Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001743B0000 ABB PPEB1866COL IP65 Blind Back Panel 1800 x 600 mm System pro E power
ABB PPEB1866COL (1STQ001743B0000) System pro E power IP65 blind back panel with a nominal height of 1800 mm and width of 600 mm, designed to provide solid rear closure for compatible low-voltage electrical distribution enclosures.
£186.18
Why Choose the ABB PPEB1866COL IP65 Blind Back Panel?
The ABB PPEB1866COL (1STQ001743B0000) is a dedicated IP65 blind back panel designed for compatible low-voltage electrical distribution switchboards. As part of the ABB System pro E power range, this enclosure accessory provides a solid rear closure solution for modular electrical cabinets used in industrial and commercial power distribution installations.
The PPEB1866COL is designed to close the rear of compatible switchboard enclosures, helping protect internal electrical equipment from external contact and environmental contaminants when correctly installed as part of a complete assembly. Its blind panel configuration provides a continuous rear covering without the openings associated with ventilated or access-specific panel designs, supporting a neat and enclosed switchboard construction.
With a specified height of 1800 mm, width of 600 mm and an IP65 protection configuration, the PPEB1866COL is intended for compatible ABB System pro E power enclosure arrangements. It is suitable for electrical panel builders and switchgear manufacturers requiring a dedicated rear enclosure panel for applications where protection against dust ingress and water jets is an important design consideration.
Key Advantages
- Purpose-designed IP65 blind back panel for compatible electrical distribution enclosures.
- Part of the modular ABB System pro E power switchboard range.
- 1800 mm nominal height for the specified enclosure configuration.
- 600 mm nominal width for compatible switchboard structures.
- Blind rear panel design provides a solid enclosure closure without ventilation openings.
- Supports IP65-rated enclosure configurations when correctly installed with compatible components.
- Helps protect enclosed electrical equipment against dust and water ingress as part of a correctly assembled enclosure.
- Provides a professional rear finish for industrial and commercial electrical cabinets.
- Designed for integration with compatible ABB System pro E power structural and enclosure accessories.
Key Features
- ABB System pro E power modular switchboard accessory.
- PPEB1866COL manufacturer product designation.
- 1STQ001743B0000 ABB order code.
- IP65 blind back panel configuration.
- 1800 mm nominal panel height.
- 600 mm nominal panel width.
- Solid rear enclosure panel without intentional ventilation openings.
- Designed for compatible low-voltage electrical distribution cabinets.
- Supports the construction of enclosed switchboard assemblies requiring enhanced ingress protection.
- Provides rear closure for the designated ABB System pro E power enclosure configuration.
- Suitable for professional electrical panel building and switchgear assembly.
Reliable IP65 Rear Enclosure Protection for Electrical Switchboards
Rear enclosure panels are important components in the construction of low-voltage electrical distribution switchboards. They provide a physical closure at the back of the cabinet, helping prevent unintended access to internal equipment and contributing to the environmental protection of the completed assembly. The ABB PPEB1866COL is specifically designed as a blind rear panel for compatible 1800 × 600 mm System pro E power enclosure arrangements.
An IP65 protection rating, as defined by IEC 60529, indicates a dust-tight enclosure with protection against water jets. The PPEB1866COL is specified for IP65 enclosure configurations, but the protection rating of the completed switchboard depends on correct installation, compatible enclosure components, suitable sealing arrangements and the integrity of all doors, joints and cable entries.
The ABB System pro E power range provides a modular platform for constructing industrial and commercial low-voltage distribution assemblies. The PPEB1866COL forms part of this coordinated enclosure system and should be installed using the appropriate ABB mounting accessories and assembly instructions. The complete switchboard must be assessed against its required environmental and electrical protection specifications.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Compatible IP65 electrical enclosure assemblies.
- Industrial main power distribution cabinets.
- Commercial building electrical distribution panels.
- Electrical switchboards requiring solid rear enclosure closure.
- Dust-protected electrical distribution installations.
- Industrial electrical cabinets requiring protection against water jets.
- Professional electrical panel building and switchgear manufacturing.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ001743B0000 |
| Manufacturer description | IP65 BLIND BACK PANEL H=1800MM W=600MM |
| Product type | Blind rear enclosure panel |
| Accessory category | Electrical switchboard back panels |
| Protection configuration | IP65 |
| Ingress protection standard | IEC 60529 |
| Dust protection | Dust-tight enclosure configuration |
| Water protection | Protection against water jets in a correctly assembled IP65 enclosure |
| Panel design | Blind / solid |
| Installation position | Rear of enclosure |
| Nominal panel height | 1800 mm |
| Nominal panel width | 600 mm |
| Specified dimensions (H × W) | 1800 × 600 mm |
| Installation system | ABB System pro E power |
| Application | Low-voltage electrical distribution enclosure construction |
| Equipment category | Electrical enclosure closure accessories |
Frequently Asked Questions
What is the ABB PPEB1866COL used for?
The ABB PPEB1866COL is an IP65 blind back panel designed to provide a solid rear closure for compatible ABB System pro E power low-voltage electrical distribution enclosures.
What are the dimensions of the ABB PPEB1866COL?
The PPEB1866COL is specified with a nominal 1800 mm height and 600 mm width, making it suitable for the corresponding compatible ABB System pro E power enclosure configuration.
What does the IP65 rating mean for this back panel?
IP65 indicates protection against dust ingress and water jets when the panel is correctly incorporated into a suitable enclosure assembly. The completed switchboard must use compatible sealing and mounting components to achieve the required ingress protection rating.
What is a blind back panel?
A blind back panel is a solid enclosure closure panel without intentional ventilation or equipment access openings. It is used to close the rear of a compatible electrical cabinet and contribute to the enclosure's protective construction.
Which electrical enclosure system is compatible with the PPEB1866COL?
The PPEB1866COL belongs to the ABB System pro E power range and is designed for compatible low-voltage switchboard enclosures with the specified 1800 × 600 mm configuration. The exact enclosure structure and required sealing accessories should be checked before installation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power provides a modular platform for professional low-voltage electrical distribution assemblies. The PPEB1866COL IP65 blind back panel supports the construction of compatible 1800 × 600 mm switchboard enclosures, helping electrical panel builders achieve organised rear closure arrangements and appropriate environmental protection for industrial and commercial power distribution installations.
