Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVBT5319 System pro E power installation accessory, order code 1STQ001470B0000, for a T5 630 A 3-pole withdrawable circuit breaker in a vertical, terminal-front, non-segregated arrangement with a nominal enclosure width of 400 mm.
£194.70
The ABB PVBT5319 is a dedicated System pro E power installation accessory for an ABB T5 630 A, 3-pole withdrawable circuit breaker. Designed for a vertical arrangement in a switchboard with a nominal width of 400 mm, this component is specified for a terminal-front configuration without segregation, as identified by the manufacturer's designation T5 630A 3P WITHD.VER.W400 T.FRON.NO SEG.
Withdrawable circuit-breaker installations require correctly matched mechanical components to accommodate the selected breaker arrangement within a low-voltage electrical distribution assembly. The PVBT5319 supports the integration of compatible ABB T5 equipment into the modular ABB System pro E power switchboard system, providing a manufacturer-designated solution for the specified installation layout.
Identified by ABB order code 1STQ001470B0000, the PVBT5319 is intended for professional electrical panel builders, switchgear manufacturers and maintenance engineers working with compatible T5 withdrawable circuit-breaker configurations.
The ABB T5 moulded-case circuit-breaker family is used in low-voltage electrical distribution applications where protective switching equipment must be integrated into a correctly designed switchboard. Depending on the selected breaker and installation accessories, T5 devices can be incorporated into different mounting arrangements.
The ABB PVBT5319 is specifically designated for a 630 A, 3-pole T5 withdrawable configuration. Its vertical installation arrangement identifies the intended orientation of the compatible equipment within the switchboard, while the 400 mm nominal width defines the corresponding enclosure configuration.
Withdrawable circuit-breaker arrangements differ from fixed installations because the breaker is designed to work with a compatible withdrawable mounting system. The PVBT5319 should therefore be selected for the specified withdrawable configuration rather than assumed suitable for fixed or plug-in T5 devices.
The manufacturer's T.FRON. designation identifies the terminal-front arrangement associated with this accessory. Correct equipment orientation and connection arrangements should be verified against the applicable ABB System pro E power installation documentation.
The NO SEG. designation specifies an installation arrangement without segregation. This is an important consideration when designing the internal layout of a low-voltage switchboard, particularly where separation between functional units or other internal components is required by the project specification.
The ABB System pro E power range provides a modular approach to low-voltage switchboard construction through coordinated enclosure structures, equipment mounting arrangements and installation accessories. Correctly specified components help panel builders create assemblies that correspond to the intended electrical and mechanical design.
For the PVBT5319, the principal selection requirements are the ABB T5 breaker family, 630 A rating, 3-pole configuration, withdrawable mounting, vertical orientation, 400 mm nominal enclosure width, terminal-front arrangement and no-segregation configuration.
The PVBT5319 is an installation accessory rather than a complete circuit breaker. Its designation does not independently establish the contents of the supplied assembly, the breaker's short-circuit breaking capacity, trip-unit characteristics or the overall electrical rating of the completed switchboard.
Installation should follow the applicable ABB assembly instructions, including the correct withdrawable equipment arrangement, associated connection components, electrical clearances and any project-specific requirements for internal separation.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001470B0000 |
| Manufacturer designation | T5 630A 3P WITHD.VER.W400 T.FRON.NO SEG. |
| Product type | Withdrawable circuit-breaker installation accessory |
| Product category | Electrical Switchgear Mounting and Installation Accessories |
| Compatible circuit-breaker family | ABB T5 |
| Specified circuit-breaker rating | 630 A |
| Number of poles | 3 |
| Circuit-breaker configuration | Withdrawable |
| Installation orientation | Vertical |
| Nominal enclosure width | 400 mm |
| Terminal configuration | Front |
| Segregation arrangement | No segregation |
| Installation application | Compatible ABB T5 withdrawable circuit-breaker assemblies |
| Equipment type | Low-voltage electrical distribution switchboards |
| Compatible enclosure system | ABB System pro E power |
| Accessory classification | Mechanical switchboard installation accessory |
The ABB PVBT5319 is a System pro E power installation accessory specified for a 630 A, 3-pole ABB T5 withdrawable circuit breaker in a vertical, terminal-front arrangement without segregation, within a compatible 400 mm-wide switchboard configuration.
The PVBT5319 is designated for an ABB T5 circuit breaker rated at 630 A in a 3-pole withdrawable configuration. Compatibility with a specific T5 variant should be confirmed using the relevant ABB assembly documentation.
The PVBT5319 is specified for vertical installation, as indicated by the manufacturer's VER. designation.
The designation identifies a terminal-front arrangement without segregation. The complete switchboard configuration should be checked against the applicable ABB assembly instructions and project requirements.
The PVBT5319 is specified for a nominal switchboard enclosure width of 400 mm, indicated by W400 in the manufacturer's designation.
The PVBT5319 is identified as a System pro E power installation accessory for a T5 withdrawable arrangement. The manufacturer designation does not confirm that the circuit breaker is included, so the exact supplied contents should be verified before ordering.
The ABB manufacturer order code is 1STQ001470B0000, corresponding to model PVBT5319 in the System pro E power range.
ABB System pro E power installation accessories support professional low-voltage switchboard construction and the integration of protective switching equipment. The ABB PVBT5319 provides a manufacturer-specified solution for compatible T5 630 A, 3-pole withdrawable circuit-breaker arrangements requiring vertical installation, a 400 mm nominal enclosure width, terminal-front configuration and no segregation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.