Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001279B0000 ABB PBWP2520 System pro E Power Bottom Kit Without Plinth 250 × 200 mm
ABB PBWP2520 System pro E power bottom enclosure kit without plinth, order code 1STQ001279B0000, designed for compatible low-voltage electrical switchboard configurations measuring 250 mm wide and 200 mm deep.
£62.16
Why Choose the ABB PBWP2520 Bottom Kit Without Plinth?
The ABB PBWP2520 is a dedicated bottom enclosure kit without plinth, designed for a 250 mm wide and 200 mm deep switchboard configuration. As part of the ABB System pro E power range, this accessory supports the construction and completion of compatible low-voltage electrical distribution cabinets and modular switchgear assemblies.
Bottom enclosure kits are important components in electrical switchboard construction, providing the necessary elements for completing the lower section of compatible cabinet structures. The ABB PBWP2520 is specifically designated for installations without a plinth, making it suitable for enclosure configurations where a separate raised base is not included in the intended assembly.
With nominal compatibility dimensions of 250 × 200 mm (W × D), the PBWP2520 is intended for use with appropriately sized ABB System pro E power switchboard structures. Identified by ABB order code 1STQ001279B0000, this component provides a manufacturer-specified solution for electrical panel builders, switchgear manufacturers and maintenance engineers requiring the correct bottom kit for a compatible enclosure.
Key Advantages
- Genuine ABB System pro E power bottom enclosure kit for compatible switchboards.
- Without-plinth configuration for installations that do not incorporate a separate raised base.
- 250 mm nominal enclosure width compatibility.
- 200 mm nominal enclosure depth compatibility.
- Supports completion of the lower section of compatible electrical cabinets.
- Designed for integration into modular low-voltage switchgear assemblies.
- Helps maintain the intended mechanical configuration of ABB System pro E power enclosures.
- Suitable for professional switchboard construction, maintenance and refurbishment.
- Clearly identified by ABB order code 1STQ001279B0000.
Key Features
- ABB System pro E power modular switchboard accessory.
- PBWP2520 bottom enclosure kit.
- Bottom kit without plinth configuration.
- Compatible enclosure width: 250 mm.
- Compatible enclosure depth: 200 mm.
- Designed for the lower section of compatible electrical distribution cabinets.
- Supports assembly of switchboard structures without a separate plinth.
- Dedicated mechanical accessory for compatible ABB enclosure configurations.
- Suitable for low-voltage electrical distribution equipment.
- Applicable to new switchboard construction and enclosure refurbishment.
- Manufacturer order code: 1STQ001279B0000.
Reliable Bottom Enclosure Assembly for ABB System pro E Power
Low-voltage electrical switchboards require appropriately selected mechanical components to form complete and correctly configured enclosure structures. The lower section of a switchboard is particularly important because it interfaces with the cabinet framework, installation surface and, where applicable, cable entry arrangements.
The ABB PBWP2520 bottom kit without plinth is specified for compatible enclosure configurations measuring 250 mm in width and 200 mm in depth. Its without-plinth designation distinguishes it from bottom assembly arrangements intended for cabinets fitted with a separate raised base.
In modular switchboard construction, selecting the correct bottom kit helps maintain the intended mechanical arrangement of the enclosure. The PBWP2520 provides a dedicated component for compatible ABB System pro E power installations, supporting accurate assembly and replacement of the specified bottom enclosure configuration.
ABB System pro E power is a modular low-voltage switchboard system developed for flexible electrical distribution applications. Its range of structural and enclosure accessories enables panel builders to configure switchboards according to the requirements of the installation. Correct assembly, fastening and compatibility with associated enclosure components are essential for maintaining the intended performance of the completed switchboard.
Typical Applications
- ABB System pro E power low-voltage switchboards.
- Industrial electrical power distribution cabinets.
- Commercial building electrical distribution assemblies.
- Bottom enclosure assembly without a separate plinth.
- Modular switchboard configurations with a 250 × 200 mm nominal footprint.
- Main and subsidiary electrical distribution boards.
- Electrical control and power distribution enclosures.
- Switchboard manufacturing and cabinet assembly.
- Maintenance and replacement of compatible bottom enclosure components.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ001279B0000 |
| Product designation | KIT BOT.WITH-OUT PLINTH W=250MM D=200MM |
| Product type | Bottom enclosure kit without plinth |
| Product category | Electrical Switchgear Enclosure Accessories |
| Compatible enclosure width | 250 mm |
| Compatible enclosure depth | 200 mm |
| Nominal enclosure configuration (W × D) | 250 × 200 mm |
| Plinth configuration | Without plinth |
| Installation position | Bottom section of compatible switchboard enclosure |
| Component function | Bottom enclosure assembly and completion |
| Equipment type | Low-voltage electrical distribution switchboards |
| Compatible system | ABB System pro E power |
| Accessory classification | Mechanical enclosure assembly kit |
Frequently Asked Questions
What is the ABB PBWP2520 used for?
The ABB PBWP2520 is a bottom enclosure kit designed for completing the lower section of compatible ABB System pro E power electrical switchboards that use a without-plinth configuration.
What enclosure dimensions is the ABB PBWP2520 designed for?
The PBWP2520 is specified for a compatible enclosure configuration with a nominal width of 250 mm and depth of 200 mm.
Does the ABB PBWP2520 include a plinth?
No. The manufacturer designation specifically identifies the PBWP2520 as a bottom kit without plinth. It is intended for compatible switchboard arrangements that do not incorporate a separate plinth as part of this kit.
Which ABB switchboard system is compatible with the PBWP2520?
The ABB PBWP2520 belongs to the System pro E power range and is intended for compatible modular low-voltage electrical distribution switchboard configurations.
What is the ABB order code for the PBWP2520 bottom kit?
The manufacturer's order code is 1STQ001279B0000, corresponding to ABB model PBWP2520.
Trusted ABB System pro E Power Enclosure Components
ABB System pro E power enclosure accessories support professional low-voltage switchboard construction, modular cabinet assembly and reliable electrical distribution installations. The ABB PBWP2520 bottom kit without plinth provides a dedicated component for compatible 250 × 200 mm switchboard configurations requiring a manufacturer-specified bottom enclosure assembly.
