Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO5090 IP65 Open Top/Bottom (1STQ001289B0000) is an open enclosure accessory for compatible System pro E power switchboards with a nominal width of 500 mm and depth of 900 mm.
£94.98
The ABB PTBO5090 IP65 Open Top/Bottom Panel, manufacturer order code 1STQ001289B0000, is a dedicated top or bottom enclosure accessory from the ABB System pro E power range. Designed for compatible modular low-voltage switchgear assemblies, this component features an open configuration for enclosure arrangements with a nominal width of 500 mm and depth of 900 mm.
Top and bottom enclosure components play an important role in the construction of industrial electrical switchboards. They help establish the intended enclosure structure while accommodating the openings and associated accessories required by the equipment design. The ABB PTBO5090 is specifically designated as an open top/bottom component, distinguishing it from blind or closed enclosure panels.
With an IP65 designation, the PTBO5090 belongs to an enclosure accessory configuration intended for applications requiring a high degree of protection against dust and water jets when correctly assembled. The final protection rating depends on the complete installation, including the treatment of openings, cable entries, seals and adjoining enclosure components.
Its dedicated ABB order code 1STQ001289B0000 supports accurate identification and procurement for electrical panel builders, switchgear manufacturers and industrial maintenance engineers working with compatible ABB System pro E power assemblies.
Industrial low-voltage switchgear assemblies use modular enclosure components to accommodate different equipment layouts, installation requirements and cable routing arrangements. Top and bottom sections are particularly important because they may form part of the enclosure's mechanical structure and the interfaces used for incoming or outgoing services.
The ABB PTBO5090 provides a specifically identified open top/bottom component for compatible System pro E power switchboards. Its nominal 500 mm width and 900 mm depth support selection for the corresponding enclosure configuration. The open designation distinguishes this accessory from blind panels intended to close an enclosure section without a designated opening.
The IP65 designation is associated with dust-tight protection and protection against water jets under the conditions defined by IEC/EN 60529. However, an open top or bottom component does not independently create an IP65 barrier. Any openings must be completed or protected using the appropriate manufacturer-specified components and installation methods for the required final enclosure rating.
Correct assembly may involve additional covers, cable-entry arrangements, sealing components or other accessories, depending on the equipment design. Their inclusion, quantities and specifications should be confirmed from the applicable ABB assembly documentation rather than assumed to be supplied with the PTBO5090.
The final ingress protection performance depends on the complete enclosure, including its doors, panels, joints, cable entries and installed accessories. The ABB PTBO5090 should therefore be selected and installed according to the specified System pro E power configuration, with the completed switchboard assessed against its intended environmental and electrical installation requirements.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ001289B0000 |
| Product name | IP65 Open Top/Bottom W=500MM D=900MM |
| Product type | Open top/bottom enclosure component |
| Ingress protection designation | IP65 |
| Nominal enclosure width | 500 mm |
| Nominal enclosure depth | 900 mm |
| Nominal enclosure dimensions | 500 × 900 mm (W × D) |
| Component configuration | Open |
| Installation location | Top or bottom enclosure section |
| IP65 first digit | 6 — dust-tight protection |
| IP65 second digit | 5 — protection against water jets |
| Ingress protection classification standard | IEC/EN 60529 |
| Equipment category | Low-voltage switchgear enclosure accessory |
| Primary application | Compatible open top/bottom enclosure arrangements |
| Compatible product family | ABB System pro E power |
The ABB PTBO5090 is an open top/bottom enclosure component for compatible ABB System pro E power switchgear assemblies. It is intended for equipment configurations requiring a designated open upper or lower enclosure section.
The manufacturer order code is 1STQ001289B0000, corresponding to the ABB PTBO5090 IP65 Open Top/Bottom component.
The product is designated for a nominal enclosure width of 500 mm and depth of 900 mm. These dimensions identify the corresponding enclosure configuration and should not be assumed to represent the exact manufactured outside dimensions of the component.
IP65 is an ingress protection classification defined by IEC/EN 60529. The first digit, 6, indicates dust-tight protection, while the second digit, 5, indicates protection against water jets. The completed enclosure must be correctly assembled and protected at all openings to achieve its specified rating.
An open top/bottom component is intended for an enclosure arrangement incorporating a designated opening at the upper or lower section. Unlike a blind panel, it should not be assumed to provide a completely closed covering surface.
No. The PTBO5090 is designated for an IP65 enclosure arrangement, but an open component alone cannot establish the ingress protection rating of the complete switchboard. All openings, cable entries, joints and associated enclosure components must be correctly configured and protected.
Yes. The PTBO5090 belongs to the ABB System pro E power product range. Compatibility with a particular enclosure frame, depth and mounting arrangement should be confirmed using the relevant ABB assembly documentation.
The product is designated as a top/bottom component. Its permitted installation positions and required mounting accessories depend on the applicable System pro E power enclosure configuration and ABB installation instructions.
The supplied product designation does not confirm the inclusion of cable-entry seals, covers, fixing hardware or other accessories. The required components and package contents should be checked against the relevant ABB product documentation before installation.
Yes, it may be selected as a replacement where the original equipment specifies ABB PTBO5090 or order code 1STQ001289B0000. The replacement must match the enclosure configuration, dimensions, mounting requirements and intended ingress protection arrangement.
ABB System pro E power enclosure accessories support the construction, servicing and maintenance of modular low-voltage electrical distribution assemblies. The ABB PTBO5090 IP65 Open Top/Bottom component provides a specifically identified accessory for compatible switchboard configurations, helping panel builders and maintenance engineers maintain the intended enclosure arrangement and correctly specified protection design.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.