Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CEFT6 Partex 50-95mm Cord End Ferrule Crimp Tool
Partex CEFT6 cord end ferrule crimping tool with a 50-95 mm² working range, designed for preparing large-section flexible stranded electrical conductors using compatible ferrules in industrial electrical installations and panel assembly.
£196.88
Why Choose the Partex CEFT6 Cord End Ferrule Crimp Tool?
The Partex CEFT6 is a specialist cord end ferrule crimping tool designed for terminating large-section flexible stranded electrical conductors fitted with compatible bootlace ferrules. With a stated crimping capacity of 50–95 mm², this tool provides a practical solution for electrical engineers, industrial panel builders and maintenance professionals working with substantial cable sizes in power distribution and industrial electrical equipment.
Correctly crimped cord end ferrules help consolidate the individual strands of flexible electrical conductors, producing a prepared cable end for insertion into compatible electrical terminals. The Partex CEFT6 ferrule crimper is intended for use with suitable ferrules within its specified conductor-size range, supporting consistent cable preparation and dependable electrical terminations when operated according to the manufacturer's instructions.
Designed for professional electrical installation and workshop applications, the CEFT6 crimp tool is particularly relevant to large-section cable termination work in industrial control cabinets, switchgear assemblies, distribution equipment and machinery installations. Its dedicated 50–95 mm² working range makes it a useful addition to an electrical technician's tooling when preparing compatible large-diameter flexible conductors.
Key Advantages
- 50–95 mm² crimping capacity supports the termination of large-section flexible electrical conductors using compatible cord end ferrules.
- Specialist ferrule crimping application provides a dedicated solution for professional cable preparation.
- Suitable for large conductor sizes commonly encountered in industrial power distribution and electrical equipment assemblies.
- Supports consistent crimp preparation when the correct ferrule, conductor and crimping procedure are used.
- Helps prevent loose conductor strands by enabling the installation of properly crimped cord end ferrules.
- Professional installation versatility makes the tool useful for switchgear manufacturers, control panel builders and electrical maintenance teams.
- Dedicated crimping range simplifies tool selection for compatible ferrules between 50 mm² and 95 mm².
- Reusable installation tool supports repeated cable termination work in workshops and industrial environments.
- Partex accessory compatibility makes it a practical choice when assembling electrical connections using suitable Partex cord end ferrules.
Key Features
- Partex CEFT6 cord end ferrule crimping tool.
- 50–95 mm² nominal crimping range.
- Designed for compatible large-section cord end ferrules.
- Suitable for preparing flexible stranded electrical conductors for terminal installation.
- Dedicated crimping application for electrical cable-end preparation.
- Supports ferrule termination work in industrial electrical installations.
- Suitable for professional control panel and switchgear assembly workflows.
- Useful for cable preparation during electrical equipment manufacturing and maintenance.
- Designed for repeated use with compatible ferrule and conductor combinations.
- Identified by manufacturer part number CEFT6.
Reliable Large-Section Ferrule Crimping for Industrial Electrical Installations
Large-section flexible electrical conductors contain numerous individual wire strands that must be correctly prepared before connection to compatible electrical terminals. A cord end ferrule provides a tubular metal sleeve that gathers these strands into a consolidated termination. The Partex CEFT6 is designed to perform the crimping stage for compatible ferrules within its 50–95 mm² capacity, helping electrical installers achieve repeatable cable-end preparation.
The correct crimping process is especially important when working with substantial conductor cross-sections. An unsuitable tool, incorrect ferrule size or improperly prepared conductor can produce an inadequate termination. Using the CEFT6 ferrule crimp tool with approved ferrules and the appropriate operating procedure helps support consistent mechanical compression and reliable conductor preparation.
Before crimping, the conductor should be stripped to the length required by the selected ferrule, with all strands inserted fully into its metal barrel. The ferrule should then be crimped using the manufacturer's specified tool arrangement and procedure. After crimping, the completed termination should be inspected for correct compression, secure conductor retention and compatibility with the receiving electrical terminal. The stated 50–95 mm² range should not be treated as confirmation that every ferrule style or barrel geometry within those conductor sizes is compatible.
Typical Applications
- Crimping large-section cord end ferrules for industrial electrical installations.
- Preparing flexible conductors for compatible power distribution terminals.
- Low-voltage switchgear and electrical distribution board assembly.
- Industrial control panel manufacturing and cable termination.
- Motor control centre wiring and electrical equipment assembly.
- OEM machinery and industrial automation equipment manufacturing.
- Electrical cabinet interconnection and power supply wiring.
- Professional electrical maintenance and refurbishment work.
- Workshop cable preparation using compatible 50–95 mm² ferrules.
Technical Specifications
Tick the specs you need, then view products that match.
| Conductor Size | 50 mm² | |
|---|---|---|
| Device Type | Crimping tool | |
| Manufacturer | Partex | |
| Model / Part number | CEFT6 | |
| Product type | Cord end ferrule crimping tool | |
| Tool category | Electrical crimping and cable termination tools | |
| Nominal crimping range | 50–95 mm² | |
| Minimum stated conductor size | 50 mm² | |
| Maximum stated conductor size | 95 mm² | |
| Primary application | Crimping compatible cord end ferrules | |
| Suitable conductor type | Flexible stranded electrical conductors fitted with compatible ferrules | |
| Termination process | Mechanical crimping | |
| Compatible accessories | Cord end ferrules approved for use with the CEFT6 tool and its applicable crimping arrangement | |
| Typical installation environments | Industrial electrical workshops, control panel production, switchgear assembly and electrical maintenance | |
| Manufacturer identification | Partex CEFT6 | |
| HS Code | 82032000 |
Frequently Asked Questions
What is the Partex CEFT6 used for?
The Partex CEFT6 is a cord end ferrule crimping tool used to crimp compatible ferrules onto large-section flexible stranded electrical conductors, preparing them for installation into suitable electrical terminals.
What crimping sizes does the Partex CEFT6 support?
The CEFT6 has a stated crimping range of 50–95 mm². The selected ferrule and conductor must be compatible with the tool's specified crimping arrangement.
Can the Partex CEFT6 be used with insulated cord end ferrules?
The CEFT6 is intended for cord end ferrule crimping, but compatibility with a particular insulated or uninsulated ferrule depends on its barrel dimensions and the manufacturer's approved tooling requirements. Check the ferrule specification before use.
Is the Partex CEFT6 suitable for industrial control panels and switchgear?
Yes. The Partex CEFT6 is suitable for professional cable preparation in industrial control panels, switchgear and distribution assemblies where compatible 50–95 mm² ferrule terminations are required.
How do I achieve a reliable crimp with the Partex CEFT6?
Select a compatible ferrule for the conductor cross-section, strip the cable to the required length, insert all strands fully into the ferrule and follow the CEFT6 manufacturer's crimping instructions. Inspect the completed crimp and verify compatibility with the receiving electrical terminal before installation.
Trusted for Professional Electrical Cable Preparation
Partex electrical termination accessories and specialist tools support the practical requirements of industrial electricians, switchgear manufacturers and control panel builders. The CEFT6 cord end ferrule crimping tool provides a dedicated 50–95 mm² crimping range for preparing compatible large-section flexible conductors, helping professionals achieve consistent cable terminations in demanding electrical installation and assembly workflows.
