Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001314B0000 ABB PBWP7590 Bottom Kit Without Plinth 750 × 900 mm
ABB PBWP7590 Bottom Kit Without Plinth (1STQ001314B0000) is a bottom enclosure assembly accessory for compatible System pro E power low-voltage switchboards with a nominal width of 750 mm and depth of 900 mm.
£203.33
Why Choose the ABB PBWP7590 Bottom Kit Without Plinth?
The ABB PBWP7590 Bottom Kit Without Plinth, manufacturer order code 1STQ001314B0000, is a dedicated bottom enclosure assembly kit from the ABB System pro E power range. Designed for compatible modular low-voltage switchgear assemblies, this accessory is specified for an enclosure configuration with a nominal width of 750 mm and depth of 900 mm.
The lower section of an electrical switchboard is an important part of its overall mechanical construction. Bottom assembly components help establish the intended enclosure arrangement and provide the specified interface between the cabinet structure and its installation environment. The ABB PBWP7590 is specifically designated as a bottom kit without plinth, making it suitable for compatible System pro E power configurations where a separate raised plinth is not included in the bottom kit.
Its 750 × 900 mm width-and-depth designation supports accurate component selection for the corresponding ABB enclosure configuration. The dedicated manufacturer reference 1STQ001314B0000 also helps electrical panel builders, switchgear manufacturers and maintenance engineers identify the correct accessory for new installations, replacement requirements and refurbishment projects.
Key Advantages
- Dedicated bottom enclosure kit: Provides a specified assembly solution for the lower section of compatible ABB System pro E power switchboards.
- Without-plinth configuration: Intended for bottom enclosure arrangements where a plinth is not included as part of the kit.
- 750 mm nominal width: Supports selection for the corresponding switchboard enclosure width.
- 900 mm nominal depth: Identified for compatible deep enclosure configurations.
- Modular system integration: Belongs to ABB's System pro E power low-voltage switchgear enclosure family.
- Mechanical assembly support: Contributes to the intended construction of the lower enclosure section.
- Configuration-specific design: Helps distinguish the required bottom arrangement from alternative enclosure base and plinth configurations.
- Switchboard construction flexibility: Supports appropriately specified modular enclosure installations.
- Replacement identification: Dedicated PBWP7590 model reference simplifies matching-component selection.
- Accurate procurement: ABB order code 1STQ001314B0000 supports purchasing, inventory management and maintenance planning.
Key Features
- Manufacturer: ABB.
- Product model: PBWP7590.
- Product family: System pro E power.
- Manufacturer order code: 1STQ001314B0000.
- Product designation: KIT BOT.WITH-OUT PLINTH W=750MM D=900MM.
- Component type: Bottom enclosure assembly kit.
- Configuration: Without plinth.
- Nominal enclosure width: 750 mm.
- Nominal enclosure depth: 900 mm.
- Installation location: Bottom enclosure section.
- Equipment application: Compatible modular low-voltage electrical switchboards.
- Supports the specified mechanical arrangement of the enclosure base section.
- Designed for integration with compatible ABB System pro E power components.
- Suitable for original switchboard construction and correctly specified replacement applications.
- Dedicated manufacturer identification for component selection and maintenance records.
Reliable Bottom Enclosure Assembly for System pro E Power Switchboards
Industrial low-voltage switchboards require correctly selected enclosure components to maintain their intended mechanical construction and support the arrangement of internal electrical equipment. The bottom section of a switchboard forms part of this overall structure and must be assembled according to the manufacturer's specified configuration.
The ABB PBWP7590 Bottom Kit Without Plinth is identified for compatible System pro E power enclosures with a nominal width of 750 mm and depth of 900 mm. The width-and-depth designation helps panel builders select the appropriate bottom kit for the corresponding enclosure arrangement. These values describe the specified cabinet configuration and should not automatically be interpreted as the exact manufactured dimensions of every individual kit component.
The without-plinth designation distinguishes the PBWP7590 from enclosure arrangements that incorporate a separate raised base. A plinth may be used in certain switchboard installations to provide additional elevation or a dedicated supporting arrangement, but the PBWP7590 is specified as a bottom kit without plinth. Any separate base or supporting accessories required by the installation must be selected according to the applicable ABB system documentation.
As a mechanical enclosure accessory, the PBWP7590 does not independently provide circuit switching, overload protection or short-circuit protection. Its purpose is associated with the assembly of the enclosure's lower section. The complete switchboard design must account for cabinet support, cable routing, installation conditions and the positioning of other enclosure components.
The supplied product designation does not specify a standalone ingress protection rating, material, load-bearing capacity, fixing arrangement or detailed kit contents. These characteristics should not be assumed. The environmental protection and mechanical performance of the completed switchboard depend on the full enclosure assembly and its installation.
Correct installation of the ABB PBWP7590 should follow the relevant System pro E power assembly instructions. Matching the bottom kit to the intended enclosure dimensions and configuration helps maintain consistency during switchboard construction, servicing and replacement work.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Compatible electrical enclosures with a nominal width of 750 mm and depth of 900 mm.
- Industrial electrical distribution switchboards.
- Modular low-voltage power distribution cabinets.
- Switchboard bottom assembly arrangements without plinths.
- Deep electrical enclosure construction projects.
- Industrial control and power distribution equipment.
- Electrical panel manufacturing and switchboard integration.
- Replacement of matching ABB PBWP7590 bottom enclosure kits.
- Switchgear enclosure refurbishment and maintenance applications.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001314B0000 |
| Product name | Bottom Kit Without Plinth W750 D900 |
| Manufacturer designation | KIT BOT.WITH-OUT PLINTH W=750MM D=900MM |
| Product type | Bottom enclosure assembly kit |
| Nominal enclosure width | 750 mm |
| Nominal enclosure depth | 900 mm |
| Nominal enclosure configuration | 750 × 900 mm (W × D) |
| Plinth configuration | Without plinth |
| Installation position | Bottom of compatible enclosure |
| Equipment category | Low-voltage switchgear enclosure accessory |
| Primary function | Bottom enclosure assembly arrangement |
| Application | Compatible ABB System pro E power low-voltage switchgear assemblies |
Frequently Asked Questions
What is the ABB PBWP7590 Bottom Kit used for?
The ABB PBWP7590 is a bottom enclosure assembly kit for compatible ABB System pro E power low-voltage switchboards. It is designed for the specified lower enclosure arrangement without a plinth.
What is the ABB order code for the PBWP7590?
The manufacturer order code is 1STQ001314B0000, corresponding to the ABB PBWP7590 Bottom Kit Without Plinth.
What enclosure dimensions is the ABB PBWP7590 designed for?
The PBWP7590 is designated for an enclosure with a nominal width of 750 mm and depth of 900 mm. These dimensions should be matched to the corresponding ABB System pro E power enclosure configuration.
What does without plinth mean for the ABB PBWP7590?
Without plinth indicates that the kit is specified for a bottom enclosure arrangement without a plinth. It should not be assumed to include separate raised base sections or plinth accessories.
What is the difference between ABB PBWP7590 and ABB PBWP7520?
Both products are System pro E power bottom kits without plinth for enclosures with a nominal width of 750 mm. The PBWP7590, order code 1STQ001314B0000, is designated for a depth of 900 mm, while the PBWP7520, order code 1STQ001313B0000, is designated for a depth of 200 mm. They should be selected according to the required enclosure depth.
Is the ABB PBWP7590 compatible with System pro E power switchboards?
Yes. The PBWP7590 belongs to the ABB System pro E power range. Compatibility with a particular enclosure frame and bottom assembly arrangement should be confirmed using the applicable ABB assembly documentation.
Does the ABB PBWP7590 include a plinth?
No plinth is specified in the product designation. The PBWP7590 is explicitly identified as a bottom kit without plinth. Any separate plinth components required for the complete installation must be selected independently.
What components are included in the ABB PBWP7590 kit?
The supplied designation confirms that the product is a bottom enclosure kit without plinth, but it does not identify the individual components, quantities or fixing accessories included. The exact kit contents should be confirmed from the relevant ABB product documentation.
Does the ABB PBWP7590 have an IP protection rating?
The supplied product specification does not state an individual IP rating for the PBWP7590. The ingress protection rating of the completed switchboard depends on the full enclosure assembly, including its bottom arrangement, panels, cable entries, seals and other relevant components.
Can ABB 1STQ001314B0000 be used as a replacement bottom enclosure kit?
Yes, it may be selected as a replacement where the original equipment specifies ABB PBWP7590 or order code 1STQ001314B0000. The replacement must match the enclosure dimensions, mounting configuration and required bottom assembly arrangement.
Trusted by Industrial Switchgear and Electrical Panel Building Professionals
ABB System pro E power enclosure accessories provide configuration-specific components for the construction and maintenance of modular low-voltage electrical distribution assemblies. The ABB PBWP7590 Bottom Kit Without Plinth offers a dedicated bottom enclosure arrangement for compatible 750 × 900 mm switchboard configurations, supporting accurate component selection, consistent assembly and effective maintenance planning.
