Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
SW6B Partex spiral wrap, 4 to 25mm, Black, pack 10m
Partex SW6B black flexible spiral cable wrap accommodates cable bundle diameters from 4 to 25 mm and is supplied in a 10 m pack for organising, bundling and providing supplementary protection to electrical wiring and industrial cable assemblies.
£1.66
Why Choose the Partex SW6B Black Spiral Cable Wrap?
The Partex SW6B Spiral Wrap is a flexible cable management solution designed to organise, bundle and provide supplementary protection for electrical cables, wiring harnesses and compatible small hoses. Suitable for cable bundle diameters of 4–25 mm, this black spiral cable wrap is supplied in a convenient 10 m pack, making it a practical choice for electrical installations, industrial machinery, control panels and equipment wiring.
Unlike conventional closed cable sleeving, the spiral wrap construction allows cables to be enclosed within a continuous helical covering while providing opportunities for individual wires to enter or exit the bundle along its length. This makes the Partex SW6B particularly useful where wiring branches off towards sensors, switches, terminals or other electrical components.
The flexible spiral design accommodates appropriately sized cable bundles and allows them to follow suitable bends and equipment routing paths. Its black finish provides a neat, professional appearance, while the 10 m supplied length can be cut into shorter sections to suit individual installation requirements. Whether used for new electrical assemblies, machinery wiring or maintenance work, the SW6B helps maintain organised cable routes without permanently enclosing individual conductors.
Key Advantages
- 4–25 mm cable bundle range: Suitable for organising compatible cable bundles across a useful range of diameters.
- Flexible spiral construction: Wraps around cable assemblies while accommodating bends and changes in routing direction.
- Convenient 10 m pack: Provides sufficient material for multiple shorter cable management applications.
- Professional black finish: Creates a tidy, consistent appearance in electrical and industrial installations.
- Individual cable access: Allows cables to enter or exit the wrapped bundle between spiral turns.
- Improved cable organisation: Helps group loose wires into manageable cable assemblies.
- Supplementary abrasion protection: Provides an additional covering against incidental rubbing and general handling wear.
- Flexible installation: Can be fitted around existing compatible cable bundles without disconnecting every conductor.
- Cut-to-length convenience: Enables installers to prepare individual sections for different equipment and cable routes.
- Versatile applications: Suitable for control panels, industrial machinery, automation equipment and electrical maintenance.
Key Features
- Genuine Partex spiral cable management product.
- Manufacturer part number: SW6B.
- Flexible spiral cable wrap construction.
- Suitable cable bundle diameter range: 4–25 mm.
- Colour: Black.
- Supplied length: 10 m.
- Helical design for wrapping around compatible cable bundles.
- Allows individual cables to branch from the wrapped assembly.
- Can be cut to the required installation length.
- Suitable for organising existing and newly installed wiring.
- Provides supplementary protection against incidental cable rubbing.
- Practical for industrial machinery, electrical control equipment and cable harness assembly.
Reliable Flexible Spiral Cable Management for Industrial Installations
Effective cable management supports organised electrical installations, efficient equipment maintenance and reliable cable routing. Loose or poorly arranged wiring can become difficult to inspect and maintain, particularly in machinery and electrical control systems containing multiple cables and connection points. The Partex SW6B black spiral wrap provides a practical way to group compatible cables together while retaining flexibility and access to individual conductors.
The spiral construction is particularly useful for wiring assemblies with multiple branch connections. Unlike a fully enclosed cable sleeve, the SW6B allows individual cables to leave the bundle between successive turns. This can simplify routing towards sensors, switches, connectors and equipment terminals while keeping the remaining wiring grouped and organised.
Designed for cable bundle diameters of 4–25 mm, the wrap can accommodate different compatible wiring arrangements. The helical design follows suitable bends and changes in direction, making it useful for machinery wiring and control equipment installations. Installers should select the appropriate bundle diameter and avoid wrapping so tightly that cables become compressed, damaged or restricted in applications involving movement.
The 10 m supplied length provides flexibility for preparing multiple cable management sections. The wrap can be cut to the required length using a suitable cutting tool, with cut ends checked for sharp edges or burrs that could damage cable insulation. Although spiral wrap provides supplementary protection against incidental rubbing, it should not replace correctly specified conduit, electrical insulation, mechanical guarding or specialist protection against severe abrasion, excessive heat and other hazards. Material-specific properties, including temperature resistance, flame performance and chemical compatibility, should be confirmed before use in demanding environments.
Typical Applications
- Electrical control panels: Organising wiring bundles within control cabinets and electrical enclosures.
- Industrial automation: Managing cables connected to sensors, actuators and automated equipment.
- Machinery wiring: Grouping compatible cables along equipment frames and machinery cable routes.
- Cable harness assembly: Creating organised wiring bundles while allowing individual cable branches.
- Electrical maintenance: Improving cable organisation during servicing, repairs and modifications.
- Panel building: Supporting tidy cable routing during electrical control panel manufacture.
- Electronic equipment: Organising compatible power, signal and control cables.
- Equipment refurbishment: Reorganising existing wiring during machinery upgrades and modifications.
- Commercial installations: Bundling compatible equipment cables where flexible spiral management is appropriate.
- Mechanical engineering: Grouping compatible cables and small hoses in suitable assemblies.
- Prototype development: Providing adaptable cable management for equipment testing and assembly.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 10 m | |
|---|---|---|
| Device Type | Spiral wrap | |
| Material | Polyethylene | |
| Cable Diameter (mm) | 4–25 mm | |
| Colour | Black | |
| Manufacturer | Partex | |
| Manufacturer part number | SW6B | |
| Product category | Spiral Cable Wrap | |
| Product type | Flexible spiral cable wrapping | |
| Colour | Black | |
| Cable bundle accommodation range | 4–25 mm | |
| Supplied length | 10 m | |
| Pack quantity | 1 × 10 m length | |
| Construction | Flexible helical spiral wrap | |
| Installation method | Wrapped around compatible cable bundles | |
| Primary function | Cable bundling, organisation and supplementary protection | |
| Cable access | Individual cables can enter or exit between spiral turns | |
| Typical applications | Electrical wiring, cable harnesses, machinery wiring and equipment cable management | |
| Application sectors | Electrical engineering, industrial automation, machinery assembly and maintenance | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex SW6B spiral wrap used for?
The Partex SW6B is a flexible black spiral cable wrap used to organise, bundle and provide supplementary protection for compatible electrical cables, wiring harnesses and small hoses. Its spiral construction allows individual cables to enter or exit the bundle along its length.
What cable bundle diameters does the Partex SW6B accommodate?
The Partex SW6B is specified for cable bundle diameters of 4–25 mm. Installers should measure the completed cable bundle and ensure that the spiral wrap provides a suitable fit without excessive compression.
How much spiral wrap is supplied in one pack?
The Partex SW6B is supplied in a 10 m pack. The material can be cut into shorter sections to suit individual cable routing and equipment installation requirements.
Can individual cables exit the spiral wrap along its length?
Yes. The helical spiral construction allows individual cables to enter or leave the wrapped bundle between successive turns. This is useful for machinery and control equipment wiring where cables branch towards different electrical components.
What is the difference between spiral wrap and braided cable sleeving?
Spiral wrap consists of a helical strip that is wrapped around a cable bundle, allowing individual cables to branch out between turns. Braided cable sleeving surrounds the bundle with a flexible mesh covering. Spiral wrap can be particularly convenient for existing wiring and installations requiring frequent cable entry or exit points.
Can the Partex SW6B be cut to length?
Yes. The SW6B spiral wrap can be cut to suit the required installation length using an appropriate cutting tool. Cut ends should be checked and finished where necessary to avoid damaging cable insulation or other components.
Is the Partex SW6B suitable for industrial machinery and electrical control panels?
The Partex SW6B is suitable for consideration in industrial machinery, electrical control panels and equipment wiring applications where flexible cable bundling is required. The installation environment, cable movement, temperature conditions and material compatibility should be assessed before use.
A Practical Choice for Professional Industrial Cable Management
Partex cable management products offer practical solutions for electrical contractors, panel builders, machinery manufacturers and industrial maintenance professionals. The SW6B black spiral wrap combines a flexible helical design, a 4–25 mm cable bundle accommodation range and a convenient 10 m pack, helping create organised cable assemblies while allowing individual wires to branch from the bundle where required.
