Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO5020 (1STQ001287B0000) is an IP65-designated open top/bottom enclosure panel for compatible ABB System Pro E Power switchboards with a specified width of 500 mm and depth of 200 mm.
£53.42
The ABB PTBO5020, manufacturer order code 1STQ001287B0000, is an IP65 open top/bottom enclosure panel from the ABB System Pro E Power range, specified for an electrical cabinet configuration with a width of 500 mm and a depth of 200 mm. This enclosure accessory is intended for compatible industrial electrical switchboard and low-voltage power distribution assemblies.
The ABB PTBO5020 features an open panel configuration, distinguishing it from blind top/bottom panels that provide a closed covering arrangement. Open top and bottom panels are used where the switchboard design requires an opening within the enclosure structure, subject to the installation requirements and compatible components specified by the manufacturer.
With its IP65 designation and specified 500 × 200 mm width and depth configuration, the ABB PTBO5020 supports electrical panel construction, switchboard maintenance and enclosure refurbishment projects. Its unique ABB order code 1STQ001287B0000 enables accurate identification, procurement and replacement when this particular System Pro E Power component is required.
Industrial electrical switchboards accommodate circuit breakers, switching devices, busbar systems, protective equipment and associated electrical connections. Their enclosure structures incorporate panels and accessories selected according to the cabinet dimensions, electrical equipment layout and installation requirements. Different top and bottom panel configurations allow panel builders to select enclosure components appropriate to the intended assembly.
The ABB PTBO5020 IP65 open top/bottom panel is intended for compatible System Pro E Power switchboard configurations requiring the specified 500 mm width and 200 mm depth. Its open construction distinguishes it from blind enclosure panels and allows it to be incorporated into assemblies designed for the corresponding opening arrangement. The exact opening geometry and intended use should be confirmed against ABB technical documentation.
The IP65 classification denotes dust-tight protection and protection against water jets under the applicable test conditions. However, an open panel does not independently provide a sealed enclosure. The completed switchboard can achieve its intended protection rating only when the opening is appropriately addressed through the specified enclosure design, compatible components and any necessary sealing arrangements. Correct installation and verification of the complete assembly are therefore essential.
| Product range | System Pro E Power |
|---|---|
| Product reference | PTBO5020 |
| ABB order code | 1STQ001287B0000 |
| Product type | Open top/bottom enclosure panel |
| Manufacturer designation | IP65 OPEN TOP/BOTTOM W=500MM D=200MM |
| Protection designation | IP65 |
| Specified width | 500 mm |
| Specified depth | 200 mm |
| Panel configuration | Open |
| Installation position | Top/bottom enclosure arrangement |
| Component category | Electrical switchboard enclosure accessory |
| Application | Low-voltage electrical distribution switchboards |
| Equipment compatibility | ABB System Pro E Power assemblies specified for PTBO5020 |
The ABB PTBO5020 is an IP65 open top/bottom enclosure panel intended for compatible ABB System Pro E Power electrical switchboards. It is used where the enclosure design specifies an open panel arrangement at the top or bottom of the cabinet.
The manufacturer designation specifies a width of 500 mm and a depth of 200 mm. These identify the corresponding enclosure configuration; exact panel measurements, opening dimensions and mounting details should be confirmed against ABB technical documentation.
IP65 denotes dust-tight protection and protection against water jets under the applicable test conditions. Because the PTBO5020 is an open panel, the designation must be considered in the context of the complete enclosure assembly, including any additional components and sealing arrangements required to maintain the intended protection rating.
The ABB PTBO5020 is specified as an open top/bottom panel, whereas a blind panel provides a closed covering arrangement without a designated opening. The appropriate configuration depends on the electrical switchboard design and the compatible enclosure components specified by ABB.
The manufacturer's order code is 1STQ001287B0000. This identifies the ABB PTBO5020 IP65 open top/bottom panel for a 500 mm wide and 200 mm deep enclosure configuration within the System Pro E Power range.
ABB System Pro E Power enclosure components support the construction, configuration and maintenance of industrial electrical distribution switchboards. The ABB PTBO5020 IP65 open top/bottom panel provides a manufacturer-identified accessory for compatible cabinet assemblies requiring the specified 500 × 200 mm enclosure configuration and open panel arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.