Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001258C0000 ABB IP40 Aerated External Panel H2000 W625 – System Pro E Power
ABB 1STQ001258C0000 is an IP40 aerated external panel for compatible System Pro E Power switchboard assemblies with a 2000 mm height and 625 mm width configuration.
£440.42
Why Choose the ABB 1STQ001258C0000 IP40 Aerated External Panel?
The ABB 1STQ001258C0000 IP40 Aerated External Panel is a dedicated enclosure accessory from the ABB System Pro E Power range. Designed for a 2000 mm high × 625 mm wide switchboard configuration, this aerated external panel provides a ventilated enclosure component for compatible low-voltage electrical distribution assemblies.
Specified with an IP40 protection designation, the ABB 1STQ001258C0000 is intended for installations requiring an aerated external panel within the appropriate System Pro E Power enclosure configuration. Its ventilated construction supports airflow through the designated enclosure section, helping panel builders accommodate equipment ventilation requirements as part of a properly engineered switchboard assembly.
The ABB 1STQ001258C0000 is particularly relevant to professional electrical panel builders, switchboard manufacturers and maintenance engineers working with compatible System Pro E Power equipment. Its defined height, width and IP designation help ensure accurate accessory selection for new switchboard construction, refurbishment and replacement applications.
Key Advantages
- Aerated external panel design: Provides a ventilated enclosure component for compatible switchboard assemblies.
- IP40 protection designation: Intended for the specified IP40 enclosure arrangement.
- 2000 mm height configuration: Designed for compatible full-height switchboard installations.
- 625 mm width configuration: Matches the designated System Pro E Power panel arrangement.
- ABB System Pro E Power compatibility: Part of ABB's modular low-voltage switchboard system.
- Ventilation support: Allows airflow through the designated external panel section.
- Professional enclosure integration: Supports structured switchboard construction and equipment housing.
- Maintenance and refurbishment: Suitable for replacement where the same manufacturer component is specified.
- Accurate product identification: ABB order code 1STQ001258C0000 supports correct component selection.
Key Features
- ABB 1STQ001258C0000 aerated external panel.
- Part of the ABB System Pro E Power product range.
- External panel configuration for compatible electrical switchboards.
- Aerated construction for enclosure ventilation.
- IP protection designation: IP40.
- Nominal enclosure height: 2000 mm.
- Nominal enclosure width: 625 mm.
- Designed for integration into compatible System Pro E Power assemblies.
- Supports ventilation provisions within appropriately designed electrical enclosures.
- Suitable for manufacturer-specified installation and replacement applications.
- ABB manufacturer order code: 1STQ001258C0000.
Technical Specifications
- Manufacturer: ABB
- Product reference: 1STQ001258C0000
- ABB order code: 1STQ001258C0000
- Product family: System Pro E Power
- Product type: Aerated external panel
- Manufacturer description: IP40 AERATED EXT. PAN.R.H2000 W625
- Ingress protection designation: IP40
- Panel configuration: External, aerated
- Height designation: 2000 mm
- Width designation: 625 mm
- Nominal panel size configuration: 2000 × 625 mm (H × W)
- Primary function: Ventilated external covering for a compatible switchboard assembly
- Application: Low-voltage electrical distribution switchboards
- Product category: Switchboard Enclosure Panels and Accessories
- ABB product group: System Pro E Power
Ventilated External Panel for ABB System Pro E Power Switchboards
The ABB 1STQ001258C0000 provides an aerated external covering for compatible System Pro E Power switchboard configurations. Its 2000 mm height and 625 mm width designations identify the intended enclosure arrangement, while the ventilated panel construction allows air movement through the designated external section.
Ventilation is an important consideration in electrical distribution assemblies containing equipment that generates heat during operation. An aerated panel can form part of the overall thermal management strategy, but the cooling performance of the completed switchboard depends on equipment losses, internal layout, airflow paths, ambient conditions and the complete enclosure design.
The IP40 designation identifies the specified protection arrangement. The ingress protection achieved by the complete installation depends on compatible enclosure components, correct assembly and any additional openings or accessories. The ABB 1STQ001258C0000 should be selected using the applicable System Pro E Power technical documentation to confirm its mounting position, fixing arrangement and compatibility.
Typical Applications
- ABB System Pro E Power switchboards.
- Low-voltage electrical distribution assemblies.
- 2000 mm high switchboard configurations.
- 625 mm wide enclosure arrangements.
- Ventilated external switchboard panels.
- Industrial electrical distribution cabinets.
- Commercial building power distribution systems.
- Electrical switchboard manufacturing.
- Switchgear refurbishment and maintenance.
- Replacement of compatible System Pro E Power aerated panels.
Frequently Asked Questions
What is the ABB 1STQ001258C0000 used for?
The ABB 1STQ001258C0000 is an IP40 aerated external panel intended for compatible ABB System Pro E Power electrical switchboard assemblies.
What are the dimensions of the ABB 1STQ001258C0000?
The panel is specified for a 2000 mm height × 625 mm width enclosure configuration. Its exact manufactured dimensions and thickness should be confirmed against the relevant ABB technical drawing.
What is the IP rating of the ABB 1STQ001258C0000?
The manufacturer specifies an IP40 protection designation. The final ingress protection classification depends on the complete switchboard assembly and correct installation.
What does aerated mean for this ABB external panel?
Aerated indicates that the panel has a ventilated construction intended to permit airflow through the designated enclosure section.
Which ABB product range does the 1STQ001258C0000 belong to?
The ABB 1STQ001258C0000 belongs to the System Pro E Power product range.
Is the ABB 1STQ001258C0000 a complete switchboard enclosure?
No. It is an external panel component, not a complete electrical switchboard enclosure or assembled distribution system.
Does the ABB 1STQ001258C0000 provide ventilation?
Yes. The aerated design provides a ventilated panel section. Actual airflow and thermal performance depend on the completed switchboard design and installation conditions.
Is the ABB 1STQ001258C0000 suitable for outdoor installations?
Outdoor suitability should not be assumed from the IP40 designation. The complete enclosure's environmental protection and installation conditions must be assessed before outdoor use.
What material is the ABB 1STQ001258C0000 made from?
The supplied specification identifies an aerated external panel but does not establish its exact construction material. Material properties should be confirmed using the applicable ABB technical documentation.
Can the ABB 1STQ001258C0000 be used as a replacement panel?
Yes, provided the existing System Pro E Power assembly specifies 1STQ001258C0000 and the enclosure dimensions, fixing arrangement and protection requirements are compatible.
Does the ABB 1STQ001258C0000 include electrical devices?
No electrical devices are identified as part of this product. It is an aerated external enclosure panel, rather than a circuit breaker, switch or complete distribution assembly.
What is the ABB order code for this IP40 aerated external panel?
The ABB manufacturer order code is 1STQ001258C0000, corresponding to the IP40 aerated external panel for a 2000 mm high × 625 mm wide System Pro E Power configuration.
Trusted by Switchboard Manufacturers and Electrical Panel Builders
ABB System Pro E Power components support professional low-voltage switchboard construction, electrical distribution and equipment maintenance. The ABB 1STQ001258C0000 IP40 Aerated External Panel provides switchboard manufacturers, electrical contractors and industrial maintenance engineers with a dedicated ventilated panel component for compatible 2000 × 625 mm enclosure arrangements, supporting organised assembly construction and appropriate ventilation planning.
