Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CT10-95I Partex 10-95mm Copper Tube Terminal Crimp Tool
Partex CT10-95I is a copper tube terminal crimping tool with a nominal 10-95 mm² working range, designed for crimping compatible copper cable lugs and tubular terminals in professional electrical installation, panel building and industrial maintenance applications.
£249.82
Why Choose the Partex CT10-95I Copper Tube Terminal Crimp Tool?
The Partex CT10-95I is a specialist copper tube terminal crimping tool designed for installing compatible copper tube cable lugs and terminals across a nominal conductor size range of 10–95 mm². It provides a practical solution for electrical contractors, panel builders and industrial maintenance engineers who need to create secure crimp connections on copper power cables.
Designed for professional electrical installation work, the CT10-95I is used to compress a compatible copper tube terminal barrel around a prepared conductor. Correct crimping helps establish the mechanical retention and electrical contact required for reliable cable termination in power distribution equipment, control panels, industrial machinery and electrical assemblies.
The 10–95 mm² working range makes this tool suitable for a variety of medium- and larger-section copper cable termination tasks. Whether preparing ring terminals for switchgear, cable lugs for busbar connections or other compatible copper tube terminals, the Partex CT10-95I provides a dedicated crimping solution for professional installation and maintenance applications.
Key Advantages
- 10–95 mm² crimping range accommodates a variety of copper tube terminal sizes.
- Designed for copper tube terminals rather than general-purpose insulated electrical connectors.
- Supports secure cable termination by compressing compatible terminal barrels around copper conductors.
- Versatile working range reduces the need for separate tools for every conductor size within its supported capacity.
- Suitable for professional electrical work in control panels, switchgear and power distribution equipment.
- Useful for installation and maintenance of copper cable lugs and compatible tubular terminals.
- Dedicated crimping application helps installers achieve consistent results when following the correct tooling procedure.
- Partex tool identification makes it straightforward to specify the required tool for compatible termination work.
Key Features
- Partex CT10-95I copper tube terminal crimp tool.
- Nominal crimping capacity: 10–95 mm².
- Designed for crimping compatible copper tube cable terminals.
- Suitable for preparing electrical cable terminations in industrial installations.
- Supports crimp connections between copper conductors and correctly matched tubular terminal barrels.
- Applicable to compatible copper tube ring terminals and cable lugs.
- Intended for use with the correct crimping arrangement for the selected terminal size.
- Suitable for electrical contractors, control panel manufacturers and maintenance engineers.
- Useful for workshop assembly, electrical installation and cable termination work.
- Dedicated tool for copper tube terminal crimping applications.
How to Achieve Reliable Copper Tube Terminal Crimp Connections
A properly installed copper tube terminal provides an electrical and mechanical connection between a copper conductor and its cable lug. The Partex CT10-95I is intended for crimping suitable terminals within the 10–95 mm² range. Selecting the correct terminal and tooling combination is essential because the conductor cross-section, terminal barrel construction and required crimp profile must all be compatible.
Before crimping, the cable should be stripped to the appropriate length without damaging the conductor strands. The conductor should then be fully inserted into the copper tube terminal barrel. The installer must use the crimping arrangement specified for the terminal and complete the crimp according to the applicable instructions. A finished termination should be checked for correct compression, conductor retention and visible installation defects.
The CT10-95I should only be used on terminal types and sizes supported by its tooling specification. The stated 95 mm² maximum means it should not be assumed suitable for larger terminals such as 120 mm², 150 mm² or 240 mm² cable lugs. After crimping, the connection should receive any insulation, strain relief and mechanical protection required by the electrical installation.
Typical Applications
- Crimping compatible copper tube ring terminals.
- Preparing copper cable lugs for electrical equipment connections.
- Industrial control panel manufacturing and assembly.
- Electrical switchgear and distribution board installation.
- Motor control centre wiring and maintenance.
- Industrial machinery cable termination.
- Power cable preparation in electrical workshops.
- Electrical maintenance, repair and refurbishment.
- OEM electrical equipment manufacturing.
- Professional copper conductor termination within the 10–95 mm² tooling range.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Crimping tool | |
|---|---|---|
| Conductor Size | 10 mm² | |
| Manufacturer | Partex | |
| Model | CT10-95I | |
| Product type | Copper tube terminal crimping tool | |
| Nominal crimping range | 10–95 mm² | |
| Minimum nominal conductor size | 10 mm² | |
| Maximum nominal conductor size | 95 mm² | |
| Primary application | Crimping compatible copper tube terminals and cable lugs | |
| Terminal compatibility | Copper tube terminals within the supported tooling range | |
| Typical conductor material | Copper | |
| Connection process | Compression crimping | |
| Typical installation environments | Electrical panels, switchgear, industrial equipment and power distribution assemblies | |
| Tool selection | Match the crimping arrangement to the terminal manufacturer's requirements | |
| HS Code | 82032000 |
Frequently Asked Questions
What is the Partex CT10-95I used for?
The Partex CT10-95I is a copper tube terminal crimping tool designed to compress compatible copper tube cable lugs and terminals onto copper conductors. It is suitable for professional electrical installation, panel building and industrial maintenance applications.
What cable sizes can the Partex CT10-95I crimp?
The CT10-95I has a nominal crimping range of 10–95 mm². The terminal, conductor and crimping arrangement must be compatible with the tool's supported specifications.
Can the CT10-95I be used with Partex copper tube ring terminals?
The CT10-95I is intended for compatible copper tube terminals, including suitable ring-type cable lugs within its nominal working range. Always confirm the terminal's crimping requirements and the tool's supported crimp arrangement before use.
Can the Partex CT10-95I crimp 120 mm² or 150 mm² terminals?
No. The stated nominal crimping range is 10–95 mm², so 120 mm² and 150 mm² terminals fall outside that range. A crimping tool specifically rated for those larger conductor sizes is required.
Is the CT10-95I suitable for insulated electrical terminals?
The CT10-95I is specified as a copper tube terminal crimp tool. It should not be assumed suitable for insulated red, blue or yellow crimp terminals unless that application is expressly supported by the tool manufacturer's instructions.
Why is the correct crimping tool important for copper tube terminals?
Correct crimping equipment helps achieve the required compression between the copper conductor and terminal barrel. An unsuitable tool or crimping arrangement can produce an unreliable electrical connection, insufficient mechanical retention or damage to the terminal.
Who typically uses the Partex CT10-95I?
The CT10-95I is suitable for electrical contractors, industrial maintenance engineers, switchgear installers, panel builders and OEM equipment manufacturers carrying out compatible copper tube cable termination work.
Trusted by Electrical Installers and Panel Builders
The Partex CT10-95I provides a dedicated copper tube terminal crimping solution for nominal conductor sizes from 10 mm² to 95 mm², supporting professional cable preparation and reliable termination practices in industrial electrical installations, switchgear and control panel assemblies.
