1STQ001380B0000 ABB PPNL3010 Blind Panel H300 W1000 System Pro E Power

Why Choose the ABB PPNL3010 Blind Panel H300 W1000?

The ABB PPNL3010 (1STQ001380B0000) is a blind enclosure panel for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Identified by the manufacturer's description BLIND PANEL H=300MM W=1000MM, this component has a specified height of 300 mm and width of 1000 mm.

Blind panels are important accessories in modular electrical switchboard construction. They provide a physical covering for designated enclosure openings or equipment areas, helping complete the intended panel arrangement. The blind configuration identifies a covering without purpose-designed ventilation or equipment access openings, making it relevant to switchboard layouts requiring an enclosed section.

The ABB PPNL3010 is particularly useful where the specified assembly requires a blind panel with a 300 mm height and 1000 mm width designation. Selecting the correct dimensions helps ensure that the panel corresponds to the intended enclosure layout and mounting arrangement.

With manufacturer reference PPNL3010 and ABB order code 1STQ001380B0000, this System Pro E Power accessory offers clear product identification for new switchboard construction, electrical enclosure maintenance, refurbishment and replacement part procurement.

Key Advantages

• Dedicated blind panel for compatible ABB System Pro E Power assemblies.
• 300 mm height designation for the specified enclosure arrangement.
• 1000 mm width designation for compatible switchboard configurations.
• Provides a covering for designated enclosure or equipment openings.
• Blind construction avoids purpose-designed ventilation or equipment access apertures.
• Supports the intended external or internal panel arrangement, as specified by ABB.
• Helps maintain an organised and consistent switchboard covering layout.
• ABB manufacturer reference PPNL3010 simplifies accurate identification and procurement.
• Suitable for compatible original equipment construction, maintenance and refurbishment.
• Provides a matching replacement option where the original ABB assembly specifies this panel.

Key Features

• ABB System Pro E Power product group.
• Manufacturer reference: PPNL3010.
• ABB order code: 1STQ001380B0000.
• Manufacturer description: BLIND PANEL H=300MM W=1000MM.
• Blind panel configuration.
• Height designation: 300 mm.
• Width designation: 1000 mm.
• Intended for compatible low-voltage electrical distribution assemblies.
• Supports the specified enclosure panel covering arrangement.
• Suitable for matching replacement and original equipment assembly applications.

Blind Panel Design for ABB System Pro E Power Switchboards

The ABB System Pro E Power range supports modular low-voltage electrical distribution assemblies. These switchboards use different enclosure panels and accessories to complete their specified equipment layouts. Blind panels are commonly used where a designated area requires a covering rather than an opening for ventilation, equipment access or cable entry.

The ABB PPNL3010 is specifically identified as a blind panel. In electrical enclosure terminology, this generally means a panel without intentional apertures for installed devices or ventilation. It is therefore distinct from aerated panels, perforated coverings and panels designed with dedicated equipment cut-outs.

The manufacturer's H=300MM W=1000MM description identifies a height designation of 300 mm and a width designation of 1000 mm. These measurements are important when selecting a panel for a particular switchboard arrangement. However, the designation should not be taken as confirmation of every physical dimension, fixing position or mounting clearance without reference to ABB's technical drawings.

A blind panel can contribute to the physical separation and covering of electrical equipment within an enclosure. Nevertheless, its presence alone does not establish a particular form of internal separation under IEC 61439. Any specified separation classification depends on the complete switchboard design, including the arrangement of barriers, compartments, equipment and associated components.

Similarly, the supplied description does not specify an IP protection rating for the PPNL3010. A blind panel should not automatically be described as IP40, IP54 or IP65 simply because it provides a closed covering. The ingress protection rating of the finished enclosure depends on its complete construction and the correct installation of all relevant panels, seals, doors and cable-entry components.

For refurbishment or replacement projects, matching the correct ABB manufacturer reference is particularly important. Blind panels with different height or width designations may not fit the same mounting arrangement. Using ABB PPNL3010 (1STQ001380B0000) where specified helps preserve the intended enclosure configuration.

Typical Applications

• Compatible ABB System Pro E Power low-voltage switchboards.
• Modular electrical distribution enclosure construction.
• Switchboard layouts requiring a 300 mm high blind panel.
• Enclosure arrangements with a 1000 mm width designation.
• Covering designated unused or enclosed equipment areas.
• Industrial electrical distribution and control assemblies.
• Manufacturing and process automation switchboard installations.
• OEM electrical panel and switchboard manufacturing projects.
• Maintenance of compatible ABB System Pro E Power equipment.
• Refurbishment and replacement of matching blind enclosure panels.