Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PLSU0300 (1STQ001333B0000) is a lateral segregation component for Unifix H with a 300 mm height designation, intended for compatible ABB System Pro E Power low-voltage electrical distribution assemblies.
£54.33
The ABB PLSU0300 (1STQ001333B0000) is a lateral segregation component for Unifix H, designed for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Identified by the manufacturer's description SEGR.LAT.UNIFIX H H=300MM, this accessory has a specified height designation of 300 mm and is intended for use in suitable Unifix H equipment arrangements.
Internal segregation components play an important role in the construction of electrical switchboards. They help establish the intended physical separation between designated areas of an assembly, supporting an organised internal layout and the installation of equipment according to the manufacturer's design. The ABB PLSU0300 provides a manufacturer-identified component for applications requiring lateral segregation within a compatible Unifix H configuration.
With manufacturer reference PLSU0300 and ABB order code 1STQ001333B0000, this System Pro E Power accessory can be accurately identified for new switchboard construction, equipment refurbishment, planned maintenance and replacement part procurement. Its suitability depends on the relevant ABB assembly documentation, mounting arrangement and internal segregation requirements.
The ABB System Pro E Power range supports modular low-voltage electrical distribution assemblies. Within these installations, internal segregation components may be used to establish physical boundaries between designated equipment areas. The required arrangement depends on the switchboard design, the installed electrical devices and the separation requirements specified for the complete assembly.
The ABB PLSU0300 is identified as a lateral segregation accessory for Unifix H. The manufacturer's abbreviation SEGR.LAT. indicates lateral segregation, while UNIFIX H identifies the associated equipment system. The H=300MM designation specifies a height of 300 mm for the intended configuration.
Internal segregation can contribute to the physical organisation of electrical equipment and help maintain designated separation boundaries within a switchboard. However, a single segregation component does not independently establish a particular form of internal separation, such as Form 2, Form 3 or Form 4 under IEC 61439. Any required separation classification must be assessed against the complete assembly design and the applicable manufacturer's documentation.
The supplied product description does not specify the PLSU0300's material, thickness, fixing arrangement, insulation characteristics or detailed mounting geometry. These properties should not be assumed from the product name alone. Correct selection requires confirmation that the component is specified for the relevant Unifix H configuration and that all associated mounting and segregation components are present.
For maintenance and refurbishment projects, matching the original ABB manufacturer reference is particularly important. Segregation components with similar appearances or height designations may have different mounting requirements or intended applications. Using ABB PLSU0300 (1STQ001333B0000) where specified helps preserve the original equipment arrangement.
| Manufacturer reference | PLSU0300 |
|---|---|
| ABB order code | 1STQ001333B0000 |
| Product group | System Pro E Power |
| Manufacturer description | SEGR.LAT.UNIFIX H H=300MM |
| Product type | Lateral segregation component |
| Associated system | Unifix H |
| Height designation (H) | 300 mm |
| Segregation orientation | Lateral |
| Installation category | Internal electrical switchboard accessory |
| Primary function | Physical separation within a specified equipment arrangement |
| Component category | Low-voltage electrical distribution enclosure accessories |
| Compatible product family | ABB System Pro E Power, subject to assembly configuration |
| Application | Internal segregation in compatible Unifix H switchboard arrangements |
| Mounting requirements | As specified by the applicable ABB assembly instructions |
The ABB PLSU0300 is a lateral segregation component for Unifix H, intended for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. It supports the specified physical separation arrangement within equipment configurations requiring this accessory.
SEGR.LAT.UNIFIX H H=300MM is ABB's abbreviated product description. It identifies a lateral segregation component associated with the Unifix H system and specifies a height designation of 300 mm. Exact physical dimensions and mounting details should be confirmed against ABB technical documentation.
Not necessarily. Although the ABB PLSU0300 belongs to the System Pro E Power product group, its compatibility depends on the Unifix H configuration, mounting arrangement and required internal segregation layout. Selection should be verified using manufacturer reference PLSU0300, ABB order code 1STQ001333B0000 and the applicable assembly documentation.
The supplied manufacturer description identifies the PLSU0300 as a lateral segregation component but does not establish a specific form of internal separation. A classification such as Form 4 depends on the complete switchboard design and the relevant requirements of IEC 61439. The PLSU0300 alone does not certify an assembly's separation classification.
The supplied product specification confirms the 300 mm height designation but does not identify the component's material, thickness, fixing positions or included mounting hardware. These details should be confirmed using the relevant ABB System Pro E Power and Unifix H technical documentation before installation.
ABB PLSU0300 (1STQ001333B0000) is a manufacturer-identified lateral segregation component for Unifix H with a 300 mm height designation, intended for compatible ABB System Pro E Power low-voltage electrical distribution assemblies requiring the specified internal separation arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.