Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001313B0000 ABB PBWP7520 Bottom Kit Without Plinth 750 × 200 mm
ABB PBWP7520 Bottom Kit Without Plinth (1STQ001313B0000) is a bottom enclosure assembly accessory for compatible System pro E power low-voltage switchboards with a nominal width of 750 mm and depth of 200 mm.
£120.95
Why Choose the ABB PBWP7520 Bottom Kit Without Plinth?
The ABB PBWP7520 Bottom Kit Without Plinth, manufacturer order code 1STQ001313B0000, is a dedicated bottom enclosure assembly kit from the ABB System pro E power range. Designed for compatible modular low-voltage switchgear assemblies, this accessory is identified for an enclosure with a nominal width of 750 mm and depth of 200 mm, providing a specified bottom arrangement where a plinth is not included.
Bottom enclosure components form an important part of industrial switchboard construction, helping establish the intended cabinet structure and providing the mechanical arrangement required at the lower section of an electrical enclosure. The ABB PBWP7520 is specifically designated as a bottom kit without plinth, making it relevant to System pro E power installations where the enclosure design calls for this particular configuration.
As part of ABB's modular System pro E power product family, the PBWP7520 supports the construction and maintenance of compatible electrical distribution switchboards. Its dedicated model reference and manufacturer order code enable accurate selection for original equipment assembly, correctly specified replacement installations and switchgear refurbishment projects.
Key Advantages
- Dedicated bottom assembly kit: Provides a specified component kit for the lower section of compatible ABB System pro E power enclosures.
- Without-plinth configuration: Identified for installations requiring a bottom kit without an integrated or supplied plinth.
- 750 mm nominal width: Supports accurate selection for the corresponding enclosure width.
- 200 mm nominal depth: Designed for the specified System pro E power enclosure depth configuration.
- Modular switchboard integration: Belongs to ABB's System pro E power low-voltage switchgear enclosure system.
- Mechanical assembly support: Contributes to the intended construction of the lower enclosure section.
- Configuration-specific selection: Helps distinguish non-plinth bottom arrangements from alternative enclosure base configurations.
- Original equipment compatibility: Suitable for appropriately specified ABB modular switchboard construction.
- Maintenance and refurbishment: Provides a dedicated manufacturer reference for replacing matching bottom assembly components.
- Accurate procurement: ABB order code 1STQ001313B0000 simplifies purchasing, inventory control and spare-part identification.
Key Features
- Manufacturer: ABB.
- Product model: PBWP7520.
- Product family: System pro E power.
- Manufacturer order code: 1STQ001313B0000.
- Product designation: KIT BOT.WITH-OUT PLINTH W=750MM D=200MM.
- Component type: Bottom enclosure assembly kit.
- Configuration: Without plinth.
- Nominal enclosure width: 750 mm.
- Nominal enclosure depth: 200 mm.
- Installation location: Lower enclosure section.
- Equipment application: Compatible modular low-voltage electrical switchboards.
- Supports the intended bottom assembly arrangement of the specified enclosure.
- Designed for integration with compatible ABB System pro E power components.
- Suitable for new switchboard construction and correctly specified replacement applications.
- Dedicated ABB identification for component selection and maintenance records.
Reliable Bottom Enclosure Assembly for System pro E Power Switchboards
Industrial low-voltage switchboards rely on correctly selected structural and enclosure accessories to maintain the intended cabinet configuration. The lower section of an electrical enclosure must be assembled in accordance with the manufacturer's system design, taking account of the cabinet dimensions, supporting structure, cable-entry arrangements and installation requirements.
The ABB PBWP7520 Bottom Kit Without Plinth is specifically identified for compatible System pro E power enclosures with a nominal width of 750 mm and depth of 200 mm. These dimensions identify the intended enclosure configuration rather than necessarily representing the exact external dimensions of every component included in the kit.
The without-plinth designation is particularly important during component selection. A plinth is generally a separate base structure used in certain enclosure installations to provide additional elevation or a defined base arrangement. The PBWP7520 is designated for a bottom assembly without a plinth and should not be assumed to include plinth sections or plinth mounting accessories.
As a mechanical enclosure accessory, the PBWP7520 does not independently provide electrical circuit protection, switching or overload protection. Its role is associated with the construction of the enclosure's bottom section. Any required cable-entry provisions, fixing components, floor-mounting arrangements or additional supports must be determined from the complete switchboard design and the applicable ABB assembly documentation.
The supplied product designation does not establish a standalone ingress protection rating, material specification, load-bearing capacity or detailed kit contents. These characteristics should not be inferred from the product name. The completed switchboard's mechanical integrity and environmental protection depend on the full assembly, including the enclosure frame, panels, doors, joints, cable entries and installation method.
For dependable installation, the PBWP7520 should be fitted in accordance with the relevant ABB System pro E power assembly instructions. Correct selection and installation help maintain the intended bottom enclosure arrangement and support consistent construction across compatible modular switchboard installations.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Compatible electrical enclosures with a nominal width of 750 mm and depth of 200 mm.
- Industrial electrical distribution switchboards.
- Modular low-voltage power distribution cabinets.
- Switchboard bottom assembly arrangements without plinths.
- Electrical enclosure construction and integration projects.
- Industrial power distribution equipment.
- Commercial and industrial electrical switchgear installations.
- Replacement of matching ABB PBWP7520 bottom assembly kits.
- Electrical panel manufacturing, maintenance and enclosure refurbishment.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001313B0000 |
| Product name | Bottom Kit Without Plinth W750 D200 |
| Manufacturer designation | KIT BOT.WITH-OUT PLINTH W=750MM D=200MM |
| Product type | Bottom enclosure assembly kit |
| Nominal enclosure width | 750 mm |
| Nominal enclosure depth | 200 mm |
| Nominal enclosure configuration | 750 × 200 mm (W × D) |
| Plinth configuration | Without plinth |
| Installation position | Bottom of compatible enclosure |
| Equipment category | Low-voltage switchgear enclosure accessory |
| Primary function | Bottom enclosure assembly arrangement |
| Application | Compatible ABB System pro E power low-voltage switchgear assemblies |
Frequently Asked Questions
What is the ABB PBWP7520 Bottom Kit used for?
The ABB PBWP7520 is a bottom enclosure assembly kit for compatible ABB System pro E power switchboards. It is designed for the specified lower enclosure arrangement without a plinth.
What is the ABB order code for the PBWP7520?
The manufacturer order code is 1STQ001313B0000, corresponding to the ABB PBWP7520 Bottom Kit Without Plinth.
What enclosure dimensions is the ABB PBWP7520 designed for?
The PBWP7520 is designated for an enclosure with a nominal width of 750 mm and depth of 200 mm. These dimensions should be matched to the corresponding ABB System pro E power enclosure configuration.
What does without plinth mean for the ABB PBWP7520?
Without plinth indicates that the kit is specified for a bottom enclosure arrangement without a plinth. It should not be assumed to include the separate raised base components associated with a plinth installation.
Is the ABB PBWP7520 compatible with System pro E power switchboards?
Yes. The PBWP7520 belongs to the ABB System pro E power product range. Compatibility with a particular enclosure frame and bottom assembly configuration should be confirmed using the applicable ABB assembly documentation.
Does the ABB PBWP7520 include a plinth?
No plinth is specified in the product designation. The PBWP7520 is explicitly identified as a bottom kit without plinth. Any separate plinth components required by the overall installation must be selected independently.
What components are included in the ABB PBWP7520 kit?
The supplied designation confirms that the product is a bottom enclosure kit without plinth, but it does not identify the individual components, quantities or fixing accessories included. The exact kit contents should be confirmed from the relevant ABB product documentation.
Does the ABB PBWP7520 have an IP protection rating?
The supplied product specification does not state an individual IP rating for the PBWP7520. The ingress protection rating of the completed switchboard depends on the full enclosure assembly, including its bottom arrangement, panels, cable entries, seals and other components.
Can the ABB PBWP7520 be used with a floor-mounted electrical cabinet?
The PBWP7520 is a bottom enclosure assembly accessory, but its suitability for a particular floor-mounted installation depends on the complete cabinet design, support arrangement and ABB installation requirements. The product designation alone does not establish a floor-mounting method or load capacity.
Can ABB 1STQ001313B0000 be used as a replacement bottom enclosure kit?
Yes, it may be selected as a replacement where the original equipment specifies ABB PBWP7520 or order code 1STQ001313B0000. The replacement must match the enclosure dimensions, mounting configuration and required bottom assembly arrangement.
Trusted by Industrial Switchgear and Electrical Panel Building Professionals
ABB System pro E power enclosure accessories provide configuration-specific components for the construction and maintenance of modular low-voltage electrical distribution assemblies. The ABB PBWP7520 Bottom Kit Without Plinth offers a dedicated bottom enclosure arrangement for compatible 750 × 200 mm switchboard configurations, supporting accurate component selection, consistent assembly and effective maintenance planning.
