1STQ001482B0000 ABB PFBS1020 System Pro E Power Vertical Front Internal Segregation 2000 x 200 mm

Why Choose the ABB PFBS1020 Vertical Front Segregation Panel for System Pro E Power?

The ABB PFBS1020 (1STQ001482B0000) is a vertical front internal segregation component designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as SEGR.VERT.FRONT INT.CC H=2000MM W=200MM, this accessory is intended for compatible switchboard arrangements requiring vertical front separation within the internal structure.

With a specified 2,000 mm nominal height and 200 mm nominal width, the PFBS1020 provides a dimension-specific solution for electrical panel builders planning internal segregation in full-height distribution assemblies. Its vertical front configuration distinguishes it from horizontal partitions, rear segregation components and other switchboard accessories.

The manufacturer description includes the configuration reference INT.CC, which must be matched to the appropriate ABB internal arrangement. As part of the System Pro E Power modular platform, the PFBS1020 supports coordinated switchboard construction using compatible enclosure structures and segregation accessories. It is an internal component rather than a complete enclosure or independently rated protective barrier assembly.

Key Advantages

• Genuine ABB System Pro E Power internal segregation accessory.
• Designed for vertical front segregation in compatible low-voltage switchboards.
• 2,000 mm nominal height for the specified internal arrangement.
• 200 mm nominal width for corresponding switchboard configurations.
• Supports planned separation of designated internal switchboard areas.
• Provides a system-specific component for coordinated internal partition construction.
• Suitable for integration with compatible ABB System Pro E Power structural accessories.
• Supports professional switchboard manufacturing, assembly and refurbishment.

Key Features

• ABB System Pro E Power product family.
• PFBS1020 manufacturer product designation.
• 1STQ001482B0000 ABB manufacturer ordering code.
• SEGR.VERT.FRONT INT.CC H=2000MM W=200MM manufacturer description.
• Vertical front segregation configuration.
• Internal switchboard installation application.
• 2,000 mm nominal height.
• 200 mm nominal width.
• Specified for the manufacturer's INT.CC internal configuration.
• Designed for compatible modular low-voltage distribution assemblies.
• Supports coordinated selection of internal separation components.
• Requires installation according to the applicable ABB System Pro E Power assembly instructions.

Understanding Vertical Front Segregation in System Pro E Power Switchboards

Internal segregation is an important consideration in the design of low-voltage electrical switchboards. Depending on the assembly requirements, partitions and barriers may be used to establish separation between designated equipment areas, functional units, busbar spaces or cable connection zones. The correct arrangement depends on the complete electrical and mechanical design.

The ABB PFBS1020 is identified as a vertical front internal segregation component with nominal dimensions of 2,000 × 200 mm. Its dimensions help panel builders identify the intended enclosure configuration and distinguish it from shorter segregation accessories, including the corresponding 1,800 mm-high version.

The INT.CC reference is part of ABB's manufacturer description and identifies a particular internal configuration. Its precise application, mounting positions and associated components should be confirmed against the relevant ABB System Pro E Power technical documentation. The PFBS1020 should not be assumed compatible with every enclosure solely because its nominal height and width appear suitable.

Internal separation arrangements are commonly considered when designing assemblies to meet the applicable requirements of BS EN IEC 61439. However, installing a single segregation accessory does not automatically establish Form 2, Form 3 or Form 4 internal separation. The achieved classification depends on the complete arrangement of partitions, barriers, functional units, terminals and connections.

Installation should follow ABB's approved assembly instructions, including the requirements for mounting, electrical clearances, access to equipment and routing of conductors. The PFBS1020 does not independently establish an enclosure IP rating, short-circuit withstand capability or electrical current rating. These characteristics must be verified for the complete switchboard assembly.

Typical Applications

• ABB System Pro E Power low-voltage switchboard assemblies.
• Vertical front segregation within compatible electrical distribution cabinets.
• Industrial power distribution switchboards requiring planned internal separation.
• Commercial building electrical distribution assemblies.
• Switchboard configurations requiring a 2,000 mm-high segregation component.
• Compatible internal layouts using a 200 mm-wide vertical front partition.
• Modular electrical switchboard manufacturing and assembly.
• Refurbishment or replacement of compatible ABB internal segregation accessories.
• Professional low-voltage electrical infrastructure projects.