Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CEFT6-CAL Partex 50-95mm Cord End Ferrule Crimp Tool, calibration certificate
Partex CEFT6-CAL cord end ferrule crimping tool with a 50-95 mm² working range and included calibration certificate, designed for preparing compatible large-section flexible stranded electrical conductors in professional electrical installations and quality-controlled panel assembly.
£224.54
Why Choose the Partex CEFT6-CAL Cord End Ferrule Crimp Tool with Calibration Certificate?
The Partex CEFT6-CAL is a specialist cord end ferrule crimping tool supplied with a calibration certificate, designed for professional termination of large-section flexible stranded electrical conductors. Featuring a stated 50–95 mm² crimping range, this tool provides a practical solution for industrial electricians, switchgear manufacturers and control panel builders who require reliable cable preparation alongside documented calibration information.
As a calibrated variant of the Partex CEFT6 cord end ferrule crimp tool, the CEFT6-CAL combines large-section ferrule crimping capability with supporting calibration documentation. The certificate provides a record associated with the tool's calibration, making this version particularly relevant to organisations operating formal quality assurance, equipment management and inspection procedures.
The Partex CEFT6-CAL 50–95 mm² ferrule crimper is suitable for preparing compatible bootlace ferrules used in industrial power distribution, electrical control cabinets, switchgear assemblies and machinery installations. Its combination of specialist crimping functionality and calibration documentation makes it a practical choice for professional electrical workshops and production environments where tool identification, calibration records and repeatable termination processes are important.
Key Advantages
- 50–95 mm² crimping capacity supports compatible large-section cord end ferrule terminations.
- Supplied with a calibration certificate to support documented tool management and quality assurance procedures.
- Specialist ferrule crimping application provides a dedicated solution for preparing flexible stranded electrical conductors.
- Documented calibration supports traceability within electrical production and inspection workflows.
- Large conductor-size capability makes the tool relevant to industrial power distribution and switchgear wiring.
- Supports consistent cable preparation when used with approved ferrules and the correct crimping procedure.
- Helps prevent loose conductor strands by enabling the installation of correctly crimped cord end ferrules.
- Suitable for quality-controlled production where calibration documentation forms part of internal equipment records.
- Professional electrical installation versatility supports switchgear assembly, panel building, equipment manufacturing and maintenance.
Key Features
- Partex CEFT6-CAL cord end ferrule crimping tool.
- 50–95 mm² nominal crimping range.
- Calibration certificate included.
- Calibrated version of the Partex CEFT6 ferrule crimping tool.
- Designed for compatible large-section cord end ferrules.
- Suitable for preparing flexible stranded conductors for electrical terminal installation.
- Dedicated crimping application for professional electrical cable preparation.
- Calibration documentation supports tool recordkeeping and quality management.
- Suitable for industrial electrical workshops and control panel manufacturing.
- Useful for switchgear assembly and electrical equipment maintenance.
- Identified by manufacturer part number CEFT6-CAL.
Reliable Ferrule Crimping with Documented Calibration for Quality-Controlled Electrical Work
Large-section flexible electrical conductors contain numerous individual wire strands that require correct preparation before installation into compatible electrical terminals. A cord end ferrule gathers these strands within a tubular metal sleeve, creating a consolidated conductor end. The Partex CEFT6-CAL is intended to perform the crimping stage for compatible ferrules within its 50–95 mm² working range, supporting consistent cable preparation in professional electrical installations.
The inclusion of a calibration certificate distinguishes the CEFT6-CAL from the standard CEFT6 tool offering. Calibration documentation can be incorporated into an organisation's equipment register, tool inspection records or quality assurance procedures. This is particularly useful in electrical manufacturing and assembly environments where the condition and documented status of production tools must be controlled. The certificate's specific test results, traceability details and validity should be checked against the documentation supplied with the individual tool.
For dependable crimping, the conductor should be stripped to the length specified for the selected ferrule, with all strands inserted fully into its metal barrel. The ferrule should then be crimped using the manufacturer's approved tool arrangement and operating procedure. The completed termination should be inspected for correct compression, secure conductor retention and compatibility with the receiving terminal. Calibration documentation does not replace correct tool selection, routine inspection or verification of the completed crimp.
Typical Applications
- Crimping large-section cord end ferrules in industrial electrical installations.
- Quality-controlled switchgear and distribution board manufacturing.
- Industrial control panel production requiring documented tooling records.
- Preparing flexible conductors for compatible power distribution terminals.
- Motor control centre wiring and electrical equipment assembly.
- OEM machinery manufacturing and electrical production environments.
- Electrical workshops operating formal tool calibration programmes.
- Industrial maintenance and refurbishment work requiring documented equipment calibration.
- Professional cable preparation using compatible 50–95 mm² ferrules.
Technical Specifications
Tick the specs you need, then view products that match.
| Conductor Size | 50 mm² | |
|---|---|---|
| Device Type | Crimping tool | |
| Manufacturer | Partex | |
| Model / Part number | CEFT6-CAL | |
| Base tool model | CEFT6 | |
| Product type | Cord end ferrule crimping tool with calibration certificate | |
| Tool category | Electrical crimping and cable termination tools | |
| Nominal crimping range | 50–95 mm² | |
| Minimum stated conductor size | 50 mm² | |
| Maximum stated conductor size | 95 mm² | |
| Calibration documentation | Included | |
| Primary application | Crimping compatible cord end ferrules | |
| Suitable conductor type | Flexible stranded electrical conductors fitted with compatible ferrules | |
| Termination method | Mechanical crimping | |
| Compatible accessories | Cord end ferrules approved for use with the CEFT6 crimping arrangement | |
| Typical installation environments | Electrical workshops, industrial control panel production, switchgear assembly and maintenance | |
| Manufacturer identification | Partex CEFT6-CAL | |
| HS Code | 82032000 |
Frequently Asked Questions
What is the Partex CEFT6-CAL used for?
The Partex CEFT6-CAL is a cord end ferrule crimping tool designed for terminating compatible ferrules onto large-section flexible stranded electrical conductors. It is supplied with a calibration certificate to support documented tool management and professional electrical installation procedures.
What crimping sizes does the Partex CEFT6-CAL support?
The CEFT6-CAL has a stated crimping range of 50–95 mm². The selected conductor and ferrule must be compatible with the tool's approved crimping arrangement.
What is the difference between the Partex CEFT6 and CEFT6-CAL?
Both products are based on the Partex CEFT6 cord end ferrule crimping tool with a stated 50–95 mm² working range. The CEFT6-CAL version is supplied with a calibration certificate, making it particularly suitable for organisations requiring documented tool calibration records.
Does the Partex CEFT6-CAL include a calibration certificate?
Yes. The Partex CEFT6-CAL is specified with a calibration certificate. The certificate should be reviewed on receipt to confirm its recorded calibration information, identification details and suitability for the organisation's quality assurance requirements.
Is the Partex CEFT6-CAL suitable for quality-controlled electrical panel manufacturing?
Yes. The CEFT6-CAL is a practical option for electrical panel builders and switchgear manufacturers working with compatible 50–95 mm² ferrules where calibration documentation is required as part of production equipment management. Correct crimping procedures and ongoing tool inspection remain essential.
Trusted for Professional Electrical Crimping and Quality-Controlled Assembly
Partex electrical termination accessories and specialist crimping tools support the practical requirements of industrial electricians, switchgear manufacturers and control panel builders. The CEFT6-CAL combines a dedicated 50–95 mm² ferrule crimping range with calibration documentation, helping electrical professionals maintain organised tooling records and consistent cable preparation processes in industrial production and installation environments.
