Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB95EARTH(GRN/YEL) is a green/yellow 2:1 heat shrink tubing with a 9.5 mm supplied diameter, 4.7 mm recovered diameter and 8 m pack length, designed for protective earth conductor identification, electrical insulation and cable protection.
£13.90
The Partex HSMB95EARTH(GRN/YEL) is a practical and reliable green/yellow heat shrink tubing designed for protective earth conductor identification, electrical insulation and cable protection. Featuring a 2:1 shrink ratio, the tubing contracts to approximately half its original internal diameter when heated, creating a close-fitting sleeve around suitably sized cables, wires and electrical connections.
As part of the Partex HSMB heat shrink tubing range, HSMB95EARTH(GRN/YEL) is particularly suitable for identifying protective earth conductors in electrical installations, industrial control panels and machinery wiring. Its distinctive green/yellow colour combination provides clear visual identification of protective earthing connections, supporting organised wiring and compliance with applicable conductor identification requirements.
With a nominal supplied internal diameter of 9.5 mm, a nominal fully recovered internal diameter of 4.7 mm and an 8 m pack length, this heat shrink tubing offers a convenient solution for electrical contractors, panel builders, maintenance engineers and industrial automation specialists. The cut-to-length format allows installers to prepare appropriately sized identification and insulation sleeves for individual conductors and cable assemblies.
Correct identification of protective earth conductors is an important part of safe electrical installation and maintenance. The Partex HSMB95EARTH(GRN/YEL) provides a practical method of applying a clearly recognisable green/yellow identification sleeve to appropriately sized conductors and cable terminations. When suitable heat is applied, the tubing contracts around the conductor, helping create a secure and professional finish.
The 2:1 shrink ratio allows the nominal internal diameter to reduce from 9.5 mm to 4.7 mm when fully recovered. This makes the tubing useful for accommodating different conductor and insulation diameters within its suitable recovery range. Its green/yellow appearance is intended for protective earth identification and should not be used to identify live or neutral conductors where applicable wiring standards reserve this colour combination for protective earthing. Installers should select the tubing according to conductor dimensions, environmental conditions and the requirements of the electrical installation.
Tick the specs you need, then view products that match.
| Supply Format | 8 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 4.7–9.5 mm | |
| Internal Diameter Before Shrinking (mm) | 9.5 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green/Yellow | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | HSMB Heat Shrink Tubing | |
| Part number | HSMB95EARTH(GRN/YEL) | |
| Product type | Heat shrinkable electrical insulation and identification tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 9.5 mm | |
| Nominal fully recovered internal diameter | 4.7 mm | |
| Colour | Green/Yellow | |
| Pack length | 8 m | |
| Installation method | Heat shrinking | |
| Primary identification application | Protective earth conductors | |
| Additional applications | Cable insulation, conductor identification and wire protection | |
| Format | Cut-to-length tubing | |
| HS Code | 39269097 |
The Partex HSMB95EARTH(GRN/YEL) is primarily used for identifying protective earth conductors and bonding connections in electrical installations. Its green/yellow colour combination provides clear visual identification while the heat shrink construction offers a close-fitting protective sleeve.
A 2:1 shrink ratio means that the tubing can reduce to approximately half its original internal diameter when fully recovered. The HSMB95EARTH(GRN/YEL) has a nominal supplied internal diameter of 9.5 mm and a nominal recovered internal diameter of 4.7 mm.
Each pack contains 8 m of green/yellow heat shrink tubing, which can be cut into shorter sections for individual protective earth conductor identification and cable protection requirements.
The green/yellow colour combination is used to identify protective earth conductors in electrical installations. It helps electricians and maintenance engineers recognise protective earthing connections and distinguish them from other conductors in accordance with applicable wiring identification standards.
Cut the tubing to the required length, position it over a suitably sized conductor or cable section and apply controlled heat using an appropriate heat gun. The tubing contracts around the conductor to provide a close-fitting identification sleeve. Ensure the conductor is safely isolated before installation and avoid overheating the tubing or surrounding insulation.
Partex heat shrink tubing provides a practical solution for electrical professionals who require clear conductor identification, dependable cable protection and organised wiring installations. The HSMB95EARTH(GRN/YEL) combines a versatile 2:1 shrink ratio with distinctive green/yellow protective earth identification, making it a useful choice for electrical distribution systems, industrial control panels and machinery wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.