Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CTFLAG-CAL Partex Insulated Flag Terminal Crimp Tool, calibration certificate
Partex CTFLAG-CAL insulated flag terminal crimp tool supplied with a calibration certificate, designed for crimping compatible right-angle insulated flag connectors in professional electrical installation, panel building and quality-controlled maintenance applications.
£95.97
Why Choose the Partex CTFLAG-CAL Insulated Flag Terminal Crimp Tool with Calibration Certificate?
The Partex CTFLAG-CAL is a specialist insulated flag terminal crimp tool supplied with a calibration certificate, designed for professional electrical installers who require reliable crimping equipment and supporting calibration documentation. Intended for use with compatible insulated flag terminals, this tool helps create secure electrical connections in control panels, industrial machinery, electrical equipment and professional wiring assemblies.
Insulated flag terminals feature a distinctive right-angle connection design, allowing a cable to connect to a compatible male blade terminal while reducing the space required behind the connection point. These terminals are particularly useful in electrical installations where conventional straight push-on terminals may create clearance or cable routing difficulties. The Partex CTFLAG-CAL is designed to support correct crimp termination of compatible insulated flag connectors, helping establish dependable electrical contact and mechanical conductor retention.
Supplied with a calibration certificate, the CTFLAG-CAL is particularly suitable for electrical contractors, panel builders, OEM manufacturers and industrial maintenance engineers working within documented quality assurance procedures. Combining dedicated insulated flag terminal crimping capability with supporting calibration records, it provides a practical tooling solution for professional electrical assembly and maintenance applications.
Key Advantages
- Dedicated insulated flag terminal crimp tool for professional electrical termination.
- Calibration certificate included to support documented tool management procedures.
- Designed for use with compatible insulated flag terminals.
- Supports secure compression connections between conductors and suitable flag connectors.
- Helps promote consistent crimping practices when used with correctly matched terminals and cables.
- Suitable for electrical connections where right-angle terminal configurations are required.
- Calibration documentation supports quality assurance and inspection record keeping.
- Useful for electrical control panel assembly, industrial machinery wiring and equipment maintenance.
- Practical for OEM manufacturers and electrical contractors operating controlled installation procedures.
- Partex CTFLAG-CAL combines specialist terminal crimping equipment with supporting calibration documentation.
Key Features
- Partex CTFLAG-CAL insulated flag terminal crimp tool.
- Supplied with a calibration certificate.
- Designed for compatible insulated flag electrical terminals.
- Suitable for compression crimp termination applications.
- Intended for use with correctly prepared electrical conductors.
- Supports secure mechanical and electrical connections when correctly used.
- Specialist tooling for insulated right-angle push-on terminal connections.
- Suitable for professional electrical assembly and maintenance work.
- Useful for control panel wiring and electrical equipment manufacturing.
- Calibration documentation supports tool identification and quality control records.
- Designed for use with terminal and conductor combinations approved for the tool.
- Suitable for workshops and industrial electrical maintenance environments.
- Manufacturer part number: CTFLAG-CAL.
Professional Insulated Flag Terminal Crimping with Calibration Documentation
Insulated flag terminals are commonly used in electrical equipment where space-efficient, right-angle push-on connections are required. Their angled configuration allows the conductor to approach the mating blade terminal from the side, helping installers route cables around adjacent components and reduce unnecessary bending close to the connection point. The Partex CTFLAG-CAL is intended to support reliable crimping of compatible insulated flag terminals used in these applications.
A dependable crimped connection requires the correct combination of terminal, conductor and crimping tool. Insulated terminals incorporate a conductive connection barrel and an insulating sleeve, so the selected crimping equipment must be suitable for the terminal construction. Using a compatible tool helps establish the required compression without unnecessarily damaging the terminal or its insulation. Installers should always confirm the approved terminal types and conductor sizes before use.
The inclusion of a calibration certificate makes the CTFLAG-CAL particularly relevant to organisations that maintain documented inspection and quality assurance procedures. Calibration records can help businesses identify their tools, record calibration status and support installation quality documentation. The supplied certificate should be checked for its issuing body, calibration date, test results, traceability and any accreditation relevant to the purchaser's requirements. A calibration certificate does not replace the need for correct terminal selection or crimp inspection.
For correct installation, the conductor should be stripped to the terminal manufacturer's recommended length without damaging the strands. The prepared cable should then be inserted into the insulated flag terminal and crimped using the appropriate tool positioning and procedure. The completed termination should be inspected for conductor retention, crimp formation and insulation integrity before connection to a compatible male blade terminal. The finished assembly must be suitable for the circuit voltage, current and environmental conditions. The CTFLAG-CAL should not be used on live electrical conductors unless specifically approved for that purpose.
Typical Applications
- Crimping compatible insulated flag terminals.
- Electrical control panel manufacturing and assembly.
- Industrial machinery and equipment wiring.
- Right-angle push-on electrical connector termination.
- Electrical installations with restricted terminal clearance.
- OEM electrical equipment manufacturing.
- Appliance and electrical equipment maintenance.
- Professional wiring harness and cable assembly work.
- Electrical workshops requiring documented crimping tool calibration.
- Quality-controlled electrical installation and maintenance procedures involving compatible insulated flag connectors.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Crimping tool | |
|---|---|---|
| Manufacturer | Partex | |
| Model | CTFLAG-CAL | |
| Product type | Insulated flag terminal crimping tool | |
| Tool application | Electrical terminal compression crimping | |
| Terminal compatibility | Compatible insulated flag terminals | |
| Terminal configuration | Right-angle flag-style push-on connectors | |
| Connection method | Mechanical compression crimping | |
| Conductor application | Electrical conductors compatible with the selected terminals | |
| Crimping range | Refer to manufacturer compatibility information | |
| Calibration documentation | Calibration certificate included | |
| Primary function | Securing compatible insulated flag terminal barrels to prepared conductors | |
| Typical users | Electricians, panel builders, OEM manufacturers and maintenance engineers | |
| Typical installation environments | Electrical workshops, panel assembly and industrial maintenance | |
| Product reference | CTFLAG-CAL | |
| HS Code | 82032000 |
Frequently Asked Questions
What is the Partex CTFLAG-CAL crimp tool used for?
The Partex CTFLAG-CAL is designed for crimping compatible insulated flag terminals onto electrical conductors. These right-angle push-on connectors are commonly used in control panels, electrical equipment and industrial machinery where compact cable routing is required.
Does the Partex CTFLAG-CAL include a calibration certificate?
Yes. The Partex CTFLAG-CAL is supplied with a calibration certificate. This documentation can support tool management, inspection records and quality assurance procedures. The certificate should be checked for its calibration date, issuing body, test information and suitability for any specific project or accreditation requirements.
What types of terminals can the Partex CTFLAG-CAL crimp?
The CTFLAG-CAL is intended for compatible insulated flag terminals, which feature a right-angle push-on connection. The exact terminal designs, insulation types and conductor sizes should be confirmed against Partex tooling compatibility information before use.
Why use a dedicated crimp tool for insulated flag terminals?
A dedicated insulated flag terminal crimp tool is designed to accommodate compatible terminal constructions and support correct compression of the conductor connection. Using appropriately matched tooling helps achieve secure electrical contact and mechanical retention while reducing the risk of damaging the terminal or its insulation.
Is the Partex CTFLAG-CAL suitable for quality-controlled electrical installations?
Yes. The Partex CTFLAG-CAL is a practical option for electrical contractors, panel builders and OEM manufacturers requiring insulated flag terminal crimping equipment with calibration documentation. Users should verify that the supplied certificate meets their project requirements and maintain the tool's calibration status in accordance with their quality procedures.
Trusted by Electrical Installers and Industrial Engineers
Partex insulated terminal crimping tools support professional electrical installation, control panel manufacturing and industrial equipment maintenance. The CTFLAG-CAL combines specialist insulated flag terminal crimping capability with an included calibration certificate, helping electricians, panel builders and quality-conscious engineering teams maintain dependable termination practices and supporting tool documentation.
