Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001473B0000 ABB PHDX3423 XT3 Kit 3-4P Fixed + RCD Horizontal Installation 800mm
ABB PHDX3423 XT3 Installation Kit, order code 1STQ001473B0000, is a System Pro E Power accessory for compatible 3-pole and 4-pole fixed XT3 circuit breaker arrangements with RCD, specified for horizontal installation in 800 mm-wide electrical distribution assemblies.
£172.29
Why Choose the ABB PHDX3423 XT3 Installation Kit?
The ABB PHDX3423, manufacturer order code 1STQ001473B0000, is a dedicated XT3 installation kit for 3- and 4-pole fixed circuit breakers with RCD from the ABB System Pro E Power product group. Identified by the manufacturer designation XT3 KIT 3-4P FIXED+RCD.HOR.INST. W=800MM, this accessory is specified for horizontal installation in compatible electrical distribution assemblies with a nominal width of 800 mm.
The ABB PHDX3423 XT3 Kit supports the integration of compatible ABB XT3 circuit breaker arrangements incorporating a residual current device (RCD). Its designation identifies a fixed breaker configuration, compatibility references for both 3-pole and 4-pole arrangements, and a horizontal installation orientation.
As part of the ABB System Pro E Power range, the PHDX3423 is intended for professional low-voltage electrical distribution panel construction and switchgear assembly projects. Its manufacturer-specific configuration helps panel builders and electrical contractors identify the appropriate installation kit for compatible XT3 equipment and 800 mm-wide assembly arrangements.
Key Advantages
- Genuine ABB XT3 installation kit from the System Pro E Power product group.
- Designed for compatible 3-pole and 4-pole XT3 circuit breaker arrangements.
- Specified for fixed circuit breaker installation.
- Includes an RCD configuration reference for compatible residual current device arrangements.
- Dedicated horizontal installation configuration.
- Designed for the specified 800 mm assembly width.
- Supports integration of compatible switching and protective equipment into electrical distribution assemblies.
- Helps panel builders identify the correct manufacturer-specified installation arrangement.
- Suitable for professional electrical switchboard construction and refurbishment.
- ABB order code 1STQ001473B0000 enables accurate identification, specification and procurement.
Key Features
- ABB System Pro E Power product group.
- ABB PHDX3423 XT3 Installation Kit.
- Manufacturer order code: 1STQ001473B0000.
- XT3 circuit breaker family reference.
- 3-4P designation for 3-pole and 4-pole configurations.
- Fixed circuit breaker installation arrangement.
- RCD configuration reference.
- Horizontal installation orientation.
- 800 mm specified assembly width.
- Dedicated installation kit for compatible low-voltage distribution assemblies.
- Manufacturer-specific accessory for electrical panel building and equipment integration.
- Clearly identified by the ABB PHDX3423 model and 1STQ001473B0000 order code.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Model: PHDX3423
- Product designation: XT3 KIT 3-4P FIXED+RCD.HOR.INST. W=800MM
- Manufacturer order code: 1STQ001473B0000
- Product type: Circuit breaker installation kit
- Product category: Low-voltage switchgear installation accessories
- Circuit breaker family: XT3
- Pole configuration: 3-pole or 4-pole
- Breaker installation type: Fixed
- Residual current device reference: RCD
- Installation orientation: Horizontal
- Specified assembly width: 800 mm
- Equipment compatibility: Manufacturer-specified ABB XT3 fixed circuit breaker and RCD arrangements
- Application: Low-voltage electrical distribution panel assembly and equipment installation
- Manufacturer identification: ABB PHDX3423 / 1STQ001473B0000
Horizontal XT3 Circuit Breaker Installation in 800 mm System Pro E Power Assemblies
The ABB System Pro E Power range is used in professional low-voltage electrical distribution assemblies, where correctly selected installation accessories help integrate protective and switching equipment into the intended panel configuration. Installation kits are selected according to the associated circuit breaker family, mounting arrangement, pole configuration and enclosure dimensions.
The ABB PHDX3423 is specifically identified for an XT3 fixed circuit breaker arrangement with an RCD configuration reference. The product designation specifies compatibility references for 3-pole and 4-pole installations, allowing the correct arrangement to be selected according to the applicable ABB assembly documentation.
The designation HOR.INST. identifies a horizontal installation configuration. This is an important selection characteristic because the position and orientation of electrical protective devices must correspond to the intended switchboard design, mounting components and associated electrical connections.
The specified 800 mm width is another key consideration. The ABB PHDX3423 is identified for an assembly width of 800 mm, rather than as a universally compatible XT3 mounting accessory. Panel builders should verify the exact System Pro E Power enclosure or functional compartment configuration before selecting the kit.
The RCD reference indicates an installation arrangement involving a residual current device. Residual current protection is used in electrical systems to detect specified residual current conditions and initiate disconnection through the appropriate protective equipment. However, the ABB PHDX3423 is an installation kit, not a complete circuit breaker or standalone residual current protective device.
The supplied manufacturer designation does not establish the kit's individual components, mounting hardware quantities, compatible RCD models, rated current, rated voltage or overall assembled dimensions. These details must be confirmed from the applicable ABB technical documentation and installation instructions.
When installing the ABB PHDX3423 XT3 Kit, qualified personnel should verify the circuit breaker version, pole arrangement, RCD configuration, horizontal mounting requirements and the intended 800 mm assembly width. The completed switchboard must comply with the applicable electrical design, equipment manufacturer requirements and relevant safety standards.
Typical Applications
- Compatible ABB System Pro E Power electrical distribution assemblies.
- Horizontal installation of compatible ABB XT3 fixed circuit breakers.
- 3-pole XT3 circuit breaker mounting arrangements.
- 4-pole XT3 circuit breaker mounting arrangements.
- XT3 circuit breaker installations incorporating compatible RCD arrangements.
- Low-voltage electrical switchboards with the specified 800 mm assembly width.
- Industrial electrical power distribution panels.
- Commercial building electrical distribution assemblies.
- Professional switchboard construction and equipment integration.
- Refurbishment or replacement of corresponding ABB XT3 installation kit components.
Frequently Asked Questions
What is the ABB PHDX3423 XT3 Installation Kit used for?
The ABB PHDX3423 is an installation kit for compatible ABB XT3 fixed circuit breakers with an RCD configuration reference. It is specified for 3-pole or 4-pole horizontal installations in compatible System Pro E Power electrical distribution assemblies with an 800 mm width.
Is the ABB PHDX3423 suitable for both 3-pole and 4-pole XT3 circuit breakers?
Yes. The manufacturer designation specifies 3-4P, identifying the kit for compatible 3-pole and 4-pole XT3 arrangements. The exact circuit breaker model, RCD configuration and associated installation requirements must be verified using ABB technical documentation.
What does FIXED+RCD.HOR.INST. mean in the ABB PHDX3423 designation?
FIXED identifies the fixed circuit breaker installation arrangement, RCD refers to a residual current device configuration, and HOR.INST. identifies horizontal installation. Together, these terms describe the intended installation configuration for the ABB PHDX3423 kit.
Does the ABB PHDX3423 include an XT3 circuit breaker and RCD?
The product is designated as an XT3 installation kit. The supplied specification does not confirm that a circuit breaker or residual current device is included. The exact contents of the kit should be checked against the ABB bill of materials or product documentation before ordering.
What is the ABB order code for the PHDX3423 XT3 Kit?
The manufacturer order code is 1STQ001473B0000. This identifies the ABB PHDX3423 XT3 KIT 3-4P FIXED+RCD.HOR.INST. W=800MM within the ABB System Pro E Power product group.
Trusted ABB System Pro E Power Installation Accessories
ABB System Pro E Power accessories provide switchboard manufacturers, electrical contractors and panel builders with manufacturer-identified components for compatible low-voltage distribution assemblies. The ABB PHDX3423 XT3 Installation Kit, order code 1STQ001473B0000, offers a dedicated horizontal installation arrangement for compatible 3-pole and 4-pole fixed XT3 circuit breakers with RCD configurations in 800 mm-wide electrical assemblies.
