1STQ001381B0000 ABB PPNL4060 Blind Panel H400 W600 System Pro E Power

Why Choose the ABB PPNL4060 Blind Panel H400 W600?

The ABB PPNL4060 (1STQ001381B0000) is a blind enclosure panel for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Identified by the manufacturer's description BLIND PANEL H=400MM W=600MM, this component has a specified height of 400 mm and width of 600 mm.

Blind panels are important accessories in modular electrical switchboard construction. They provide a physical covering for designated enclosure openings or equipment areas, helping complete the intended panel arrangement. The blind configuration identifies a covering without purpose-designed ventilation or equipment access openings, making it relevant to switchboard layouts requiring a closed panel section.

The ABB PPNL4060 is intended for compatible assemblies specifying a 400 mm height and 600 mm width blind panel. Correct dimensional selection is important when constructing or maintaining modular switchboards, as panels with different height or width designations may not correspond to the same mounting arrangement.

With manufacturer reference PPNL4060 and ABB order code 1STQ001381B0000, this System Pro E Power accessory provides clear product identification for new electrical switchboard construction, planned maintenance, refurbishment and replacement part procurement.

Key Advantages

• Dedicated blind panel for compatible ABB System Pro E Power assemblies.
• 400 mm height designation for the specified enclosure arrangement.
• 600 mm width designation for compatible switchboard configurations.
• Provides a covering for designated enclosure or equipment openings.
• Blind construction avoids purpose-designed ventilation and equipment access apertures.
• Supports the intended panel arrangement within a compatible electrical distribution assembly.
• Helps maintain an organised and consistent switchboard covering layout.
• ABB manufacturer reference PPNL4060 simplifies accurate identification and procurement.
• Suitable for compatible original equipment construction, maintenance and refurbishment projects.
• Provides a matching replacement option where the original ABB assembly specifies this panel.

Key Features

• ABB System Pro E Power product group.
• Manufacturer reference: PPNL4060.
• ABB order code: 1STQ001381B0000.
• Manufacturer description: BLIND PANEL H=400MM W=600MM.
• Blind panel configuration.
• Height designation: 400 mm.
• Width designation: 600 mm.
• Intended for compatible low-voltage electrical distribution assemblies.
• Supports the specified enclosure panel covering arrangement.
• Suitable for matching replacement and original equipment assembly applications.

Blind Panel Design for ABB System Pro E Power Switchboards

The ABB System Pro E Power range supports modular low-voltage electrical distribution assemblies. These switchboards use different panels and accessories to complete their specified equipment layouts. Blind panels are used where a designated area requires a covering rather than an opening for ventilation, equipment access or installed electrical devices.

The ABB PPNL4060 is specifically identified as a blind panel. In electrical enclosure terminology, this generally means a panel without intentional apertures for installed devices or ventilation. This distinguishes it from aerated panels, perforated coverings and panels manufactured with dedicated equipment cut-outs.

The manufacturer's H=400MM W=600MM description identifies a height designation of 400 mm and a width designation of 600 mm. These measurements are essential when selecting a panel for a particular switchboard arrangement. However, they should not be interpreted as confirmation of every physical dimension, fixing position or installation clearance without reference to the relevant ABB technical drawings.

A blind panel can contribute to the physical covering and organisation of equipment within an electrical enclosure. Nevertheless, its presence alone does not establish a particular form of internal separation under IEC 61439. Any specified separation classification depends on the complete switchboard design, including the arrangement of barriers, compartments, equipment and associated components.

Similarly, the supplied manufacturer description does not identify an IP protection rating for the PPNL4060. A blind panel should not automatically be described as IP40, IP54 or IP65 simply because it provides a closed covering. The ingress protection rating of the finished enclosure depends on its complete construction and the correct installation of all relevant panels, doors, seals and cable-entry components.

For maintenance and refurbishment projects, matching the correct manufacturer reference is particularly important. A blind panel with a different height or width designation may not fit the intended mounting arrangement. Selecting ABB PPNL4060 (1STQ001381B0000) where specified helps preserve the original enclosure configuration.

Typical Applications

• Compatible ABB System Pro E Power low-voltage switchboards.
• Modular electrical distribution enclosure construction.
• Switchboard layouts requiring a 400 mm high blind panel.
• Enclosure arrangements with a 600 mm width designation.
• Covering designated unused or enclosed equipment areas.
• Industrial electrical distribution and control assemblies.
• Manufacturing and process automation switchboard installations.
• OEM electrical panel and switchboard manufacturing projects.
• Maintenance of compatible ABB System Pro E Power equipment.
• Refurbishment and replacement of matching blind enclosure panels.