Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CT15F-CAL Partex Crimp Tool For Use With F-Crimp Connectors, calibration certificate
Partex CT15F-CAL hand-operated ratchet crimping tool for compatible F-crimp connectors with 1–1.5 mm², 2.5 mm² and 4–6 mm² conductors and 2.8 mm, 4.8 mm and 6.3 mm tabs, supplied with a calibration certificate for professional electrical termination and quality assurance.
£89.39
Why Choose the Partex CT15F-CAL F-Crimp Connector Crimp Tool with Calibration Certificate?
The Partex CT15F-CAL is a professional hand-operated F-crimp connector crimping tool supplied with a calibration certificate, designed for secure electrical cable termination in industrial wiring, control panel assembly and cable harness manufacturing. Based on the Partex CT15-F crimping tool, this calibrated version provides controlled crimping of compatible male and female F-crimp connectors while supporting documented tool calibration and quality assurance procedures.
The CT15F-CAL is suitable for compatible F-crimp connectors used with 1–1.5 mm², 2.5 mm² and 4–6 mm² conductors, including connector configurations with 2.8 mm, 4.8 mm and 6.3 mm tabs. Its precision crimping mechanism is designed to compress both the conductor and insulation support sections of an F-crimp connector in a single operation, helping produce mechanically secure and electrically reliable terminations.
Featuring a three-jaw ratchet crimping mechanism, automatic jaw opening, an emergency release lever and a calibration/load adjustment cog, the CT15F-CAL is designed for repeatable professional use. The included calibration certificate provides supporting documentation for organisations operating controlled tooling, inspection and maintenance procedures.
Key Advantages
- Professional F-crimp connector crimping tool with calibration certificate.
- Designed for compatible 1–1.5 mm², 2.5 mm² and 4–6 mm² conductors.
- Suitable for F-crimp connector configurations with 2.8 mm, 4.8 mm and 6.3 mm tabs.
- Simultaneous conductor and insulation support crimping reduces the need for separate operations.
- Precision three-jaw mechanism provides controlled connector compression.
- Integrated ratchet mechanism helps ensure completion of the crimping cycle.
- Automatic jaw opening following completion of the crimp.
- Emergency release lever provides additional operational control.
- Calibration/load adjustment mechanism supports consistent crimping performance.
- Calibration documentation supports tool traceability and quality assurance records.
- Ergonomically designed moulded handles help reduce operator fatigue.
Key Features
- Partex CT15F-CAL calibrated F-crimp connector tool.
- Based on the Partex CT15-F hand-operated crimping tool.
- Calibration certificate supplied with the tool.
- Suitable for 1–1.5 mm², 2.5 mm² and 4–6 mm² conductor sizes.
- Designed for compatible male and female F-crimp connectors.
- Supports connector configurations with 2.8 mm, 4.8 mm and 6.3 mm tabs.
- Precision three-jaw crimping mechanism.
- Simultaneous conductor and insulation grip compression.
- High-precision cast jaw set for controlled crimping.
- Ratchet-controlled crimping cycle.
- Automatic jaw opening after completion of the crimping operation.
- Emergency ratchet release lever.
- Calibration and load adjustment cog.
- Ergonomically designed moulded plastic handles.
- Hand-held construction for professional electrical installation and cable assembly.
Consistent F-Crimp Termination with Calibration Documentation
F-crimp connectors are commonly used for solderless electrical connections in wiring harnesses, industrial equipment and control systems. Their open-barrel construction incorporates separate conductor and insulation support sections, which must be compressed correctly to establish a secure electrical connection and provide mechanical support to the cable. The use of appropriately matched crimping equipment helps achieve consistent termination quality.
The Partex CT15F-CAL combines the controlled crimping operation of the CT15-F tool with the additional benefit of a calibration certificate. This documentation can support internal quality management, equipment inspection and tool maintenance procedures where crimping performance must be recorded. Correct connector selection, conductor preparation and crimping position remain essential, and the certificate should be checked for its stated calibration results, date, scope and traceability information.
Typical Applications
- Professional crimping of male and female F-crimp electrical connectors.
- Industrial control panel wiring and assembly.
- Quality-controlled electrical wiring harness manufacturing.
- Automotive and vehicle electrical connections.
- Industrial machinery wiring and equipment maintenance.
- Electrical appliance and equipment assembly.
- Quick-disconnect terminal preparation and installation.
- Electrical production environments requiring documented tool calibration.
- Maintenance departments operating tool inspection and calibration programmes.
Technical Specifications
Tick the specs you need, then view products that match.
| Conductor Size | 1–1.5 mm² | |
|---|---|---|
| Device Type | Crimping tool | |
| Manufacturer | Partex | |
| Series | F-Crimp Connector Crimping Tools | |
| Model | CT15F-CAL | |
| Base tool | CT15-F | |
| Product type | F-crimp connector crimping tool with calibration certificate | |
| Tool operation | Manual / hand-operated | |
| Compatible conductor sizes | 1–1.5 mm², 2.5 mm² and 4–6 mm² | |
| Compatible connector tab widths | 2.8 mm, 4.8 mm and 6.3 mm | |
| Connector compatibility | Male and female F-crimp connectors | |
| Crimping mechanism | Three-jaw ratchet system | |
| Jaw construction | High-precision cast jaw set | |
| Crimping operation | Simultaneous conductor and insulation support compression | |
| Ratchet release | Emergency release lever | |
| Crimp cycle completion | Automatic jaw opening | |
| Adjustment | Calibration / load adjustment cog | |
| Handle design | Ergonomic moulded plastic grips | |
| Calibration documentation | Calibration certificate supplied | |
| Power source | Manual operation | |
| HS Code | 82032000 |
Frequently Asked Questions
What is the Partex CT15F-CAL used for?
The Partex CT15F-CAL is a hand-operated F-crimp connector crimping tool supplied with a calibration certificate, designed for terminating compatible male and female F-crimp connectors in electrical wiring, cable harnesses and industrial equipment.
What is the difference between the Partex CT15F and CT15F-CAL?
The CT15F-CAL is the calibration certificate version of the Partex CT15F F-crimp connector tool. It provides the same core crimping functionality with additional calibration documentation for quality assurance and tool record-keeping.
What cable and connector sizes are compatible with the CT15F-CAL?
The tool is designed for compatible F-crimp connectors used with 1–1.5 mm², 2.5 mm² and 4–6 mm² conductors, including male and female connector configurations with 2.8 mm, 4.8 mm and 6.3 mm tabs.
Does the CT15F-CAL crimp the conductor and insulation support together?
Yes. The CT15F-CAL is designed to crimp both the conductor and insulation support sections simultaneously, helping create a secure electrical termination in a single controlled crimping operation.
Why is a calibration certificate useful for the Partex CT15F-CAL?
The calibration certificate provides documented information about the tool's calibration and supports internal quality assurance, equipment inspection and maintenance records. The specific calibration results, scope and traceability details should be checked against the supplied certificate.
Trusted by Electrical Installers and Quality-Controlled Production Teams
Partex electrical connection and termination tools support professional electrical installation, industrial maintenance and wiring harness assembly. The CT15F-CAL F-crimp connector tool combines precision three-jaw compression, ratchet-controlled operation and calibration documentation to support dependable electrical terminations and quality-controlled cable assembly processes.
