1STQ001594B0000 ABB PLLS3070 System Pro E Power Lexan Vertical Lateral Segregation 300 x 700 mm

1STQ001594B0000 ABB PLLS3070 System Pro E Power Lexan Vertical Lateral Segregation 300 x 700 mm

ABB PLLS3070 (1STQ001594B0000) System Pro E Power Lexan vertical lateral segregation accessory with nominal dimensions of 300 mm high and 700 mm deep, intended for compatible low-voltage switchboard internal separation arrangements.

SKU: 1STQ001594B0000Alt SKU: PLLS3070MPN: 1STQ001594B0000
Price
List Price £190.80 ex VAT
Your Price (ex VAT)
£190.80
Manufacturer Lead Time Estimated Delivery 6 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £190.80
Trade pricing is personalised to your account

Manufacturer Lead Time

£190.80

Why Choose the ABB PLLS3070 Lexan Vertical Lateral Segregation Panel for System Pro E Power?

The ABB PLLS3070 (1STQ001594B0000) is a Lexan vertical lateral segregation accessory designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as VER.LAT.SEGR.LEXAN H=300MM D=700MM IN.UP, this component is intended for compatible internal switchboard configurations requiring a vertical side partition.

With a specified 300 mm nominal height and 700 mm nominal depth, the PLLS3070 provides a dimension-specific solution for electrical panel builders designing internal separation arrangements. Its Lexan polycarbonate material designation and vertical lateral configuration distinguish it from metallic segregation accessories, horizontal partitions and front-facing barriers.

The manufacturer description also includes IN.UP, an ABB installation configuration reference that must be matched to the appropriate System Pro E Power assembly documentation. The PLLS3070 is an internal segregation component, not a complete enclosure, electrical protective device or independently certified switchboard separation system.

Key Advantages

  • Genuine ABB System Pro E Power internal segregation accessory for modular low-voltage switchboards.
  • Designed for vertical lateral separation in compatible electrical distribution assemblies.
  • Specified Lexan polycarbonate material for the designated segregation application.
  • 300 mm nominal height for the intended internal compartment arrangement.
  • 700 mm nominal depth for compatible switchboard configurations.
  • Supports organised separation between designated internal switchboard areas.
  • Provides a manufacturer-specific segregation component for coordinated panel construction.
  • Helps panel builders select accessories according to the required compartment dimensions.
  • Suitable for professional switchboard manufacturing, installation and refurbishment.

Key Features

  • ABB System Pro E Power product family.
  • PLLS3070 manufacturer product designation.
  • 1STQ001594B0000 ABB manufacturer ordering code.
  • VER.LAT.SEGR.LEXAN H=300MM D=700MM IN.UP manufacturer description.
  • Vertical lateral segregation configuration.
  • Lexan polycarbonate material designation.
  • 300 mm nominal height.
  • 700 mm nominal depth.
  • Internal switchboard installation application.
  • IN.UP manufacturer configuration reference.
  • Designed for integration with compatible ABB System Pro E Power structures.
  • Supports modular internal segregation arrangements.
  • Requires installation in accordance with applicable ABB assembly instructions.

Understanding Lexan Vertical Lateral Segregation in Low-Voltage Switchboards

Internal segregation is an important consideration in low-voltage switchboard design. Depending on the required assembly arrangement, partitions and barriers can help establish separation between functional units, busbar spaces, cable connection areas and other designated internal compartments.

The ABB PLLS3070 is specifically designated for vertical lateral segregation. Its intended function is to form part of a side separation arrangement within a compatible System Pro E Power structure. It should not be confused with a horizontal partition or a front segregation panel, as these components serve different positions within the assembly.

The manufacturer's LEXAN designation identifies a polycarbonate material. Polycarbonate can offer useful electrical insulating and mechanical properties when appropriately specified for an application. However, the precise transparency, thickness, impact resistance, flame classification and dielectric performance of the PLLS3070 must be verified against ABB's technical documentation rather than assumed from the material name.

The 300 × 700 mm specification describes the component's nominal height and depth. It should not be interpreted as a height-and-width measurement. This distinction is particularly important when selecting segregation accessories for switchboards with different enclosure depths.

The IN.UP reference forms part of ABB's manufacturer description. Its exact interpretation, mounting requirements and associated structural components should be checked against the relevant System Pro E Power catalogue and assembly instructions before installation.

Internal separation arrangements are considered during the design and verification of assemblies under BS EN IEC 61439-1 and BS EN IEC 61439-2. Installing the PLLS3070 alone does not establish Form 2, Form 3 or Form 4 segregation. The achieved classification depends on the complete arrangement of barriers, compartments, functional units and electrical connections.

The PLLS3070 does not independently establish a current rating, short-circuit withstand rating, enclosure IP rating or arc-fault protection classification. These characteristics must be verified for the completed switchboard assembly.

Typical Applications

  • ABB System Pro E Power low-voltage switchboard assemblies.
  • Vertical lateral segregation within compatible electrical distribution cabinets.
  • Internal separation of designated switchboard equipment areas.
  • Industrial electrical power distribution assemblies.
  • Commercial building low-voltage distribution switchboards.
  • Compatible internal layouts requiring a 300 mm-high lateral segregation component.
  • Switchboard configurations specified for a 700 mm nominal segregation depth.
  • Modular switchboard manufacturing and assembly.
  • Maintenance and replacement of compatible ABB internal segregation accessories.
  • Professional electrical panel construction and refurbishment projects.

Technical Specifications

Series System Pro E Power
ABB order code 1STQ001594B0000
Manufacturer description VER.LAT.SEGR.LEXAN H=300MM D=700MM IN.UP
Product type Vertical lateral segregation accessory
Product category Low-voltage switchboard internal segregation components
Material designation Lexan polycarbonate
Nominal height 300 mm
Nominal depth 700 mm
Nominal dimensions (H × D) 300 × 700 mm
Segregation orientation Vertical
Segregation position Lateral (side)
Installation location Internal switchboard structure
Manufacturer configuration reference IN.UP
System compatibility ABB System Pro E Power, subject to the specified installation arrangement
Application Internal vertical lateral separation in compatible low-voltage switchboards
Internal separation classification Determined by the complete switchboard assembly
Ingress protection Determined by the completed enclosure assembly

Frequently Asked Questions

What is the ABB PLLS3070 1STQ001594B0000 used for?

The ABB PLLS3070 is a Lexan vertical lateral segregation accessory for compatible ABB System Pro E Power low-voltage switchboards. It is intended to form part of a specified internal side separation arrangement.

What are the dimensions of the ABB PLLS3070?

The manufacturer specifies a nominal height of 300 mm and a nominal depth of 700 mm. These dimensions are expressed as height × depth, not height × width.

What is the difference between the ABB PLLS3070 and PLLS3050?

Both products are Lexan vertical lateral segregation accessories with a nominal height of 300 mm. The PLLS3070 is specified for a 700 mm depth, while the PLLS3050 is specified for a 500 mm depth. The correct version must be selected according to the intended ABB switchboard configuration.

What does IN.UP mean in the ABB PLLS3070 description?

IN.UP is part of ABB's manufacturer installation configuration reference. Its precise meaning, mounting arrangement and compatibility requirements should be verified against the applicable System Pro E Power technical documentation.

Does the ABB PLLS3070 provide Form 4 internal segregation on its own?

No. The PLLS3070 is an individual internal segregation component. Form 4 or any other internal separation classification depends on the complete switchboard design and the correct installation of all required barriers, partitions and connection separations.

Trusted ABB Components for Professional Switchboard Assembly

ABB System Pro E Power provides coordinated enclosure, mounting and internal segregation accessories for professional electrical panel builders and low-voltage distribution specialists. The ABB PLLS3070 (1STQ001594B0000) is a dedicated Lexan vertical lateral segregation component with nominal dimensions of 300 × 700 mm (H × D), intended for compatible switchboard configurations requiring carefully planned internal separation.