Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
SW19N Partex spiral wrap, 15 to 50mm, Natural, pack 10m
Partex SW19N natural flexible spiral cable wrap suitable for cable bundles from 15 mm to 50 mm in diameter, supplied in a 10 m pack for electrical cable organisation, wiring harness bundling and additional surface protection in industrial installations.
£5.00
Why Choose the Partex SW19N Natural Spiral Cable Wrap?
The Partex SW19N natural spiral wrap is a flexible spiral cable binding and protection solution designed to organise, bundle and protect electrical cables, wiring looms and flexible hoses. Suitable for cable bundles measuring 15 mm to 50 mm in diameter, this versatile cable management product provides a practical way to keep wiring organised while maintaining flexibility and access to individual cables.
Part of the Partex SW spiral wrap range, the SW19N features an open helical construction that can be wound around existing cable bundles without disconnecting cable terminations. Unlike fully enclosed braided sleeving or rigid conduit, its spiral design allows individual cables to enter or exit the bundle at different points along the cable route. This makes it particularly useful for electrical control panels, industrial machinery, automation equipment and wiring harness assemblies.
Supplied in a convenient 10 m pack, the Partex SW19N natural spiral cable wrap can be cut to the required installation length, making it suitable for both individual cable runs and multiple smaller cable management tasks. Its flexible construction accommodates bends and changes in cable routing, while the natural finish provides a neutral appearance for electrical installations and equipment assemblies. The SW19N is an excellent choice for electrical contractors, panel builders, machinery manufacturers and industrial maintenance professionals.
Key Advantages
- Suitable for cable bundles from 15 mm to 50 mm in diameter, providing versatile cable management.
- Flexible spiral construction accommodates bends, curves and irregular cable routes.
- 10 m pack length provides a convenient supply for installation and maintenance projects.
- Natural finish offers a neutral appearance for electrical and industrial equipment.
- Helps organise multiple cables into a single, manageable wiring bundle.
- Open helical design allows individual cables to branch out at different points.
- Can be installed around existing cables without disconnecting their terminations.
- Helps reduce loose wiring, cable tangling and everyday rubbing.
- Can be cut to length to suit different cable routes and equipment assemblies.
- Allows easier access to individual cables than fully enclosed sleeving.
- Provides a flexible alternative to rigid conduit for general cable organisation.
- Suitable for electrical installation, equipment manufacturing and industrial maintenance work.
Key Features
- Partex SW series spiral cable wrap.
- Manufacturer part number: SW19N.
- Suitable cable bundle diameter: 15 mm to 50 mm.
- Colour: Natural.
- Pack length: 10 m.
- Flexible helical cable wrapping construction.
- Open spiral profile for convenient cable branching.
- Designed for electrical cable bundling, organisation and additional surface protection.
- Can be fitted around existing wiring assemblies.
- Flexible design accommodates changes in cable routing direction.
- Suitable for grouping compatible power, control and signal cables.
- Can be cut into shorter lengths for individual installations.
- Helps reduce light abrasion and incidental mechanical contact.
- Suitable for electrical control panels, industrial machinery and automation equipment.
- Allows individual cables to enter or exit between spiral turns.
- Natural finish provides an alternative to black spiral cable wrap.
- Convenient 10 m supply length for professional installation work.
Flexible Natural Spiral Wrap for Electrical Cable Bundling and Industrial Cable Management
The Partex SW19N spiral wrap provides a practical solution for installations where multiple electrical cables need to be organised into a single bundle while remaining accessible. Its open helical construction allows the wrap to be wound around existing wiring without removing connectors or disconnecting cable terminations. This makes it particularly useful for cable management improvements, maintenance work and equipment modifications.
With a specified 15 mm to 50 mm cable bundle diameter range, the SW19N accommodates a variety of wiring assemblies and cable harness sizes. The flexible spiral profile allows the wrap to follow changes in cable routing and accommodate compatible bundles within its intended diameter range. Installers should select the wrap according to the complete cable bundle diameter and allow sufficient flexibility for the cables being secured.
One of the main advantages of spiral cable wrap is its ability to support cable branching. Individual wires can enter or exit between adjacent spiral turns without requiring the entire bundle to be opened. This is particularly beneficial in industrial automation systems, where wiring may need to branch towards sensors, switches, motors, terminal blocks and other electrical components along a shared cable route.
The natural finish provides a neutral alternative to black spiral wrap and can be useful where a lighter-coloured cable management product is preferred. In installations containing multiple cable groups, different wrap colours may also support visual organisation when used alongside a documented cable identification system. Colour should not be relied upon as the sole means of identifying electrical safety functions or circuit ratings.
The SW19N also provides an additional layer between cables and surrounding equipment surfaces, helping reduce light abrasion, incidental rubbing and cable tangling. However, its open spiral construction does not provide continuous coverage. It should not be used as a substitute for electrical insulation, liquid-tight conduit or specialised protection against severe abrasion, sharp edges, heavy mechanical impact or other significant hazards.
The supplied 10 m length can be divided into shorter sections to suit individual cable runs, helping installers use only the material required. For reliable results, the spiral wrap should be installed without excessively compressing the cable bundle or restricting cable bend radii. The material's temperature limits, chemical compatibility and suitability for ultraviolet exposure should be checked against the manufacturer's specifications before use in demanding environments.
Typical Applications
- Industrial electrical cable bundling and organisation.
- Electrical control panel wiring management.
- Industrial automation and control system installations.
- Machinery wiring harnesses and equipment assemblies.
- Sensor, actuator and motor cable routing.
- Electrical equipment manufacturing and maintenance.
- Power, control and signal cable grouping where permitted by installation requirements.
- Cable routes requiring individual wires to branch from a main bundle.
- Wiring loom organisation in mechanical equipment.
- Industrial maintenance and cable refurbishment projects.
- Flexible cable routing around machinery and equipment.
- Organising cables beneath workstations and equipment benches.
- Reducing loose and tangled wiring in electrical installations.
- Applications requiring adjustable cable bundling and convenient cable access.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 10 m | |
|---|---|---|
| Material | Polyethylene | |
| Cable Diameter (mm) | 15–50 mm | |
| Colour | Natural | |
| Device Type | Spiral wrap | |
| Manufacturer | Partex | |
| Product range | SW Spiral Wrap | |
| Model | SW19N | |
| Product type | Flexible spiral cable wrap | |
| Product category | Cable management and cable protection | |
| Suitable bundle diameter | 15 mm to 50 mm | |
| Minimum bundle diameter | 15 mm | |
| Maximum bundle diameter | 50 mm | |
| Colour | Natural | |
| Pack length | 10 m | |
| Construction | Flexible helical spiral wrap | |
| Design | Open spiral cable binding | |
| Primary function | Cable bundling, organisation and additional surface protection | |
| Installation method | Spiral wrapping around cable bundles | |
| Cable branching | Individual cables can enter or exit between spiral turns | |
| Cutting | Can be cut to the required installation length | |
| Typical applications | Electrical wiring, cable harnesses, industrial machinery and control equipment | |
| Suitable installation environments | Electrical, industrial and mechanical equipment, subject to material and environmental compatibility | |
| Product identification | SW19N | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex SW19N spiral wrap used for?
The Partex SW19N is designed to bundle, organise and provide additional surface protection for electrical cables, wiring looms and flexible hoses. It is particularly useful for industrial machinery, electrical control panels, automation equipment and installations where individual cables need to branch from a main bundle.
What cable bundle diameters will the Partex SW19N fit?
The SW19N is suitable for cable bundles measuring approximately 15 mm to 50 mm in diameter. This range makes it suitable for a variety of electrical and mechanical cable management applications.
How much Partex SW19N spiral wrap is supplied in each pack?
The Partex SW19N is supplied in a 10 m pack. The spiral wrap can be cut into shorter sections to suit individual cable runs and equipment installations.
Can the Partex SW19N be installed around existing cables?
Yes. The open spiral design allows the SW19N to be wound around existing cable bundles without disconnecting cables or removing their terminations. This makes it suitable for both new installations and improvements to existing cable management systems.
Can individual cables exit from the Partex SW19N spiral wrap?
Yes. Individual cables can enter or exit the bundle between adjacent turns of the spiral wrap. This is particularly useful for industrial control systems where cables branch towards sensors, switches, motors and other electrical components.
What is the difference between the Partex SW19N and SW19B?
Both products are Partex spiral cable wraps suitable for cable bundles from 15 mm to 50 mm and are supplied in 10 m packs. The principal difference is their colour: SW19N has a natural finish, whereas SW19B is black. The appropriate version can be selected according to installation appearance and cable organisation requirements.
What is the difference between spiral wrap and braided cable sleeving?
Spiral wrap has an open helical construction that can be installed around existing cables and allows individual wires to branch out along the route. Braided sleeving generally surrounds the cable bundle with an expandable woven structure, providing more continuous surface coverage. The best option depends on cable accessibility, flexibility and protection requirements.
Can the Partex SW19N be cut to length?
Yes. The Partex SW19N spiral wrap can be cut to the required installation length using suitable cutting tools. This allows the supplied 10 m length to be divided into sections for different cable management tasks.
Does the Partex SW19N protect cables against abrasion?
The SW19N provides an additional protective layer that can help reduce light abrasion, rubbing and tangling. However, its open spiral design does not provide continuous coverage, so additional protection may be necessary where cables are exposed to sharp edges, severe abrasion or mechanical impact.
Is the Partex SW19N suitable for electrical control panels?
Yes. The Partex SW19N is suitable for organising compatible cable bundles in electrical control panels, industrial automation systems and equipment assemblies, particularly where cables need to branch towards different components.
Can the Partex SW19N be used on moving cable assemblies?
Its flexible construction can accommodate cable routes involving bends and some movement. However, applications involving repeated dynamic flexing should be assessed against the complete cable assembly design, bend radius, movement frequency and the spiral wrap's specified operating characteristics.
Is the Partex SW19N a replacement for electrical cable insulation?
No. The SW19N spiral wrap is intended for cable organisation and additional mechanical surface protection. It must not be used as a replacement for correctly rated electrical insulation, protective conduit or other safety measures required by the installation.
Trusted by Electrical Installers and Industrial Engineers
Partex spiral cable wrap provides a practical and flexible solution for organising electrical cables and wiring harnesses in industrial and commercial installations. Combining an accessible open spiral design, a natural finish and a 15 mm to 50 mm cable bundle diameter range, the SW19N helps create tidy, manageable cable assemblies while allowing individual wires to branch from the main bundle where required.
