Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001306B0000 ABB PTBO7590 IP65 Open Top/Bottom Panel 750 x 900 mm
ABB PTBO7590 (1STQ001306B0000) is an IP65-designated open top/bottom enclosure panel for compatible ABB System Pro E Power switchboards with a specified width of 750 mm and depth of 900 mm.
£184.13
Why Choose the ABB PTBO7590 IP65 Open Top/Bottom Panel?
The ABB PTBO7590, manufacturer order code 1STQ001306B0000, is an IP65 open top/bottom enclosure panel from the ABB System Pro E Power range, specified for an electrical cabinet configuration with a width of 750 mm and a depth of 900 mm. This enclosure accessory is intended for compatible industrial electrical switchboard and low-voltage power distribution assemblies.
The ABB PTBO7590 features an open panel configuration, distinguishing it from blind top/bottom panels that provide a closed covering arrangement. Open top and bottom panels are used where the electrical switchboard design requires a designated opening within the enclosure structure. The appropriate installation arrangement depends on the compatible components and assembly requirements specified by ABB.
With its IP65 designation and specified 750 × 900 mm width and depth configuration, the ABB PTBO7590 supports electrical panel construction, switchboard maintenance and enclosure refurbishment projects. Its unique ABB order code 1STQ001306B0000 enables accurate product identification, procurement and replacement when this particular System Pro E Power component is required.
Key Advantages
- IP65 protection designation for compatible electrical enclosure arrangements.
- Open top/bottom panel configuration for switchboard designs requiring a designated opening.
- 750 mm specified width for the corresponding enclosure configuration.
- 900 mm specified depth for compatible electrical cabinets.
- Part of the ABB System Pro E Power range of low-voltage electrical distribution equipment.
- Supports the configuration of electrical switchboard enclosures with designated top or bottom openings.
- Suitable for electrical panel construction, maintenance and refurbishment.
- ABB order code 1STQ001306B0000 enables accurate component identification and procurement.
Key Features
- ABB PTBO7590 product reference.
- System Pro E Power product range.
- 1STQ001306B0000 manufacturer order code.
- IP65 open top/bottom panel designation.
- 750 mm specified width.
- 900 mm specified depth.
- Open panel configuration for designated enclosure arrangements.
- Designed for compatible industrial electrical distribution switchboards.
- Intended for top or bottom enclosure positions where specified by ABB.
Open Top and Bottom Enclosure Panels for Industrial Power Distribution
Industrial electrical switchboards accommodate circuit breakers, switching devices, busbar systems, protective equipment and associated electrical connections. Their enclosure structures incorporate panels and accessories selected according to cabinet dimensions, equipment layout and installation requirements. Top and bottom panel configurations are important considerations when designing the physical arrangement of electrical distribution equipment.
The ABB PTBO7590 IP65 open top/bottom panel is intended for compatible System Pro E Power switchboard assemblies requiring the specified 750 mm width and 900 mm depth. Its open construction distinguishes it from blind enclosure panels and allows it to form part of a cabinet arrangement incorporating a designated opening. The exact opening geometry, mounting arrangement and intended use should be confirmed against the relevant ABB technical documentation.
The IP65 classification denotes dust-tight protection and protection against water jets under the applicable test conditions. However, an open panel does not independently provide a sealed enclosure. The completed switchboard can achieve its intended protection rating only when the opening is appropriately addressed through the specified enclosure design, compatible components and any necessary sealing arrangements. Correct installation and verification of the complete assembly are therefore essential.
Typical Applications
- ABB System Pro E Power electrical switchboard assemblies.
- Industrial low-voltage power distribution cabinets.
- Compatible electrical enclosures requiring open top or bottom panels.
- Switchboard configurations with a specified width of 750 mm and depth of 900 mm.
- Electrical distribution assemblies incorporating designated enclosure openings.
- Replacement of matching top or bottom panels during equipment maintenance.
- Switchgear refurbishment and cabinet assembly projects requiring ABB PTBO7590.
Technical Specifications
| Product range | System Pro E Power |
|---|---|
| Product reference | PTBO7590 |
| ABB order code | 1STQ001306B0000 |
| Product type | Open top/bottom enclosure panel |
| Manufacturer designation | IP65 OPEN TOP/BOTTOM W=750MM D=900MM |
| Protection designation | IP65 |
| Specified width | 750 mm |
| Specified depth | 900 mm |
| Panel configuration | Open |
| Installation position | Top/bottom enclosure arrangement |
| Component category | Electrical switchboard enclosure accessory |
| Application | Low-voltage electrical distribution switchboards |
| Equipment compatibility | ABB System Pro E Power assemblies specified for PTBO7590 |
Frequently Asked Questions
What is the ABB PTBO7590 used for?
The ABB PTBO7590 is an IP65 open top/bottom enclosure panel intended for compatible ABB System Pro E Power electrical switchboards. It is used where the enclosure design specifies an open panel arrangement at the top or bottom of the cabinet.
What are the specified dimensions of the ABB PTBO7590?
The manufacturer designation specifies a width of 750 mm and a depth of 900 mm. These identify the corresponding enclosure configuration; exact panel measurements, opening dimensions and mounting details should be confirmed against ABB technical documentation.
What does the IP65 designation mean for the ABB PTBO7590?
IP65 denotes dust-tight protection and protection against water jets under the applicable test conditions. Because the PTBO7590 is an open panel, the designation must be considered in the context of the complete enclosure assembly, including any additional components and sealing arrangements required to maintain the intended protection rating.
What is the difference between the ABB PTBO7590 open panel and a blind top/bottom panel?
The ABB PTBO7590 is specified as an open top/bottom panel, whereas a blind panel provides a closed covering arrangement without a designated opening. The appropriate configuration depends on the electrical switchboard design and the compatible enclosure components specified by ABB.
What is the ABB order code for the PTBO7590 IP65 open top/bottom panel?
The manufacturer's order code is 1STQ001306B0000. This identifies the ABB PTBO7590 IP65 open top/bottom panel for a 750 mm wide and 900 mm deep enclosure configuration within the System Pro E Power range.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB System Pro E Power enclosure components support the construction, configuration and maintenance of industrial electrical distribution switchboards. The ABB PTBO7590 IP65 open top/bottom panel provides a manufacturer-identified accessory for compatible cabinet assemblies requiring the specified 750 × 900 mm enclosure configuration and open panel arrangement.
