Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001378B0000 ABB PPNL3060 Blind Panel 300 × 600 mm
ABB PPNL3060 Blind Panel (1STQ001378B0000) is a non-ventilated enclosure covering panel measuring 300 mm high and 600 mm wide for compatible ABB System pro E power low-voltage switchgear assemblies.
£49.51
Why Choose the ABB PPNL3060 Blind Panel H300 W600?
The ABB PPNL3060 Blind Panel, manufacturer order code 1STQ001378B0000, is a dedicated enclosure covering accessory from the ABB System pro E power range. Designed for compatible modular low-voltage switchgear assemblies, this blind panel has a nominal height of 300 mm and width of 600 mm, providing a covering solution for designated enclosure or equipment compartments.
Blind panels are important components in electrical switchboard construction, particularly where unused openings, reserved equipment spaces or designated enclosure sections require a closed covering arrangement. The ABB PPNL3060 provides a non-ventilated panel configuration that can help maintain the intended mechanical separation and protective covering of compatible System pro E power assemblies.
As part of ABB's modular System pro E power enclosure system, the PPNL3060 supports organised switchboard construction, equipment compartment management and maintenance accessibility. Its specified 300 × 600 mm height-and-width configuration helps panel builders identify the appropriate component for the corresponding enclosure arrangement.
The dedicated manufacturer reference 1STQ001378B0000 also supports accurate product identification, purchasing and replacement, making this blind panel relevant to electrical contractors, switchgear manufacturers, industrial maintenance teams and low-voltage distribution panel builders.
Key Advantages
- Dedicated blind covering: Provides a closed panel arrangement for compatible ABB System pro E power switchboard sections.
- 300 mm nominal height: Supports accurate selection for the corresponding enclosure opening or compartment arrangement.
- 600 mm nominal width: Identified for compatible modular switchboard configurations.
- Non-ventilated construction: Provides a blind covering option without intentional ventilation openings.
- Equipment compartment covering: Can be used where the specified switchboard design requires a covered section.
- Modular system integration: Belongs to ABB's System pro E power low-voltage electrical distribution enclosure range.
- Mechanical protection support: Contributes to the intended physical covering of enclosed electrical equipment.
- Consistent switchboard appearance: Helps provide an orderly arrangement of covered sections within compatible assemblies.
- Replacement suitability: Dedicated model identification supports the selection of matching enclosure components.
- Accurate procurement: ABB order code 1STQ001378B0000 simplifies purchasing, inventory control and maintenance planning.
Key Features
- Manufacturer: ABB.
- Product model: PPNL3060.
- Product range: System pro E power.
- Manufacturer order code: 1STQ001378B0000.
- Product designation: Blind Panel H=300MM W=600MM.
- Component type: Blind enclosure panel.
- Nominal panel height: 300 mm.
- Nominal panel width: 600 mm.
- Panel configuration: Blind / non-ventilated.
- Primary function: Covering designated enclosure openings or sections.
- Equipment application: Compatible modular low-voltage switchgear assemblies.
- Supports the intended mechanical covering arrangement of ABB electrical enclosures.
- Suitable for original equipment construction and correctly specified replacement applications.
- Dedicated ABB product reference for component selection and maintenance records.
Reliable Blind Panel Covering for System pro E Power Switchboards
Industrial low-voltage switchgear assemblies require carefully selected enclosure components to maintain their intended mechanical construction and provide appropriate covering for internal electrical equipment. Blind panels are commonly incorporated into modular switchboard designs where a designated section must remain closed rather than accommodating an operating device, instrument or ventilation opening.
The ABB PPNL3060 Blind Panel is specifically identified for compatible System pro E power applications requiring a nominal panel height of 300 mm and width of 600 mm. These dimensions support accurate selection for the corresponding enclosure arrangement and help distinguish the PPNL3060 from alternative panel sizes within a modular switchboard installation.
Its blind construction provides a covering arrangement without intentional ventilation openings. This is useful where the enclosure design specifies a closed panel rather than a perforated, aerated or equipment-specific front covering. The panel should nevertheless be selected as part of the complete switchboard design, taking account of accessibility, equipment arrangement and thermal management requirements.
The PPNL3060 is a mechanical enclosure accessory rather than an electrical protective device. It does not independently provide overload protection, short-circuit protection, switching or isolation. Its contribution to personnel protection and environmental protection depends on the complete enclosure configuration and the manner in which it is installed.
The supplied product designation does not specify an individual ingress protection rating, material, finish, thickness, fixing arrangement or package contents. These characteristics should not be assumed. The final ingress protection and mechanical performance of the completed switchboard depend on all installed panels, doors, joints, cable entries and associated enclosure components.
For reliable installation, the ABB PPNL3060 should be fitted according to the applicable System pro E power assembly instructions. Correct component selection and mounting help maintain the intended covering arrangement and support consistent construction, servicing and refurbishment of compatible low-voltage electrical distribution assemblies.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Compatible switchboard sections requiring a 300 × 600 mm blind panel.
- Industrial electrical distribution switchboards.
- Modular low-voltage power distribution cabinets.
- Covering designated unused enclosure openings.
- Electrical equipment compartment covering arrangements.
- Industrial control and power distribution enclosures.
- Electrical panel manufacturing and switchboard integration.
- Replacement of matching ABB PPNL3060 blind panels.
- Switchgear enclosure refurbishment and maintenance projects.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001378B0000 |
| Product name | Blind Panel H300 W600 |
| Manufacturer designation | BLIND PANEL H=300MM W=600MM |
| Product type | Blind enclosure covering panel |
| Nominal height | 300 mm |
| Nominal width | 600 mm |
| Nominal panel dimensions | 300 × 600 mm (H × W) |
| Panel configuration | Blind |
| Ventilation configuration | Non-ventilated |
| Equipment category | Low-voltage switchgear enclosure accessory |
| Primary function | Mechanical covering of a designated switchboard section |
| Application | Compatible ABB System pro E power low-voltage switchgear assemblies |
Frequently Asked Questions
What is the ABB PPNL3060 Blind Panel used for?
The ABB PPNL3060 is a blind enclosure covering panel for compatible ABB System pro E power switchgear assemblies. It provides a closed covering arrangement for a designated switchboard opening or section.
What is the ABB order code for the PPNL3060?
The manufacturer order code is 1STQ001378B0000, corresponding to the ABB PPNL3060 Blind Panel H300 W600.
What are the dimensions of the ABB PPNL3060?
The ABB PPNL3060 has a designated nominal height of 300 mm and width of 600 mm. These dimensions should be matched to the corresponding ABB System pro E power enclosure configuration.
What does blind panel mean?
A blind panel is a covering component without intentional equipment cut-outs or ventilation openings. It is used where a compatible enclosure section requires a closed covering arrangement rather than an open, ventilated or device-specific panel.
Is the ABB PPNL3060 compatible with System pro E power switchboards?
Yes. The PPNL3060 belongs to the ABB System pro E power range. Compatibility with a particular enclosure frame, compartment arrangement and mounting configuration should be confirmed using the applicable ABB assembly documentation.
Can the ABB PPNL3060 be used to cover an unused switchboard opening?
Yes, where the opening is designed to accept the PPNL3060 blind panel. Its nominal dimensions are 300 × 600 mm, but the required mounting arrangement and compatibility must be verified for the specific switchboard configuration.
Does the ABB PPNL3060 provide an IP protection rating?
The supplied product specification does not state an individual IP rating for the PPNL3060. The ingress protection rating of the completed switchboard depends on the complete enclosure assembly, including the installed panel, doors, joints, seals and other relevant components.
Is the ABB PPNL3060 a ventilated panel?
No. The PPNL3060 is designated as a blind panel, meaning it provides a covering arrangement without intentional ventilation openings. It should not be substituted for a ventilated panel where airflow is required by the enclosure design.
Are mounting screws or fixing accessories included with the ABB PPNL3060?
The supplied product designation does not confirm whether mounting screws, brackets or other fixing accessories are included. The exact package contents and installation requirements should be confirmed from the relevant ABB product documentation.
Can ABB 1STQ001378B0000 be used as a replacement blind panel?
Yes, it may be selected as a replacement where the original equipment specifies ABB PPNL3060 or order code 1STQ001378B0000. The replacement should match the enclosure dimensions, mounting arrangement and required covering configuration.
Trusted by Industrial Switchgear and Electrical Panel Building Professionals
ABB System pro E power enclosure accessories provide configuration-specific components for the construction and maintenance of modular low-voltage electrical distribution assemblies. The ABB PPNL3060 Blind Panel offers a dedicated 300 × 600 mm covering solution for compatible switchboard sections, supporting accurate component selection, consistent enclosure assembly and effective maintenance planning.
