Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PLLS3050 (1STQ001593B0000) System Pro E Power Lexan vertical lateral segregation accessory with nominal dimensions of 300 mm high and 500 mm deep, intended for compatible low-voltage switchboard internal separation arrangements.
£73.59
The ABB PLLS3050 (1STQ001593B0000) is a Lexan vertical lateral segregation accessory designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as VER.LAT.SEGR.LEXAN H=300MM D=500MM IN.UP, this component is intended for compatible internal switchboard arrangements requiring a vertical side partition.
With a specified 300 mm nominal height and 500 mm nominal depth, the PLLS3050 provides a dimension-specific segregation solution for electrical panel builders. The manufacturer's LEXAN designation identifies the specified polycarbonate material, while VER.LAT.SEGR. describes its vertical lateral segregation function.
The product description also includes IN.UP, an ABB installation configuration reference that should be matched to the relevant System Pro E Power assembly instructions. The PLLS3050 is an internal segregation component, not a complete enclosure, electrical protective device or independently certified switchboard separation system.
Internal segregation components are used in low-voltage switchboards to help establish defined separation between designated equipment areas. Depending on the assembly design, partitions may form part of the separation between functional units, busbar spaces, connection areas or other internal compartments.
The ABB PLLS3050 is specifically designated as a vertical lateral segregation component. This means its intended position is at the side of a designated internal area, rather than as a horizontal partition or front-facing barrier. Correct selection depends on the planned compartment arrangement and the surrounding System Pro E Power structure.
The manufacturer's LEXAN designation identifies a polycarbonate material. Polycarbonate is commonly selected for engineered electrical components because it can provide useful mechanical and electrical insulating properties when correctly specified. However, the precise transparency, thickness, impact resistance, flame classification and dielectric performance of the PLLS3050 should be confirmed from ABB's product documentation rather than assumed from the material name alone.
The 300 × 500 mm specification refers to the component's nominal height and depth. It should not be interpreted as a height-and-width measurement. These dimensions are important when selecting a partition for a compatible switchboard depth and internal compartment layout.
The designation IN.UP is part of ABB's manufacturer description and identifies a particular installation configuration. Its exact interpretation, required mounting positions and associated accessories should be verified using the relevant ABB System Pro E Power assembly instructions.
Internal separation arrangements are considered as part of switchboard design under the applicable requirements of BS EN IEC 61439-1 and BS EN IEC 61439-2. Installing an individual segregation panel does not independently establish Form 2, Form 3 or Form 4 separation. The achieved classification depends on the complete arrangement of barriers, compartments, functional units and electrical connections.
The PLLS3050 does not independently establish a current rating, short-circuit withstand rating, enclosure IP rating or arc-fault protection classification. The complete switchboard must be designed, assembled and verified according to the applicable technical requirements.
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001593B0000 |
| Manufacturer description | VER.LAT.SEGR.LEXAN H=300MM D=500MM IN.UP |
| Product type | Vertical lateral segregation accessory |
| Product category | Low-voltage switchboard internal segregation components |
| Material designation | Lexan polycarbonate |
| Nominal height | 300 mm |
| Nominal depth | 500 mm |
| Nominal dimensions (H × D) | 300 × 500 mm |
| Segregation orientation | Vertical |
| Segregation position | Lateral (side) |
| Installation location | Internal switchboard structure |
| Manufacturer configuration reference | IN.UP |
| System compatibility | ABB System Pro E Power, subject to the specified installation arrangement |
| Application | Internal vertical lateral separation in compatible low-voltage switchboards |
| Internal separation classification | Determined by the complete switchboard assembly |
| Ingress protection | Determined by the completed enclosure assembly |
The ABB PLLS3050 is a Lexan vertical lateral segregation accessory for compatible ABB System Pro E Power low-voltage switchboards. It is intended to form part of a specified internal separation arrangement.
The manufacturer specifies a nominal height of 300 mm and a nominal depth of 500 mm. The dimensions are expressed as height × depth, not height × width.
ABB identifies the component with the LEXAN designation, referring to a polycarbonate material. Any specific mechanical, optical, thermal or electrical performance properties should be verified against ABB's technical documentation.
IN.UP is part of ABB's manufacturer installation configuration reference. Its precise meaning and compatibility requirements should be confirmed against the applicable System Pro E Power catalogue and assembly instructions.
No. The PLLS3050 is an individual internal segregation component. Form 4 or any other internal separation classification depends on the complete switchboard arrangement, including all required barriers, partitions and connection separations.
ABB System Pro E Power provides coordinated enclosure, mounting and internal segregation accessories for professional electrical panel builders and low-voltage distribution specialists. The ABB PLLS3050 (1STQ001593B0000) is a dedicated Lexan vertical lateral segregation component with nominal dimensions of 300 × 500 mm (H × D), intended for compatible switchboard configurations requiring carefully planned internal separation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.