Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHCX1323 System pro E power horizontal installation kit, order code 1STQ001443B0000, designed for a compatible 3-pole fixed XT1 circuit-breaker and RCD arrangement in a 600 mm-wide low-voltage switchboard enclosure.
£107.56
The ABB PHCX1323 is a dedicated XT1 installation kit for a 3-pole fixed circuit breaker with RCD, designed for horizontal installation within compatible ABB System pro E power low-voltage switchboard assemblies. Specified for a 600 mm nominal enclosure width, this accessory supports the mechanical integration of compatible ABB XT1 circuit-breaker and residual-current protection arrangements.
Correct circuit-breaker installation is essential for the organisation, accessibility and mechanical integrity of electrical distribution assemblies. The PHCX1323 provides a manufacturer-designated installation solution for a 3-pole fixed XT1 configuration with residual-current protection, helping panel builders select the appropriate mounting arrangement for the intended switchboard design.
Identified by ABB order code 1STQ001443B0000 and the manufacturer designation XT1 KIT 3P FIXED+RCD. HOR.INST. W=600MM, the PHCX1323 is intended for professional electrical panel builders, switchgear manufacturers and maintenance engineers working with compatible ABB System pro E power assemblies.
The ABB XT1 circuit-breaker family is used in low-voltage electrical distribution applications where circuit protection must be integrated into a correctly designed switchboard. Depending on the selected device and associated accessories, an installation may incorporate residual-current protection alongside the circuit breaker's other protective functions.
The ABB PHCX1323 is specifically designated for a 3-pole fixed XT1 arrangement with RCD. Its horizontal installation format identifies the intended orientation of the compatible equipment within the switchboard assembly, while the 600 mm width establishes the nominal enclosure configuration.
The distinction between fixed and withdrawable circuit-breaker installations is important when selecting mounting accessories. The PHCX1323 is specified for a fixed installation and should not be assumed suitable for plug-in or withdrawable configurations without explicit manufacturer confirmation.
Similarly, the RCD designation identifies the intended residual-current protection arrangement but does not establish a particular residual-current sensitivity, operating characteristic or electrical rating. These parameters depend on the selected ABB XT1 circuit breaker and compatible residual-current protection device.
The PHCX1323 is an installation kit rather than a complete protective circuit breaker or RCD. The exact contents of the kit, compatible device variants and any additional mounting or connection components should be checked against the applicable ABB System pro E power assembly documentation before installation.
The ABB System pro E power range provides a modular approach to low-voltage switchboard construction, combining enclosure structures, equipment mounting arrangements and installation accessories to support a variety of electrical distribution configurations.
Using the correctly specified installation kit helps ensure that the intended circuit-breaker arrangement is incorporated into the appropriate cabinet layout. For the PHCX1323, the principal selection requirements are the ABB XT1 device family, 3-pole fixed configuration, RCD arrangement, horizontal orientation and 600 mm nominal enclosure width.
Final equipment selection and assembly should account for the applicable ABB mounting instructions, electrical clearances, protective-device specifications, enclosure arrangement and relevant switchboard design requirements. The installation kit does not independently determine the current rating, breaking capacity or residual-current operating characteristics of the installed protective equipment.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001443B0000 |
| Manufacturer designation | XT1 KIT 3P FIXED+RCD. HOR.INST. W=600MM |
| Product type | Circuit-breaker installation kit |
| Product category | Electrical Switchgear Mounting and Installation Accessories |
| Compatible circuit-breaker family | ABB XT1 |
| Number of poles | 3 |
| Circuit-breaker mounting type | Fixed |
| Residual-current protection arrangement | RCD |
| Installation orientation | Horizontal |
| Nominal enclosure width | 600 mm |
| Installation application | Compatible fixed XT1 circuit-breaker and RCD arrangements |
| Equipment type | Low-voltage electrical distribution switchboards |
| Compatible enclosure system | ABB System pro E power |
| Accessory classification | Mechanical circuit-breaker installation accessory |
The ABB PHCX1323 is an installation kit designed for a compatible 3-pole fixed ABB XT1 circuit breaker with RCD, arranged for horizontal installation in a System pro E power switchboard with a nominal enclosure width of 600 mm.
The PHCX1323 is designated for an ABB XT1, 3-pole, fixed circuit-breaker configuration with RCD. Compatibility with a specific breaker and residual-current protection device should be confirmed using the applicable ABB assembly documentation.
The PHCX1323 is specified for horizontal installation, as indicated by the manufacturer's HOR.INST. designation.
The PHCX1323 is specified for a nominal enclosure width of 600 mm within a compatible ABB System pro E power switchboard arrangement.
The PHCX1323 is identified as an installation kit for an XT1 fixed circuit-breaker and RCD arrangement. The manufacturer designation does not confirm that the circuit breaker or RCD is supplied with the kit, so the exact package contents should be verified before ordering.
The ABB manufacturer order code is 1STQ001443B0000, corresponding to model PHCX1323 in the System pro E power range.
ABB System pro E power installation accessories support professional low-voltage switchboard construction and the organised integration of electrical protection equipment. The ABB PHCX1323 provides a manufacturer-specified horizontal installation kit for compatible 3-pole fixed XT1 circuit-breaker and RCD arrangements within 600 mm-wide switchboard configurations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.