the precise opening size or overall dimensions of the completed switchboard.
The IP65 designation refers to dust-tight protection and protection against water jets under the relevant IEC 60529 test conditions. Because the PTBO8050COL has an open configuration, the completed enclosure requires appropriate compatible closure, sealing or cable entry components to achieve its intended ingress protection.
The manufacturer designation identifies the PTBO8050COL as an open top/bottom component. Its use in either position must follow the applicable ABB System Pro E Power assembly instructions, including the correct mounting and associated sealing arrangements.
The ABB manufacturer order code is 1STQ001770B0000, and the product reference is PTBO8050COL. This enclosure accessory belongs to the ABB System Pro E Power product group.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The PTBO8050COL IP65-designated open top/bottom panel supports compatible 800 mm wide and 500 mm deep enclosure configurations, helping electrical contractors, switchboard manufacturers and system integrators select application-specific components for properly engineered electrical distribution infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.