1STQ001472B0000 ABB PHDX1423 System pro E Power XT1 3-4 Pole Fixed + RCD Horizontal Installation Kit 800 mm

1STQ001472B0000 ABB PHDX1423 System pro E Power XT1 3-4 Pole Fixed + RCD Horizontal Installation Kit 800 mm

ABB PHDX1423 System pro E power horizontal installation kit, order code 1STQ001472B0000, designed for compatible 3-pole and 4-pole fixed XT1 circuit breakers with RCD in 800 mm-wide low-voltage switchboard enclosures.

SKU: 1STQ001472B0000Alt SKU: PHDX1423MPN: 1STQ001472B0000
Price
List Price £157.90 ex VAT
Your Price (ex VAT)
£157.90
Manufacturer Lead Time Estimated Delivery 6 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £157.90
Trade pricing is personalised to your account

Manufacturer Lead Time

£157.90

Why Choose the ABB PHDX1423 XT1 Horizontal Installation Kit?

The ABB PHDX1423 is a dedicated XT1 installation kit for 3-pole and 4-pole fixed circuit breakers with RCD, designed for horizontal installation within compatible ABB System pro E power low-voltage switchboard assemblies. Specified for a 800 mm nominal enclosure width, this accessory supports the mechanical integration of compatible ABB XT1 circuit-breaker and residual-current protection arrangements.

Correct installation of circuit protection equipment is essential for organised and reliable switchboard construction. The PHDX1423 provides a manufacturer-designated mounting arrangement for fixed ABB XT1 circuit breakers in 3-pole or 4-pole configurations with residual-current protection, helping electrical panel builders incorporate compatible protective devices into modular distribution cabinets.

Identified by ABB order code 1STQ001472B0000 and the manufacturer designation XT1 KIT 3-4P FIXED+RCD.HOR.INST. W=800MM, the PHDX1423 is intended for professional switchgear manufacturers, electrical panel builders and maintenance engineers working with compatible ABB System pro E power assemblies.

Key Advantages

  • Genuine ABB System pro E power installation accessory for compatible low-voltage switchboards.
  • Designed for compatible ABB XT1 moulded-case circuit breakers.
  • Supports both 3-pole and 4-pole circuit-breaker configurations.
  • Specified for fixed-mounted XT1 circuit breakers.
  • Accommodates the designated RCD residual-current protection arrangement.
  • Horizontal installation orientation for the specified switchboard layout.
  • 800 mm nominal enclosure width for the intended installation configuration.
  • Supports organised mechanical integration of circuit-breaker and residual-current protection equipment.
  • Helps simplify the selection of manufacturer-designated switchboard mounting accessories.
  • Suitable for new switchboard construction and compatible installation refurbishment.
  • Clearly identified by ABB order code 1STQ001472B0000.

Key Features

  • ABB System pro E power modular switchboard accessory.
  • PHDX1423 manufacturer model designation.
  • XT1 circuit-breaker installation kit configuration.
  • Compatible circuit-breaker family: ABB XT1.
  • Supported pole configurations: 3-pole and 4-pole.
  • Circuit-breaker mounting type: Fixed.
  • Residual-current protection arrangement: RCD.
  • Installation orientation: Horizontal.
  • Nominal enclosure width: 800 mm.
  • Designed for compatible low-voltage electrical distribution switchboards.
  • Supports mechanical mounting of the specified XT1 and RCD arrangement.
  • Manufacturer order code: 1STQ001472B0000.

Horizontal Installation for ABB XT1 Fixed Circuit Breakers with RCD

The ABB XT1 moulded-case circuit-breaker family is used in low-voltage electrical distribution systems where circuit protection equipment must be incorporated into correctly designed switchboard assemblies. Depending on the selected breaker and associated accessories, XT1 installations may include residual-current protection as part of the overall protective arrangement.

The ABB PHDX1423 is specifically designated for 3-pole and 4-pole fixed XT1 circuit breakers with RCD. Its horizontal installation configuration identifies the intended mounting orientation, while the 800 mm nominal enclosure width establishes the corresponding System pro E power cabinet arrangement.

The distinction between fixed, plug-in and withdrawable circuit-breaker configurations is important when selecting installation accessories. The PHDX1423 is specified for a fixed circuit-breaker arrangement and should not be assumed suitable for plug-in or withdrawable XT1 installations without manufacturer confirmation.

The RCD designation identifies the intended residual-current protection arrangement. However, the installation kit does not independently establish the RCD's rated residual operating current, time-delay characteristics or protection settings. These specifications depend on the selected ABB XT1 circuit breaker and compatible residual-current protection equipment.

As a mechanical installation accessory, the PHDX1423 should be selected alongside the appropriate XT1 breaker, RCD arrangement and any separately required mounting or connection components. The exact kit contents and supported protective-device variants should be confirmed against the relevant ABB assembly instructions.

Integration with ABB System pro E Power Switchboards

The ABB System pro E power range supports modular low-voltage switchboard construction through a coordinated selection of enclosure structures, protective-device mounting arrangements and installation accessories. Correct component selection helps panel builders configure assemblies that correspond to the intended electrical and mechanical design.

For the PHDX1423, the principal selection requirements are the ABB XT1 circuit-breaker family, 3-pole or 4-pole configuration, fixed mounting arrangement, RCD compatibility, horizontal installation orientation and 800 mm nominal enclosure width.

Using the correctly specified installation kit supports consistent equipment positioning within the switchboard. The completed assembly must also account for electrical clearances, conductor connections, thermal management and any additional requirements associated with the chosen protective devices.

Installation should follow the applicable ABB instructions, including mounting positions, fastening requirements and compatibility with associated switchboard components. The PHDX1423 does not independently determine the circuit breaker's rated current, short-circuit breaking capacity or residual-current protection characteristics.

Typical Applications

  • ABB System pro E power low-voltage switchboards.
  • Horizontal installation of compatible ABB XT1 circuit breakers with RCD.
  • Fixed 3-pole XT1 circuit-breaker and residual-current protection arrangements.
  • Fixed 4-pole XT1 circuit-breaker and residual-current protection arrangements.
  • Industrial electrical power distribution cabinets.
  • Commercial building electrical distribution assemblies.
  • Main and subsidiary low-voltage distribution boards.
  • Electrical switchgear manufacturing and professional panel building.
  • Modular switchboard protective-device mounting and integration.
  • Maintenance and refurbishment of compatible XT1 and RCD installation arrangements.

Technical Specifications

Product range System pro E power
ABB order code 1STQ001472B0000
Manufacturer designation XT1 KIT 3-4P FIXED+RCD.HOR.INST. W=800MM
Product type Circuit-breaker installation kit
Product category Electrical Switchgear Mounting and Installation Accessories
Compatible circuit-breaker family ABB XT1
Supported number of poles 3 or 4
Circuit-breaker mounting configuration Fixed
Residual-current protection arrangement RCD
Installation orientation Horizontal
Nominal enclosure width 800 mm
Installation application Compatible fixed XT1 circuit-breaker and RCD arrangements
Equipment type Low-voltage electrical distribution switchboards
Compatible enclosure system ABB System pro E power
Accessory classification Mechanical circuit-breaker installation accessory

Frequently Asked Questions

What is the ABB PHDX1423 used for?

The ABB PHDX1423 is an installation kit designed for horizontal mounting of compatible 3-pole or 4-pole fixed ABB XT1 circuit breakers with RCD within System pro E power switchboards with a nominal enclosure width of 800 mm.

Which circuit-breaker configurations does the PHDX1423 support?

The PHDX1423 is designated for ABB XT1 fixed circuit breakers in 3-pole and 4-pole configurations with residual-current protection. Compatibility with an individual XT1 breaker and RCD arrangement should be confirmed using the applicable ABB installation documentation.

Is the ABB PHDX1423 intended for horizontal or vertical installation?

The PHDX1423 is specified for horizontal installation, as indicated by the manufacturer's HOR.INST. designation.

What enclosure width is specified for the ABB PHDX1423?

The PHDX1423 is specified for a nominal enclosure width of 800 mm within a compatible ABB System pro E power switchboard arrangement.

Can the ABB PHDX1423 be used with withdrawable XT1 circuit breakers?

The PHDX1423 is designated for fixed XT1 circuit-breaker installations. It should not be assumed compatible with plug-in or withdrawable configurations unless ABB confirms the relevant arrangement.

Does the ABB PHDX1423 include an XT1 circuit breaker and RCD?

The PHDX1423 is identified as an installation kit for an XT1 fixed circuit-breaker and RCD arrangement. The manufacturer designation does not confirm that the circuit breaker or RCD is included, so the exact package contents should be verified before ordering.

What is the ABB order code for the PHDX1423?

The ABB manufacturer order code is 1STQ001472B0000, corresponding to model PHDX1423 in the System pro E power range.

Trusted ABB System pro E Power Installation Accessories

ABB System pro E power installation accessories support professional low-voltage switchboard construction and the organised integration of electrical protection equipment. The ABB PHDX1423 provides a manufacturer-specified horizontal installation kit for compatible 3-pole and 4-pole fixed XT1 circuit-breaker and RCD arrangements within 800 mm-wide switchboard configurations.