Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2675745 Cembre UP15.7-50 DIE SET
Cembre 2675745 UP15.7-50 interchangeable pre-rounding die set with a nominal 15.7 mm profile, designed to prepare compatible sector-shaped conductors before final crimping.
£297.00
Why Choose the Cembre UP15.7-50 Pre-Rounding Die Set?
The Cembre 2675745, identified by the die reference UP15.7-50, is a precision-engineered pre-rounding die set designed for preparing sector-shaped electrical conductors before the final crimping operation. Manufactured for professional cable installation and power distribution work, it helps convert the conductor into a controlled, rounded profile that can be inserted correctly into a compatible connector.
Pre-rounding is an important preparation stage when terminating sectoral conductors. By reshaping the conductor before crimping, the Cembre UP15.7-50 helps improve conductor positioning, connector insertion and the consistency of the completed electrical joint. Its matched die halves provide repeatable compression when installed in an approved Cembre hydraulic crimping tool or head.
Featuring a nominal 15.7 mm internal profile, the Cembre 2675745 is part of the Cembre 50-series interchangeable die system. It is intended for use with compatible Cembre crimping equipment, including selected HT51, RH50, B50 and related 50-series tools, subject to confirmation against the applicable Cembre die selection guide.
Key Advantages
- Genuine Cembre pre-rounding die set for professional conductor preparation.
- Helps reshape sectoral conductors before connector insertion and crimping.
- 15.7 mm nominal profile for controlled and repeatable forming.
- Designed for compatible Cembre 50-series hydraulic crimping equipment.
- Matched die halves help produce a consistent conductor profile.
- Supports reliable cable termination in power distribution installations.
Key Features
- Cembre UP15.7-50 die reference.
- Manufacturer part number 2675745.
- Interchangeable pre-rounding die set.
- 15.7 mm internal forming profile.
- Designed primarily for sector-shaped electrical conductors.
- Prepares conductors for subsequent insertion and crimping.
- Compatible with selected Cembre tools accepting 50-series dies.
- Durable metal construction for professional installation environments.
Reliable Preparation of Sector-Shaped Conductors
Sector-shaped conductors are commonly used in larger power cables because their profile allows several conductors to fit efficiently within the overall cable construction. Before a sectoral conductor can be inserted into certain circular connector barrels, it may need to be reshaped using an appropriate pre-rounding die.
The Cembre UP15.7-50 applies controlled compression around the conductor to create a more uniform rounded profile. This helps the conductor enter the selected connector correctly and supports an even final crimp. The die reference, connector, conductor and crimping tool must always be selected as a complete compatible system.
Typical Applications
- Preparation of sector-shaped power cable conductors.
- Low-voltage and medium-voltage cable termination work.
- Electrical substations and power distribution systems.
- Industrial switchgear and control panel installations.
- Utility cable maintenance and network construction.
- Infrastructure, renewable energy and heavy industrial projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Crimping die / die set | |
|---|---|---|
| Operation | Hydraulic | |
| Product reference | UP15.7-50 | |
| Part number | 2675745 | |
| Product type | Pre-rounding die set | |
| Die system | Cembre 50 series | |
| Nominal internal profile | 15.7 mm | |
| Primary function | Pre-rounding sector-shaped conductors | |
| Operation | Interchangeable dies used in a compatible crimping tool or head | |
| Tool compatibility | Selected Cembre HT51, RH50, B50 and related 50-series equipment | |
| Application stage | Conductor preparation before final crimping | |
| Construction | Precision-machined metal die halves | |
| Quantity | One matched die set | |
| HS Code | 82079099 | |
| Country of Manufacture | Italy |
Frequently Asked Questions
What is the Cembre 2675745 used for?
The Cembre 2675745 is a pre-rounding die set used to reshape compatible sector-shaped conductors before they are inserted into a connector and crimped.
What is the die reference for Cembre part number 2675745?
The corresponding Cembre die reference is UP15.7-50.
What profile does the UP15.7-50 die produce?
The die has a nominal 15.7 mm internal forming profile for preparing the applicable conductor.
Which tools can use this die set?
It is designed for selected Cembre tools and heads that accept 50-series interchangeable dies. Exact compatibility should be checked against the tool manual and current Cembre die selection guide.
Does this die complete the final electrical crimp?
No. The UP15.7-50 is primarily a conductor preparation die. A separate crimping die matched to the connector and conductor is normally required to complete the final termination.
Trusted Cable Preparation from Cembre
Cembre interchangeable dies are used by electrical contractors, utilities and cable installation specialists to achieve controlled conductor preparation and dependable cable terminations with compatible Cembre tools and connectors.
