Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001382B0000 ABB PPNL4080 Blind Panel 400 x 800 mm – System Pro E Power
ABB PPNL4080 (1STQ001382B0000) is a blind enclosure panel with a specified height of 400 mm and width of 800 mm for compatible ABB System Pro E Power electrical switchboard assemblies.
£83.28
Why Choose the ABB PPNL4080 Blind Panel 400 × 800 mm?
The ABB PPNL4080, manufacturer order code 1STQ001382B0000, is a blind panel from the ABB System Pro E Power range, specified with a height of 400 mm and a width of 800 mm. This electrical enclosure accessory is intended for compatible industrial switchboard and low-voltage power distribution assemblies requiring a closed panel covering.
Blind panels are important components in electrical switchboard construction, providing a solid covering for designated enclosure sections. Unlike ventilated or instrument cut-out panels, a blind panel is designed without intentional ventilation or equipment openings. The ABB PPNL4080 supports the completion of compatible electrical distribution assemblies by providing a manufacturer-specified covering for the corresponding panel position.
With its 400 × 800 mm height and width specification, the ABB PPNL4080 is suitable for compatible System Pro E Power cabinet arrangements requiring this particular panel configuration. Its unique ABB order code 1STQ001382B0000 supports accurate identification, procurement and replacement during switchboard construction, equipment maintenance and enclosure refurbishment.
Key Advantages
- Blind panel configuration for covering designated electrical enclosure sections.
- 400 mm specified height for the corresponding switchboard arrangement.
- 800 mm specified width for compatible electrical distribution cabinets.
- Solid covering design without intentional ventilation or instrument openings.
- Part of the ABB System Pro E Power range of low-voltage electrical distribution equipment.
- Supports orderly and consistent electrical switchboard construction.
- Suitable for compatible enclosure assembly, maintenance and refurbishment projects.
- ABB order code 1STQ001382B0000 enables accurate product identification and procurement.
Key Features
- ABB PPNL4080 product reference.
- System Pro E Power product range.
- 1STQ001382B0000 manufacturer order code.
- Blind enclosure panel designation.
- 400 mm specified height.
- 800 mm specified width.
- Closed panel configuration for compatible switchboard arrangements.
- Designed for industrial electrical distribution enclosure applications.
- Manufacturer-identified accessory for compatible ABB System Pro E Power assemblies.
Blind Enclosure Panels for Industrial Power Distribution Switchboards
Industrial electrical switchboards accommodate circuit breakers, switching devices, busbar systems, protective equipment and associated electrical connections. Their enclosure structures incorporate panels, covers and other mechanical accessories selected according to cabinet dimensions, equipment layouts and installation requirements. Blind panels are used where a designated section of the assembly requires a closed covering rather than an instrument opening or ventilated panel.
The ABB PPNL4080 blind panel belongs to the System Pro E Power range and is specified with a 400 mm height and 800 mm width. It provides a manufacturer-designated component for compatible switchboard configurations requiring a solid panel covering. The precise mounting position, fixing arrangement and compatible enclosure combinations should be confirmed against the relevant ABB technical documentation.
Correct panel selection contributes to the mechanical completeness and intended configuration of an electrical distribution enclosure. However, the protection characteristics of the completed switchboard depend on the complete assembly, including its frame, doors, panels, seals and installation methods. The supplied manufacturer designation does not state an individual IP rating for the PPNL4080, so the applicable enclosure protection requirements should be verified before installation.
Typical Applications
- ABB System Pro E Power electrical switchboard assemblies.
- Industrial low-voltage power distribution cabinets.
- Compatible electrical enclosures requiring 400 × 800 mm blind panels.
- Switchboard sections requiring a solid panel covering.
- Electrical distribution panel construction and configuration.
- Replacement of matching enclosure panels during equipment maintenance.
- Switchgear refurbishment and cabinet assembly projects requiring ABB PPNL4080.
Technical Specifications
| Product range | System Pro E Power |
|---|---|
| Product reference | PPNL4080 |
| ABB order code | 1STQ001382B0000 |
| Product type | Blind enclosure panel |
| Manufacturer designation | BLIND PANEL H=400MM W=800MM |
| Specified height | 400 mm |
| Specified width | 800 mm |
| Panel configuration | Blind |
| Component category | Electrical switchboard enclosure accessory |
| Function | Covering compatible electrical enclosure sections |
| Application | Low-voltage electrical distribution switchboards |
| Equipment compatibility | ABB System Pro E Power assemblies specified for PPNL4080 |
Frequently Asked Questions
What is the ABB PPNL4080 used for?
The ABB PPNL4080 is a blind enclosure panel intended for compatible ABB System Pro E Power electrical switchboards. It provides a closed covering for designated sections of an electrical distribution enclosure.
What are the specified dimensions of the ABB PPNL4080?
The manufacturer designation specifies a height of 400 mm and a width of 800 mm. Exact external dimensions, mounting-hole positions and installation tolerances should be confirmed against ABB technical documentation where required.
What is the difference between a blind panel and a ventilated panel?
A blind panel provides a solid covering without designated ventilation openings, whereas a ventilated panel incorporates openings intended to accommodate airflow. The ABB PPNL4080 is specified as a blind panel for compatible enclosure arrangements requiring a closed covering.
Does the ABB PPNL4080 have a specified IP protection rating?
The supplied manufacturer designation identifies the ABB PPNL4080 as a blind panel but does not state an individual IP protection rating. The protection level of the completed switchboard depends on the compatible enclosure system, mounting arrangements and any required sealing components.
What is the ABB order code for the PPNL4080 blind panel?
The manufacturer's order code is 1STQ001382B0000. This identifies the ABB PPNL4080 blind panel with a specified height of 400 mm and width of 800 mm within the System Pro E Power range.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB System Pro E Power enclosure accessories support the construction, configuration and maintenance of industrial electrical distribution switchboards. The ABB PPNL4080 blind panel provides a manufacturer-identified component for compatible cabinet assemblies requiring a closed panel covering with a specified height of 400 mm and width of 800 mm.
