Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHW4092 System pro E power horizontal Form 3b segregation accessory, order code 1STQ001577B0000, designed for compatible 3-pole E2.2 circuit-breaker arrangements in low-voltage switchboards with a nominal cabinet width of 400 mm and depth of 900 mm.
£155.05
The ABB PSHW4092 is a dedicated Form 3b horizontal segregation accessory for compatible ABB System pro E power low-voltage switchboard assemblies. Specifically designated for an ABB E2.2 3-pole circuit-breaker arrangement, this component is intended for switchboard configurations measuring 400 mm wide × 900 mm deep.
Internal segregation is an important aspect of professional electrical switchboard construction, helping establish defined separation between busbars, functional units and associated connection areas. The PSHW4092 supports the implementation of a manufacturer-specified Form 3b (F3B) horizontal separation arrangement within compatible System pro E power assemblies incorporating ABB E2.2 circuit-breaker equipment.
Identified by ABB order code 1STQ001577B0000 and the manufacturer designation HORIZ.SEG.F3B 3P W E2.2 W=400MM D=900MM, the PSHW4092 provides a clearly specified segregation component for professional switchgear manufacturers, electrical panel builders and engineers designing compatible low-voltage distribution systems.
Form 3b describes an internal separation arrangement used in low-voltage switchboard assemblies. Within the IEC 61439 framework, Form 3 arrangements provide separation between busbars and functional units, together with separation between individual functional units. Form 3b additionally provides separation of terminals for external conductors from the busbars.
The ABB PSHW4092 is specifically designated as a horizontal segregation component for Form 3b. It is intended to form part of the mechanical partitioning arrangement within a compatible System pro E power switchboard.
Horizontal segregation components help establish separation boundaries between designated areas of an electrical cabinet. Correct selection depends on the enclosure configuration, protective-device arrangement, internal component layout and the overall switchboard separation design.
For the PSHW4092, the manufacturer specifies an ABB E2.2 3-pole circuit-breaker arrangement and a nominal cabinet configuration of 400 mm width × 900 mm depth. These dimensions describe the intended switchboard configuration and should not automatically be treated as the physical dimensions of the individual segregation component.
The PSHW4092 is an individual segregation accessory rather than a complete Form 3b partitioning system. Achieving the intended separation classification requires the correct combination of compatible internal partitions, equipment mounting components and assembly procedures.
The ABB E2.2 frame belongs to the ABB Emax 2 air circuit-breaker family, used in low-voltage electrical power distribution applications. These circuit breakers may be incorporated into modular switchboard assemblies where mechanical mounting, busbar connections and internal separation arrangements must be coordinated.
The PSHW4092 is specifically designated for a 3-pole E2.2 configuration. Compatibility with a particular E2.2 breaker variant, mounting arrangement or associated connection system should be confirmed against the applicable ABB System pro E power technical documentation.
The 900 mm nominal cabinet depth is an important selection parameter. It distinguishes the PSHW4092 from horizontal segregation accessories specified for shallower cabinet configurations, even where the circuit-breaker family, pole arrangement and nominal cabinet width are otherwise similar.
When planning an installation, panel builders should coordinate the segregation component with the relevant enclosure structure, E2.2 mounting arrangement, busbar layout, terminal locations and any additional vertical or horizontal partitions required by the complete assembly.
Installation must follow the applicable ABB instructions and the electrical design requirements of the completed switchboard, including mechanical clearances, access arrangements, thermal performance and the intended internal separation classification.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001577B0000 |
| Manufacturer designation | HORIZ.SEG.F3B 3P W E2.2 W=400MM D=900MM |
| Product type | Horizontal segregation accessory |
| Product category | Electrical Switchgear Internal Segregation Accessories |
| Segregation form | Form 3b (F3B) |
| Segregation orientation | Horizontal |
| Compatible circuit-breaker family | ABB E2.2 |
| Number of circuit-breaker poles | 3 |
| Nominal cabinet width | 400 mm |
| Nominal cabinet depth | 900 mm |
| Intended function | Internal horizontal segregation in compatible switchboard assemblies |
| Equipment type | Low-voltage electrical distribution switchboards |
| Compatible enclosure system | ABB System pro E power |
| Accessory classification | Mechanical switchboard segregation component |
The ABB PSHW4092 is a horizontal segregation accessory designed for a compatible Form 3b System pro E power switchboard arrangement incorporating an ABB E2.2 3-pole circuit breaker in a cabinet configuration measuring 400 mm wide × 900 mm deep.
F3B refers to Form 3b internal segregation, an arrangement involving separation between busbars and functional units, separation between functional units, and separation of external conductor terminals from the busbars.
The PSHW4092 is designated for a compatible ABB E2.2 3-pole circuit-breaker arrangement. The complete installation configuration should be checked against the relevant ABB technical documentation.
The manufacturer specifies a nominal cabinet width of 400 mm and a nominal cabinet depth of 900 mm. These dimensions identify the intended switchboard configuration rather than confirmed overall dimensions of the segregation accessory itself.
The PSHW4092 is specifically designated for horizontal segregation, indicated by HORIZ.SEG. in the manufacturer description.
Both accessories are designated for Form 3b horizontal segregation with an ABB E2.2 3-pole arrangement and a nominal cabinet width of 400 mm. The PSHW4092 is specified for a 900 mm cabinet depth, whereas the PSHW4072 is specified for a 700 mm cabinet depth.
No. The PSHW4092 is an individual horizontal segregation accessory. The complete Form 3b separation arrangement depends on the correct selection and installation of all required switchboard partitions and associated components.
The ABB manufacturer order code is 1STQ001577B0000, corresponding to model PSHW4092 in the System pro E power range.
ABB System pro E power segregation accessories support professional low-voltage switchboard construction and the implementation of specified internal separation arrangements. The ABB PSHW4092 provides a manufacturer-designated horizontal Form 3b segregation component for compatible 3-pole E2.2 circuit-breaker installations in switchboard configurations measuring 400 mm wide × 900 mm deep.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.