Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHW4051 (1STQ001571B0000) System Pro E Power horizontal internal segregation accessory for Form 3b applications involving compatible Emax E1.2 three-pole or four-pole circuit-breakers in a vertical installation arrangement, with nominal segregation dimensions of 400 x 500 mm.
£119.25
The ABB PSHW4051 (1STQ001571B0000) is a horizontal internal segregation accessory designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as SEGR.HOR.F3B E1.2 3/4P V. 400X500MM, this component is intended for compatible switchboard configurations incorporating an ABB Emax E1.2 three-pole or four-pole circuit-breaker in a vertical installation arrangement.
The PSHW4051 is specified for a 400 × 500 mm segregation arrangement and is associated with Form 3b internal separation. It supports the construction of designated horizontal barriers within compatible main distribution boards, helping electrical panel builders organise the separation of functional areas in modular low-voltage electrical assemblies.
As part of the ABB System Pro E Power series, the PSHW4051 provides a manufacturer-designated accessory for the specified Emax E1.2 installation. Its compatibility requirements include the circuit-breaker family, pole configuration, vertical arrangement and segregation dimensions. The product is an internal segregation component, not a complete circuit-breaker, enclosure or independently certified Form 3b assembly.
Internal segregation is an important aspect of low-voltage switchboard design. Depending on the required assembly configuration, partitions and barriers are used to separate designated internal areas, including busbars, functional units and associated connection spaces. Selecting the appropriate segregation accessories helps establish a coordinated arrangement within the enclosure.
The ABB PSHW4051 is specifically identified as a horizontal segregation component for Form 3b applications. Its manufacturer designation includes E1.2 3/4P, indicating the intended ABB Emax E1.2 circuit-breaker family and compatibility with three-pole or four-pole configurations.
The designation also includes V., indicating a vertical circuit-breaker installation arrangement. This describes the associated equipment configuration and should not be confused with the orientation of the segregation component itself, which is specified as horizontal.
The 400 × 500 mm specification identifies the nominal segregation arrangement for which the PSHW4051 is designated. These dimensions should be used alongside ABB's installation drawings to confirm the correct internal layout, mounting points and compatibility with neighbouring switchboard components.
In low-voltage assemblies, Form 3b internal separation generally involves separation of busbars from functional units, separation of functional units from one another and separation of terminals for external conductors from the busbars and functional units. The precise arrangement must comply with the applicable requirements and agreed assembly specification.
Although the PSHW4051 is designated for a Form 3b application, installing this accessory alone does not establish Form 3b compliance. The completed assembly must incorporate the appropriate combination of partitions, barriers, compartments and connections, with verification against the applicable requirements of BS EN IEC 61439-1 and BS EN IEC 61439-2.
The PSHW4051 should be selected and installed according to ABB's System Pro E Power documentation. The accessory does not independently establish a rated current, short-circuit withstand rating, enclosure IP rating or arc-fault protection classification. These characteristics depend on the complete switchboard design and its verified construction.
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001571B0000 |
| Manufacturer description | SEGR.HOR.F3B E1.2 3/4P V. 400X500MM |
| Product type | Horizontal internal segregation accessory |
| Product category | Low-voltage switchboard internal segregation components |
| Segregation orientation | Horizontal |
| Specified segregation application | Form 3b (F3B) |
| Compatible circuit-breaker family | ABB Emax |
| Compatible circuit-breaker model | E1.2 |
| Compatible pole configurations | 3P / 4P |
| Circuit-breaker installation arrangement | Vertical |
| Nominal segregation dimensions | 400 × 500 mm |
| Installation location | Internal switchboard structure |
| System compatibility | ABB System Pro E Power, subject to the specified configuration |
| Application | Horizontal internal segregation for compatible Emax E1.2 three-pole and four-pole installations |
| Achieved internal separation classification | Dependent on the complete switchboard assembly |
| Ingress protection | Determined by the completed enclosure assembly |
| Electrical ratings | Determined by the selected equipment and verified switchboard design |
The ABB PSHW4051 is a horizontal internal segregation accessory designed for compatible ABB Emax E1.2 three-pole or four-pole circuit-breaker installations within System Pro E Power switchboards. It is specified for Form 3b applications and a vertical circuit-breaker arrangement.
The manufacturer specifies a 400 × 500 mm nominal segregation arrangement. These dimensions should be checked against the relevant ABB installation drawings when selecting the accessory for a particular switchboard configuration.
Yes. The manufacturer's 3/4P designation identifies compatibility with the specified three-pole and four-pole Emax E1.2 configurations. The complete installation arrangement must still be checked against ABB's technical documentation.
The V. designation refers to the vertical circuit-breaker installation arrangement associated with this accessory. The segregation component itself is specified as horizontal, as indicated by SEGR.HOR. in the manufacturer description.
No. The PSHW4051 is intended for a Form 3b segregation arrangement, but the achieved classification depends on the complete switchboard construction. All required barriers, partitions, functional-unit separations and connection arrangements must be correctly selected and installed.
ABB System Pro E Power provides coordinated enclosure, circuit-breaker installation and internal segregation accessories for professional electrical panel builders and low-voltage distribution specialists. The ABB PSHW4051 (1STQ001571B0000) is a dedicated Form 3b horizontal segregation accessory for compatible Emax E1.2 three-pole and four-pole vertical installations, specified for a 400 × 500 mm arrangement within the System Pro E Power platform.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.