1STQ001467B0000 ABB PHCT5307 System Pro E Power T5 630A 3P Plug-In Horizontal Installation Kit W600

1STQ001467B0000 ABB PHCT5307 System Pro E Power T5 630A 3P Plug-In Horizontal Installation Kit W600

ABB PHCT5307 (1STQ001467B0000) System Pro E Power horizontal installation kit for one Tmax T5 630 A three-pole plug-in circuit-breaker, designed for a 600 mm-wide switchboard section with front terminals and a non-segregated mounting arrangement.

SKU: 1STQ001467B0000Alt SKU: PHCT5307MPN: 1STQ001467B0000
Price
List Price £197.05 ex VAT
Your Price (ex VAT)
£197.05
Manufacturer Lead Time Estimated Delivery 6 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £197.05
Trade pricing is personalised to your account

Manufacturer Lead Time

£197.05

Why Choose the ABB PHCT5307 T5 630A Plug-In Installation Kit for System Pro E Power?

The ABB PHCT5307 (1STQ001467B0000) is a horizontal circuit-breaker installation kit designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as T5 630A 3P PL.IN.HOR.W600 T.FRON.NO SEG., this accessory provides a dedicated mounting arrangement for a compatible ABB Tmax T5 630 A three-pole plug-in circuit-breaker.

As part of the ABB System Pro E Power series, the PHCT5307 supports modular electrical distribution assemblies using coordinated internal installation components. It is specified for a 600 mm-wide switchboard section and a horizontal circuit-breaker arrangement, helping electrical panel builders select a mounting solution suited to the required breaker version and enclosure configuration.

The manufacturer designation also specifies front terminals and a non-segregated installation arrangement. ABB's System Pro E Power selection information identifies a 200 mm installation compartment height for this kit. These characteristics make the PHCT5307 a specific mounting accessory rather than a universal circuit-breaker installation solution.

Key Advantages

  • Genuine ABB System Pro E Power internal installation kit for low-voltage switchboards.
  • Designed for a compatible ABB Tmax T5 630 A circuit-breaker.
  • Three-pole (3P) configuration for the specified protective device.
  • Plug-in circuit-breaker arrangement for compatible Tmax T5 equipment.
  • Horizontal installation orientation for modular switchboard construction.
  • Designed for 600 mm-wide switchboard sections.
  • Front-terminal, non-segregated configuration for the designated installation arrangement.
  • Supports a 200 mm-high installation compartment.
  • Provides a dedicated mounting position for one compatible circuit-breaker assembly.
  • Supports coordinated switchboard construction using ABB mounting and enclosure accessories.

Key Features

  • ABB System Pro E Power product family.
  • PHCT5307 manufacturer product designation.
  • 1STQ001467B0000 ABB manufacturer ordering code.
  • T5 630A 3P PL.IN.HOR.W600 T.FRON.NO SEG. manufacturer description.
  • ABB Tmax T5 circuit-breaker compatibility.
  • 630 A compatible circuit-breaker designation.
  • Three-pole (3P) breaker arrangement.
  • Plug-in circuit-breaker mounting version.
  • Horizontal installation orientation.
  • 600 mm nominal switchboard section width.
  • 200 mm installation compartment height.
  • Front-terminal connection configuration.
  • Non-segregated switchboard installation arrangement.
  • One circuit-breaker position per compartment.
  • Designed for integration into compatible ABB System Pro E Power switchboard structures.

Dedicated Horizontal Mounting for ABB Tmax T5 Plug-In Circuit-Breakers

Internal installation kits are important components of modular low-voltage switchboards. They provide the mounting arrangement required to position compatible protective devices within an electrical enclosure. Correct kit selection depends on the circuit-breaker family, rated frame designation, number of poles, mounting version and connection arrangement.

The ABB PHCT5307 is specifically designated for a Tmax T5 630 A three-pole plug-in circuit-breaker installed horizontally in a 600 mm-wide System Pro E Power section. ABB's installation selection tables identify a 200 mm compartment height and one circuit-breaker position for this configuration.

The plug-in version is a significant compatibility requirement. Plug-in circuit-breakers use a dedicated connection and mounting arrangement that differs from fixed and withdrawable versions. The PHCT5307 should therefore not be assumed interchangeable with installation kits intended for other Tmax T5 configurations.

The front-terminal specification identifies the designated breaker connection arrangement, while the non-segregated configuration indicates that the kit is intended for a switchboard layout without internal compartment separation at the relevant mounting position. These requirements must be considered when selecting the complete enclosure and associated components.

ABB's System Pro E Power horizontal installation system uses dedicated mounting components and internal panel arrangements. The exact fixing accessories, support structures and installation sequence must be confirmed against the applicable ABB assembly instructions for the selected configuration.

The 630 A designation identifies the compatible Tmax T5 breaker size; it does not independently establish an electrical current rating for the mounting kit. The short-circuit performance, permissible loading, electrical clearances and ingress protection of the completed switchboard depend on the selected equipment and verified assembly design.

Typical Applications

  • ABB System Pro E Power low-voltage switchboard assemblies.
  • Horizontal mounting of compatible ABB Tmax T5 630 A circuit-breakers.
  • Three-pole plug-in circuit-breaker installations.
  • Industrial electrical power distribution cabinets.
  • Commercial building electrical distribution switchboards.
  • Compatible 600 mm-wide modular switchboard sections.
  • Internal installation compartments with a nominal height of 200 mm.
  • Front-terminal, non-segregated switchboard arrangements.
  • Professional electrical panel manufacturing and switchboard integration.
  • Maintenance and replacement of compatible ABB internal installation accessories.

Technical Specifications

Series System Pro E Power
ABB order code 1STQ001467B0000
Manufacturer description T5 630A 3P PL.IN.HOR.W600 T.FRON.NO SEG.
Product type Horizontal circuit-breaker installation kit
Product family Low-voltage switchboard internal installation accessories
Compatible circuit-breaker family ABB Tmax T5
Compatible breaker designation 630 A
Number of poles 3P
Circuit-breaker version Plug-in
Installation orientation Horizontal
Nominal switchboard section width 600 mm
Installation compartment height 200 mm
Number of circuit-breaker positions 1
Terminal arrangement Front terminals
Segregation arrangement Non-segregated
System compatibility ABB System Pro E Power
Application Internal mounting of a compatible Tmax T5 630 A three-pole plug-in circuit-breaker
Installation type Horizontal mounting within a compatible low-voltage switchboard section

Frequently Asked Questions

What is the ABB PHCT5307 1STQ001467B0000 used for?

The ABB PHCT5307 is a horizontal installation kit designed for mounting one compatible ABB Tmax T5 630 A three-pole plug-in circuit-breaker in an ABB System Pro E Power low-voltage switchboard.

What switchboard dimensions are required for the ABB PHCT5307?

The PHCT5307 is specified for a 600 mm-wide switchboard section and a 200 mm-high installation compartment. The complete enclosure and internal mounting arrangement should be checked against the applicable ABB documentation.

Is the ABB PHCT5307 compatible with fixed or withdrawable Tmax T5 circuit-breakers?

The PHCT5307 is specifically designated for a three-pole plug-in Tmax T5 630 A circuit-breaker. Fixed and withdrawable versions may require different installation kits and should not be assumed compatible.

What does front-terminal, non-segregated mean for the ABB PHCT5307?

Front-terminal identifies the specified circuit-breaker connection arrangement. Non-segregated means the kit is intended for an installation without internal compartment separation at the relevant mounting position. The complete arrangement must follow ABB's switchboard assembly instructions.

Does the ABB PHCT5307 include the Tmax T5 circuit-breaker?

The PHCT5307 is an internal installation kit, not a complete circuit-breaker assembly. The compatible Tmax T5 breaker and any required plug-in connection components must be selected according to the relevant ABB technical documentation.

Trusted ABB Components for Professional Switchboard Assembly

ABB System Pro E Power provides coordinated internal installation accessories for electrical panel builders, contractors and industrial power distribution specialists. The ABB PHCT5307 (1STQ001467B0000) offers a dedicated horizontal mounting arrangement for one compatible Tmax T5 630 A three-pole plug-in circuit-breaker in a 600 mm-wide, front-terminal, non-segregated switchboard configuration.