Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001290B0000 ABB PFCF5020 Cable Entry Flange 500 × 200 mm
ABB PFCF5020 Cable Entry Flange (1STQ001290B0000) is an enclosure cable-entry accessory for compatible System pro E power low-voltage switchboards with a nominal width of 500 mm and depth of 200 mm.
£39.59
Why Choose the ABB PFCF5020 Cable Entry Flange?
The ABB PFCF5020 Cable Entry Flange, manufacturer order code 1STQ001290B0000, is a dedicated cable entry enclosure accessory from the ABB System pro E power range. Designed for compatible modular low-voltage switchgear assemblies, this component is identified for an enclosure configuration with a nominal width of 500 mm and depth of 200 mm.
Cable entry flanges are important elements in electrical switchboard construction, providing a designated interface for arranging incoming or outgoing cables at the enclosure boundary. The ABB PFCF5020 supports the integration of cable-entry arrangements into compatible System pro E power cabinets, helping panel builders maintain an organised installation and the intended mechanical enclosure configuration.
As part of ABB's System pro E power product family, the PFCF5020 is relevant to industrial power distribution switchboards and modular electrical enclosures where the corresponding cable entry flange is specified. Its dedicated ABB order code 1STQ001290B0000 enables accurate component identification, procurement and replacement during original equipment construction, servicing and refurbishment.
Key Advantages
- Dedicated cable entry interface: Provides a specified flange component for compatible ABB electrical enclosure arrangements.
- 500 mm nominal width: Identified for corresponding System pro E power enclosure configurations.
- 200 mm nominal depth: Supports selection for compatible switchboard cabinet dimensions.
- Organised cable routing: Helps establish the intended cable entry location within the enclosure design.
- Modular system integration: Belongs to ABB's System pro E power low-voltage switchgear range.
- Enclosure assembly support: Provides a dedicated component for constructing the specified cable-entry interface.
- Installation flexibility: Supports cable-entry arrangements designed for the compatible enclosure configuration.
- Maintenance convenience: Enables replacement of a matching flange during switchboard servicing or refurbishment.
- Accurate component identification: Model PFCF5020 distinguishes this accessory from other enclosure flange sizes.
- Reliable procurement reference: ABB order code 1STQ001290B0000 supports spare-part selection and inventory management.
Key Features
- Manufacturer: ABB.
- Product model: PFCF5020.
- Product range: System pro E power.
- Manufacturer order code: 1STQ001290B0000.
- Product designation: Cable Entry Flange W=500MM D=200MM.
- Component type: Cable entry flange.
- Nominal enclosure width: 500 mm.
- Nominal enclosure depth: 200 mm.
- Primary function: Provision of a designated cable-entry interface.
- Equipment application: Compatible modular low-voltage switchgear enclosures.
- Supports the intended mechanical arrangement of enclosure cable entries.
- Designed for integration into compatible ABB System pro E power assemblies.
- Suitable for original equipment construction and correctly specified replacement applications.
- Dedicated ABB manufacturer reference for purchasing and maintenance records.
Reliable Cable Entry Integration for System pro E Power Switchboards
Industrial electrical distribution assemblies require carefully planned cable-entry arrangements to accommodate incoming supplies, outgoing feeders and associated control wiring. Cable routing must be considered alongside enclosure dimensions, internal equipment positioning, cable support and the protection requirements of the completed switchboard.
The ABB PFCF5020 Cable Entry Flange provides a specifically identified enclosure component for compatible System pro E power installations. Its nominal 500 mm width and 200 mm depth designation supports accurate selection for the corresponding enclosure arrangement, helping ensure that the specified flange is used during assembly.
Cable entry flanges form part of the mechanical interface between an electrical enclosure and its cable installation. Depending on the complete equipment design, additional components may be required to provide cable retention, mechanical protection, sealing or the intended cable-entry arrangement. The PFCF5020 product designation does not establish whether cable glands, grommets, seals or fixing hardware are included.
The final ingress protection rating of an enclosure depends on the complete assembly, including the flange installation, cable penetrations, seals, doors, panels and other accessories. The supplied specification does not identify an individual IP rating for the PFCF5020, so a particular protection classification should not be assumed from the flange designation alone.
For reliable installation, the flange should be selected and fitted according to the applicable ABB System pro E power assembly instructions. Any cable-entry modifications must preserve the required mechanical integrity, cable protection and environmental suitability of the completed switchboard. Installation and maintenance should be undertaken by appropriately qualified personnel following relevant electrical safety procedures.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Compatible electrical enclosures with a nominal width of 500 mm and depth of 200 mm.
- Industrial electrical distribution switchboards.
- Modular low-voltage power distribution cabinets.
- Incoming and outgoing cable-entry arrangements.
- Electrical switchgear cable routing interfaces.
- Industrial control and power distribution enclosures.
- Electrical panel manufacturing and switchboard integration.
- Replacement of matching ABB PFCF5020 cable entry flanges.
- Switchgear enclosure refurbishment and maintenance projects.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001290B0000 |
| Product name | Cable Entry Flange W=500MM D=200MM |
| Product type | Cable entry flange |
| Nominal enclosure width | 500 mm |
| Nominal enclosure depth | 200 mm |
| Nominal enclosure dimensions | 500 × 200 mm (W × D) |
| Component category | Low-voltage switchgear enclosure accessory |
| Primary function | Cable entry interface for compatible electrical enclosures |
| Installation arrangement | As specified for the compatible System pro E power enclosure |
| Application | Compatible ABB System pro E power low-voltage switchgear assemblies |
Frequently Asked Questions
What is the ABB PFCF5020 Cable Entry Flange used for?
The ABB PFCF5020 is a cable entry flange for compatible ABB System pro E power electrical enclosures. It provides a designated enclosure interface for the cable-entry arrangement specified by the switchboard design.
What is the ABB order code for the PFCF5020?
The manufacturer order code is 1STQ001290B0000, corresponding to the ABB PFCF5020 Cable Entry Flange.
What are the dimensions of the ABB PFCF5020?
The product is designated for a nominal enclosure width of 500 mm and depth of 200 mm. These are the stated enclosure configuration dimensions and should not automatically be interpreted as the flange's exact manufactured outside dimensions.
Is the ABB PFCF5020 compatible with System pro E power switchboards?
Yes. The PFCF5020 belongs to the ABB System pro E power product range. Compatibility with a particular enclosure frame, mounting position and cable-entry arrangement should be confirmed using the applicable ABB assembly documentation.
Does the ABB PFCF5020 include cable glands or sealing accessories?
The supplied product designation does not confirm the inclusion of cable glands, grommets, seals or additional fixing components. Package contents and any required accessories should be checked against the relevant ABB product documentation.
What IP protection rating does the ABB PFCF5020 provide?
The supplied specification does not state an individual ingress protection rating for the PFCF5020. The protection rating of the completed enclosure depends on the correctly assembled flange, cable-entry arrangements, seals and associated enclosure components.
Can the ABB PFCF5020 be used for incoming and outgoing cables?
The flange is intended for cable-entry applications within compatible electrical enclosures. Its suitability for incoming or outgoing cable arrangements depends on the switchboard design, cable routing requirements and applicable ABB installation instructions.
Can the ABB PFCF5020 be installed at the top or bottom of a switchboard?
The product is identified as a cable entry flange, but the supplied designation does not establish every permitted mounting position. Top or bottom installation should be confirmed against the specific System pro E power enclosure configuration and ABB assembly documentation.
What is the difference between a cable entry flange and a blind enclosure panel?
A cable entry flange provides an interface for a designated cable-entry arrangement, whereas a blind enclosure panel is intended to cover a specified enclosure section without intentional openings. These components perform different functions and should not be treated as interchangeable without manufacturer confirmation.
Can ABB 1STQ001290B0000 be used as a replacement cable entry flange?
Yes, it may be selected as a replacement where the original equipment specifies ABB PFCF5020 or order code 1STQ001290B0000. The replacement should match the enclosure configuration, mounting arrangement and required cable-entry provisions.
Trusted by Industrial Switchgear and Electrical Panel Building Professionals
ABB System pro E power enclosure accessories support the construction, servicing and maintenance of modular low-voltage electrical distribution assemblies. The ABB PFCF5020 Cable Entry Flange provides a specifically identified cable-entry component for compatible switchboards, helping panel builders and maintenance engineers maintain the intended enclosure configuration and cable installation arrangement.
