Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001284B0000 ABB PTBB5026 IP65 Blind Top/Bottom Panel W500 D200 – System Pro E Power
ABB PTBB5026 is an IP65 blind top/bottom enclosure panel, manufacturer order code 1STQ001284B0000, for compatible System Pro E Power switchboards with a 500 mm width and 200 mm depth configuration.
£94.98
Why Choose the ABB PTBB5026 IP65 Blind Top/Bottom Panel?
The ABB PTBB5026 IP65 Blind Top/Bottom Panel, manufacturer order code 1STQ001284B0000, is a dedicated enclosure accessory from the ABB System Pro E Power range. Designed for switchboard configurations with a 500 mm width and 200 mm depth, this blind panel is intended for top or bottom enclosure positions in compatible electrical distribution assemblies.
Specified with an IP65 protection designation, the ABB PTBB5026 provides a solid, non-ventilated covering component for compatible System Pro E Power switchboard arrangements. Its blind construction is suited to enclosure positions where an unperforated panel is required rather than a ventilated or pre-punched cable-entry panel.
The ABB PTBB5026 is particularly relevant to electrical panel builders, switchboard manufacturers and maintenance engineers working with compatible System Pro E Power equipment. Its defined W500 × D200 configuration and manufacturer-specific order code support accurate selection for new installations, enclosure modifications and replacement applications.
Key Advantages
- IP65 protection designation: Intended for compatible enclosure arrangements requiring the specified ingress protection classification.
- Blind panel construction: Provides an unventilated covering for the designated enclosure opening.
- Top or bottom application: Identified for compatible top and bottom switchboard positions.
- 500 mm width configuration: Matches the specified System Pro E Power enclosure width.
- 200 mm depth configuration: Designed for the corresponding enclosure depth arrangement.
- System Pro E Power integration: Part of ABB's modular low-voltage switchboard range.
- Enclosure completion: Supports the physical closure of designated switchboard openings.
- Replacement identification: Dedicated product reference PTBB5026 simplifies component selection.
- Accurate ordering: Manufacturer order code 1STQ001284B0000 identifies the required accessory.
Key Features
- ABB PTBB5026 blind top/bottom panel.
- Manufacturer description: IP65 BLIND TOP/BOTTOM W=500MM D=200MM.
- Product family: ABB System Pro E Power.
- Ingress protection designation: IP65.
- Panel design: Blind, non-ventilated.
- Mounting position: Top or bottom of a compatible enclosure.
- Width configuration: 500 mm.
- Depth configuration: 200 mm.
- Intended for compatible low-voltage switchboard assemblies.
- Suitable for manufacturer-specified installation and replacement applications.
- ABB order code: 1STQ001284B0000.
Technical Specifications
- Manufacturer: ABB
- Product reference: PTBB5026
- ABB order code: 1STQ001284B0000
- Product family: System Pro E Power
- ABB product group: System Pro E Power
- Product type: Blind top/bottom enclosure panel
- Manufacturer description: IP65 BLIND TOP/BOTTOM W=500MM D=200MM
- Ingress protection designation: IP65
- Panel construction: Blind
- Installation position: Top or bottom
- Enclosure width designation: 500 mm
- Enclosure depth designation: 200 mm
- Nominal configuration: W500 × D200
- Primary function: Covering a designated top or bottom enclosure opening
- Intended application: Compatible electrical distribution switchboards
- Product category: Switchboard Enclosure Panels and Accessories
IP65 Blind Top/Bottom Covering for ABB System Pro E Power
The ABB PTBB5026 is designed to provide a blind covering component for compatible System Pro E Power switchboards with a 500 mm width and 200 mm depth configuration. The top/bottom designation identifies the intended enclosure positions, making the component suitable for applications where the specified opening requires a solid covering panel.
Unlike an aerated panel, a blind panel is intended to close the designated opening without incorporating ventilation apertures. This distinction is important when selecting enclosure accessories for electrical assemblies where ventilation, cable entry and ingress protection must be considered together.
The IP65 designation indicates the specified protection arrangement. Under the IP classification system, IP65 corresponds to protection against dust ingress and water jets. However, the protection achieved by the completed switchboard depends on compatible enclosure components, sealing arrangements, correct installation and the overall assembly design.
The 500 mm width and 200 mm depth values identify the intended enclosure configuration. They should not automatically be interpreted as the exact manufactured dimensions of the individual panel. Fixing positions, material, finish and any required sealing accessories should be established from the applicable ABB System Pro E Power technical documentation.
Typical Applications
- ABB System Pro E Power switchboards.
- IP65-designated enclosure assemblies.
- Blind top enclosure covering.
- Blind bottom enclosure covering.
- 500 mm wide electrical distribution cabinets.
- 200 mm deep switchboard configurations.
- Low-voltage electrical distribution assemblies.
- Industrial electrical panel construction.
- Commercial building electrical switchboards.
- Switchgear refurbishment and maintenance.
- Replacement of compatible top/bottom enclosure panels.
Frequently Asked Questions
What is the ABB PTBB5026 used for?
The ABB PTBB5026 is an IP65 blind top/bottom enclosure panel intended for compatible ABB System Pro E Power switchboards with a 500 mm width and 200 mm depth configuration.
What is the ABB order code for the PTBB5026?
The ABB manufacturer order code is 1STQ001284B0000.
What is the IP rating of the ABB PTBB5026?
The ABB PTBB5026 has an IP65 protection designation. The final protection level depends on the complete enclosure assembly and correct installation.
What does IP65 mean?
IP65 denotes protection against dust ingress and water jets under the IP classification system. The completed enclosure must be correctly assembled to achieve its specified protection level.
What are the dimensions of the ABB PTBB5026?
The component is specified for an enclosure configuration of 500 mm width × 200 mm depth. The exact manufactured panel dimensions should be confirmed using the relevant ABB technical drawing.
What does blind mean in the ABB PTBB5026 description?
Blind identifies a solid covering panel without the ventilation or cable-entry openings associated with other panel variants.
Can the ABB PTBB5026 be installed at the top or bottom of an enclosure?
The manufacturer identifies the PTBB5026 as a top/bottom panel. Its exact installation position and fixing arrangement should be confirmed against the relevant System Pro E Power assembly instructions.
Which ABB product range does the PTBB5026 belong to?
The ABB PTBB5026 belongs to the ABB System Pro E Power product range.
Is the ABB PTBB5026 a complete electrical enclosure?
No. The ABB PTBB5026 is a blind enclosure panel accessory, not a complete electrical cabinet or assembled switchboard.
Does the ABB PTBB5026 provide ventilation?
No ventilation openings are indicated by its blind-panel designation. Where enclosure cooling is required, the thermal performance of the complete assembly should be assessed separately.
What material is the ABB PTBB5026 made from?
The supplied manufacturer specification does not identify the exact construction material or finish. These details should be checked against ABB technical documentation where relevant to the installation.
Can the ABB PTBB5026 be used as a replacement top/bottom panel?
Yes, provided the existing switchboard requires the ABB PTBB5026 or manufacturer order code 1STQ001284B0000, and the enclosure configuration and sealing requirements are compatible.
Trusted by Switchboard Manufacturers and Electrical Panel Builders
ABB System Pro E Power enclosure accessories support professional low-voltage switchboard construction, electrical distribution and equipment maintenance. The ABB PTBB5026 IP65 Blind Top/Bottom Panel provides panel builders, electrical contractors and maintenance engineers with a dedicated covering component for compatible 500 mm wide × 200 mm deep enclosure configurations, supporting accurate assembly and manufacturer-specific replacement.
