Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB64BLUE is a blue 2:1 heat shrink tubing with a 6.4 mm supplied diameter, 3.2 mm recovered diameter and 12 m pack length, designed for electrical insulation, cable protection and colour-coded wire identification.
£13.90
The Partex HSMB64BLUE is a versatile and reliable blue heat shrink tubing designed to provide electrical insulation, cable protection and a neat, professional finish to wiring installations. Featuring a 2:1 shrink ratio, this tubing contracts to approximately half its original internal diameter when heated, allowing it to fit securely around suitably sized cables, wires and electrical connections.
As part of the Partex HSMB heat shrink tubing range, HSMB64BLUE is suitable for cable insulation, wire protection, conductor identification and general electrical assembly work. Its blue finish supports colour-coded cable management, helping installers distinguish wiring groups and identify conductors in electrical panels, machinery and industrial automation systems.
With a nominal supplied internal diameter of 6.4 mm, a fully recovered internal diameter of approximately 3.2 mm and a 12 m pack length, this blue heat shrink tubing offers a practical solution for electrical contractors, panel builders, maintenance engineers and industrial automation specialists. Its cut-to-length format makes it particularly useful for cable harnesses, insulated connections and colour-coded wiring assemblies.
Heat shrink tubing provides a practical method of insulating, protecting and identifying electrical wiring. When suitable heat is applied, the tubing contracts around the cable or component, creating a close-fitting sleeve that helps protect against abrasion, handling damage and accidental contact with covered conductive parts. The Partex HSMB64BLUE uses a 2:1 shrink ratio, allowing its nominal internal diameter to reduce from 6.4 mm to 3.2 mm when fully recovered.
The blue finish is particularly useful in installations where visual cable identification and consistent colour coding are important. It can be used to identify selected wiring groups, protect appropriately sized cable connections and provide a uniform appearance across electrical assemblies. Where conductor colours have a defined electrical meaning, the tubing must be used in accordance with applicable wiring regulations and site identification standards. For dependable results, the tubing should be selected according to the dimensions of the cable or component and installed using appropriate controlled heating equipment.
Tick the specs you need, then view products that match.
| Supply Format | 12 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 3.2–6.4 mm | |
| Internal Diameter Before Shrinking (mm) | 6.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Blue | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | HSMB Heat Shrink Tubing | |
| Part number | HSMB64BLUE | |
| Product type | Heat shrinkable electrical insulation tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 6.4 mm | |
| Nominal fully recovered internal diameter | 3.2 mm | |
| Colour | Blue | |
| Pack length | 12 m | |
| Installation method | Heat shrinking | |
| Application | Electrical insulation, cable protection and wire identification | |
| Format | Cut-to-length tubing | |
| HS Code | 39269097 |
The Partex HSMB64BLUE is used for electrical insulation, cable protection and colour-coded wiring identification. It provides a close-fitting protective sleeve around suitably sized wires, cable joints and electrical components.
A 2:1 shrink ratio means that the tubing can reduce to approximately half its original internal diameter when fully recovered. The HSMB64BLUE has a nominal supplied diameter of 6.4 mm and a nominal recovered diameter of 3.2 mm.
Each pack contains 12 m of blue heat shrink tubing, which can be cut into shorter sections to suit individual wiring, identification and cable protection requirements.
Yes. The blue finish makes the tubing useful for visual cable identification and colour-coded wiring systems. It can help distinguish selected cable groups or conductors, provided the chosen colour coding complies with the applicable electrical installation standards.
Cut the tubing to the required length, position it over a suitably sized wire or component and apply controlled heat using an appropriate heat gun. The tubing contracts around the component to provide a close-fitting protective sleeve. Avoid overheating and ensure the installation is suitable for the tubing's specified operating conditions.
Partex heat shrink tubing provides a practical solution for electrical professionals who require dependable cable protection, organised wiring and clear identification. The HSMB64BLUE combines a versatile 2:1 shrink ratio with a distinctive blue finish, making it a useful choice for electrical assemblies, control panels and colour-coded cable management.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.