Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Rittal DK 7979.402 is a 230 V AC, 16 A single-phase managed PDU with an IEC C20 input, six individually switchable and monitored C13 outlets, 3.7 kW rated power and Gigabit network connectivity for professional IT rack power management.
£1,104.29
The Rittal DK 7979.402 is an intelligent managed Power Distribution Unit (PDU) designed for high-end power distribution, energy measurement, monitoring and remote outlet control within IT server and network enclosures. As part of the Rittal DK PDU managed series, it combines 6 IEC 60320 C13 outlets with measurement and switching functionality for every individual output slot.
Designed for professional IT infrastructure, the DK 7979.402 provides comprehensive current and power monitoring at individual outlet level. Each C13 output is individually switchable, while programmable switching logic and configurable start-up behaviour following voltage recovery provide precise control over connected equipment. Measurement accuracy of ±1% for active energy supports reliable capacity planning and energy management.
Operating from a 230 V AC, 16 A single-phase supply through an IEC 60320 C20 input, the PDU provides a rated power capacity of 3.7 kW. Its compact 450 × 44 × 144 mm housing provides a 482.6 mm (19") / 1 U format and may also be installed vertically in the Zero-U space of compatible Rittal VX IT and TS IT racks.
Managed PDUs such as the Rittal DK 7979.402 provide significantly greater visibility and control than conventional rack power strips. Measurement and monitoring at each individual C13 outlet allow administrators to analyse the consumption of connected equipment, while individual outlet switching enables remote power control and power cycling without physical access to the rack.
The integrated Web server and dual Gigabit Ethernet interfaces enable remote access to measurement and status information. Support for protocols including SNMP, OPC-UA and Modbus/TCP allows consumption data to be forwarded to compatible DCIM and infrastructure management platforms, while the CAN bus interface can accommodate up to 16 environmental sensors for wider rack monitoring.
Tick the specs you need, then view products that match.
| Material | Aluminium | |
|---|---|---|
| Accessory Type | Power Distribution | |
| Manufacturer | Rittal | |
| Series | DK PDU managed | |
| Model | DK 7979.402 | |
| Product type | Managed Power Distribution Unit (PDU) | |
| Design | 482.6 mm (19") / 1 U | |
| Number of outlets | 6 | |
| Outlet type | IEC 60320 C13 | |
| Outlets per phase | 6 | |
| Outlet switching | Individually switchable | |
| Measurement | Per individual output slot | |
| Rated operating voltage | 230 V AC | |
| Rated current | 16 A | |
| Rated power | 3.7 kW | |
| Input phases | 1-phase | |
| Input connection | IEC 60320 C20 | |
| Frequency | 50–60 Hz | |
| Measurement accuracy | ±1% (kWh) to EN 62053-21 | |
| Network interfaces | 2 × Gigabit Ethernet, 10/100/1000 Mbit/s | |
| Sensor interface | CAN bus RJ45 for up to 16 sensors | |
| USB interface | USB for firmware updates, mass configuration and data logging | |
| Serial interface | RS232 | |
| Digital input | 1 | |
| Alarm relay | 48 V DC / 2 A | |
| Protocols | IPv4/IPv6, HTTP, HTTPS, SSL, SSH, Telnet, NTP, DHCP, DNS, Syslog, SNMP v1/v2c/v3, OPC-UA, Modbus/TCP and FTP/SFTP | |
| Dimensions (W × H × D) | 450 × 44 × 144 mm | |
| Housing material | Aluminium | |
| Finish | Anodised, RAL 9005 black | |
| Protection rating | IP20 | |
| Protection class | Class I | |
| Pollution degree | 2 | |
| Overvoltage category | II | |
| Operating temperature | 5–50 °C | |
| Storage temperature | -20–70 °C | |
| Ambient humidity | 10–95% RH, non-condensing | |
| Maximum operating altitude | 3000 m | |
| MTBF at 40 °C | 100,000 hours | |
| Compatible VX IT enclosure frame | ≥ 800 mm | |
| Compatible VX IT 19" mounting angles | ≥ 800 mm | |
| Net weight | 2.8 kg | |
| Gross weight | 3 kg | |
| Pack quantity | 1 pc(s) | |
| EAN | 4028177948044 | |
| Customs tariff number | 85366990 | |
| ETIM 9 | EC002762 | |
| ECLASS 8.0 | 27142604 |
The Rittal DK 7979.402 is a managed PDU designed to distribute, measure, monitor and remotely control electrical power for equipment installed in IT server racks, network enclosures and data centre infrastructure.
The PDU provides 6 IEC 60320 C13 outlets, with energy measurement, monitoring and switching functions available for each individual output slot.
The DK 7979.402 operates from a 230 V AC, single-phase, 16 A supply through an IEC 60320 C20 input and provides a rated power capacity of 3.7 kW.
Yes. All 6 C13 output slots can be individually switched, measured and monitored, providing detailed control and consumption information for connected equipment.
Yes. The PDU incorporates dual Gigabit Ethernet interfaces and an integrated Web server and supports protocols including SNMP, OPC-UA and Modbus/TCP for integration with compatible IT and data centre management systems.
Rittal PDU managed power distribution units combine individual outlet energy measurement, remote switching, network-based monitoring and environmental sensor integration to provide comprehensive power management for professional data centres, server rooms and IT infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.