Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001300B0000 ABB PTBB7520 System pro E Power IP40 Blind Top/Bottom Panel 750 × 200 mm
ABB PTBB7520 System pro E power IP40 blind top/bottom enclosure panel, order code 1STQ001300B0000, designed for compatible low-voltage electrical switchboards with a nominal width of 750 mm and depth of 200 mm.
£118.79
Why Choose the ABB PTBB7520 IP40 Blind Top/Bottom Panel?
The ABB PTBB7520 is an IP40 blind top/bottom enclosure panel designed for compatible ABB System pro E power low-voltage electrical switchboards. Specified for an enclosure configuration measuring 750 mm in width and 200 mm in depth, this accessory provides a solid, non-ventilated covering for the designated top or bottom section of a compatible electrical distribution cabinet.
Blind top and bottom panels are essential components in modular switchboard construction, helping complete the enclosure structure and provide a protective barrier around internal electrical equipment. Unlike ventilated or aerated panels, the blind configuration does not incorporate intentional ventilation openings, making it suitable for enclosure arrangements where a closed panel surface is required.
Manufactured for the ABB System pro E power range, the PTBB7520 supports professional switchboard assembly, enclosure maintenance and component replacement. Its IP40 protection classification, 750 × 200 mm nominal dimensions and dedicated manufacturer identification, ABB order code 1STQ001300B0000, make it straightforward to specify for compatible electrical distribution installations.
Key Advantages
- Genuine ABB System pro E power enclosure accessory for compatible low-voltage switchboards.
- IP40 protection classification for the intended correctly assembled enclosure configuration.
- Blind panel construction provides a solid covering without intentional ventilation openings.
- 750 mm nominal width for compatible switchboard structures.
- 200 mm nominal depth for the specified enclosure arrangement.
- Top/bottom configuration supports installation in the designated upper or lower enclosure position.
- Helps protect internal switchboard components from accidental contact and solid foreign objects.
- Supports consistent modular cabinet construction and enclosure completion.
- Suitable for new switchboard assembly, maintenance and refurbishment.
- Identified by ABB order code 1STQ001300B0000 for accurate product selection.
Key Features
- ABB System pro E power modular switchboard accessory.
- PTBB7520 manufacturer model designation.
- IP40 blind top/bottom panel configuration.
- Nominal width: 750 mm.
- Nominal depth: 200 mm.
- Ingress protection classification: IP40.
- Solid, non-aerated panel format.
- Designed for compatible top or bottom enclosure positions.
- Supports enclosure covering and mechanical completion.
- Suitable for modular low-voltage electrical distribution assemblies.
- Manufacturer order code: 1STQ001300B0000.
Blind Top and Bottom Protection for ABB System pro E Power Switchboards
Electrical distribution switchboards require correctly specified enclosure components to provide mechanical protection, maintain appropriate separation from internal live equipment and support the intended ingress protection classification. Top and bottom panels form part of this protective structure by covering designated enclosure openings.
The ABB PTBB7520 blind top/bottom panel is intended for compatible switchboard configurations measuring 750 mm wide and 200 mm deep. Its blind construction provides a closed panel surface rather than an aerated design, making it appropriate where the switchboard specification calls for a non-ventilated top or bottom covering.
The IP40 classification indicates protection against solid foreign objects larger than 1 mm, with no rated protection against water ingress. Achieving the intended protection level depends on the complete switchboard assembly, including correct panel installation, associated enclosure components and any openings introduced during installation.
Where cable entry, ventilation or other services are required through the top or bottom of the enclosure, the relevant ABB-compatible accessories and approved installation arrangements should be selected. The blind panel designation should not be interpreted as providing preformed cable entry openings or ventilation facilities.
As part of the ABB System pro E power modular switchboard system, the PTBB7520 supports consistent enclosure construction and replacement of correctly specified components in low-voltage power distribution applications.
Typical Applications
- ABB System pro E power low-voltage switchboards.
- Industrial electrical power distribution cabinets.
- Commercial building electrical distribution assemblies.
- Blind top enclosure covering installations.
- Blind bottom enclosure covering installations.
- Main and subsidiary low-voltage distribution boards.
- Electrical switchgear and power distribution enclosures.
- Modular electrical cabinet manufacturing and assembly.
- Replacement of compatible damaged or missing enclosure panels.
- Switchboard maintenance, refurbishment and enclosure completion.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001300B0000 |
| Manufacturer designation | IP40 BLIND TOP/BOTTOM W=750MM D=200MM |
| Product type | Blind top/bottom enclosure panel |
| Product category | Electrical Switchgear Enclosure Accessories |
| Ingress protection classification | IP40 |
| Nominal enclosure width | 750 mm |
| Nominal enclosure depth | 200 mm |
| Nominal configuration (W × D) | 750 × 200 mm |
| Panel design | Blind / non-ventilated |
| Installation position | Top or bottom of a compatible enclosure |
| Component function | Enclosure covering and protection |
| Protection against solid foreign objects | Objects larger than 1 mm |
| Protection against water ingress | No protection specified by IP40 |
| Equipment type | Low-voltage electrical distribution switchboards |
| Compatible system | ABB System pro E power |
Frequently Asked Questions
What is the ABB PTBB7520 used for?
The ABB PTBB7520 is an IP40 blind top/bottom panel used to cover the designated upper or lower section of compatible ABB System pro E power electrical switchboard enclosures.
What are the dimensions of the ABB PTBB7520?
The PTBB7520 is specified for a nominal enclosure width of 750 mm and depth of 200 mm, corresponding to the manufacturer's W=750MM D=200MM designation.
What does IP40 mean for the ABB PTBB7520?
IP40 indicates protection against solid foreign objects larger than 1 mm but does not provide a rated level of water ingress protection. The complete switchboard must be assembled correctly to achieve its specified enclosure protection classification.
Is the ABB PTBB7520 a ventilated panel?
No. The PTBB7520 is designated as a blind top/bottom panel, meaning it is intended to provide a closed covering rather than an aerated or ventilated panel arrangement.
What is the ABB order code for the PTBB7520?
The ABB manufacturer order code is 1STQ001300B0000. The corresponding model is PTBB7520, part of the ABB System pro E power range.
Trusted ABB System pro E Power Enclosure Components
ABB System pro E power accessories support professional low-voltage switchboard construction, modular enclosure assembly and reliable electrical distribution installations. The ABB PTBB7520 IP40 blind top/bottom panel provides a dedicated enclosure covering solution for compatible 750 × 200 mm switchboard configurations requiring a manufacturer-specified, non-ventilated panel.
