Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBB5090 (1STQ001283B0000) is an IP40 blind top/bottom sheet-steel enclosure panel measuring 500 x 900 mm, designed for compatible ABB System pro E Power low-voltage distribution switchboards.
£142.53
The ABB PTBB5090 (1STQ001283B0000) is a durable IP40 blind top/bottom enclosure panel designed for compatible ABB System pro E Power low-voltage distribution switchboards. This solid external cover provides a protective enclosure surface at either the top or bottom of a switchboard structure, supporting safe and organised electrical distribution installations.
As part of the ABB System pro E Power range, the PTBB5090 is designed for modular switchboard construction, allowing electrical panel builders to configure enclosures according to installation requirements. Its solid, non-ventilated design helps prevent access to internal equipment and provides a protective barrier against solid foreign objects when incorporated into a correctly assembled IP40 enclosure.
With nominal dimensions of 500 mm wide × 900 mm deep, the PTBB5090 is suitable for compatible System pro E Power switchboard structures. Manufactured from pickled sheet steel, it is supplied as a single panel without a gasket and can be installed as either a top or bottom cover. Two panels are required when both positions need covering.
The ABB PTBB5090 blind top/bottom panel provides a solid external covering for compatible electrical distribution switchboards. Its non-ventilated construction helps protect internal electrical equipment against accidental contact and the ingress of solid foreign objects, contributing to the overall protection of a properly assembled enclosure.
The System pro E Power range is designed for modular low-voltage power distribution assemblies. The PTBB5090 supports this modular approach by allowing the same panel type to be installed at either the top or bottom of a compatible switchboard structure. Each order supplies one panel, so installations requiring both top and bottom covers must use two suitable panels.
The PTBB5090 is supplied without a gasket and is intended for IP30/IP40 blind top/bottom enclosure arrangements. Where additional protection against vertically falling water is required, the appropriate ABB top sealing kit must be selected according to the complete enclosure configuration. The finished switchboard protection rating depends on the correct combination and installation of all enclosure components.
| Series | System pro E Power |
|---|---|
| Product ID / SKU | 1STQ001283B0000 |
| Manufacturer part number | 1STQ001283B0000 |
| Product type | Blind top/bottom enclosure panel |
| Product category | Switchboard Enclosure Accessories |
| Nominal width | 500 mm |
| Nominal depth | 900 mm |
| Protection rating | IP40 in the specified enclosure configuration |
| Panel design | Blind / solid |
| Material | Pickled sheet steel |
| Gasket | Without gasket |
| Mounting position | Top or bottom |
| Fixing screws | 4 × M12 × 20 mm |
| Supply format | Single component supplied as a kit |
| Packaging quantity | 1 piece |
| Compatible system | ABB System pro E Power |
| Application | Low-voltage electrical distribution switchboards |
| Manufacturer product group | System Pro E Power |
The ABB PTBB5090 is a blind top/bottom enclosure panel designed to provide a solid protective cover for compatible ABB System pro E Power low-voltage distribution switchboards.
The PTBB5090 has nominal dimensions of 500 mm wide × 900 mm deep, making it suitable for its specified System pro E Power enclosure configuration.
The panel is intended for IP40 enclosure arrangements. The completed switchboard must incorporate the correct compatible components and installation methods to achieve the required protection classification.
Yes. The PTBB5090 is suitable for either top or bottom installation. Each order contains one panel, so two suitable panels must be ordered if both positions require covering.
The PTBB5090 is manufactured from pickled sheet steel, providing a durable solid enclosure component for compatible electrical distribution switchboards.
No. The PTBB5090 is supplied without a gasket. Additional sealing components may be necessary depending on the required enclosure protection rating and switchboard configuration.
Yes. The panel is supplied with four M12 × 20 mm screws for fitting to the intended compatible switchboard structure.
No. The PTBB5090 is designed for compatible ABB System pro E Power switchboard structures. The enclosure width, depth, mounting arrangement and required protection classification should be checked before installation.
ABB System pro E Power enclosure components are designed for professional low-voltage electrical distribution applications, helping electrical contractors, panel builders and switchboard manufacturers construct reliable modular assemblies. The ABB PTBB5090 IP40 blind top/bottom panel provides a practical, durable enclosure solution for compatible switchboard structures requiring solid top or bottom protection.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.