Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB48GREEN green 2:1 heat shrink tubing with a 4.8 mm supplied diameter, 2.4 mm nominal recovered diameter and 12 m pack length for electrical insulation, small cable protection and colour-coded conductor identification.
£13.90
The Partex HSMB48GREEN is a professional green 2:1 heat shrink tubing designed for electrical insulation, cable protection and colour-coded identification of electrical conductors. Featuring a nominal supplied diameter of 4.8 mm and a nominal recovered diameter of 2.4 mm, this tubing contracts when heated to provide a close-fitting protective covering around appropriately sized wires, cables and electrical components.
Designed for professional electrical installation, industrial automation and cable management applications, Partex heat shrink tubing is suitable for control panels, machinery wiring, electronic equipment and electrical assemblies. Its distinctive green finish supports visual identification and organised wiring, making it useful where designated conductors or cable groups need to be distinguished within an electrical installation.
Supplied in a convenient 12 m pack, the HSMB48GREEN provides material for repeated cable insulation, wiring repairs and electrical assembly tasks. Its 4.8/2.4 mm nominal dimensions make it particularly useful for small-diameter cables, individual conductors and electrical connections where a neat, professional finish and clear colour identification are required.
Heat shrink tubing provides a practical method of insulating and protecting electrical wiring by contracting around a conductor or component when controlled heat is applied. The Partex HSMB48GREEN features a nominal 2:1 shrink ratio, allowing its diameter to reduce from approximately 4.8 mm to 2.4 mm when fully recovered. This makes it useful for small cable connections, conductor coverings and wiring assemblies where a close-fitting protective sleeve is required.
In industrial automation and electrical control systems, green heat shrink tubing can help identify designated conductors, organise wire harnesses and provide a tidy finish to completed electrical assemblies. The green colour is suitable for general identification where permitted by the applicable wiring standards, but green-only tubing must not replace green/yellow protective earth identification where that colour combination is required. Installers should ensure that the tubing passes over the largest part of the connection before shrinking and recovers sufficiently around the smallest section. Applications requiring a specified voltage rating, operating temperature, flame classification or environmental sealing should be checked against the applicable Partex technical documentation.
Tick the specs you need, then view products that match.
| Supply Format | 12 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 2.4–4.8 mm | |
| Internal Diameter Before Shrinking (mm) | 4.8 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model | HSMB48GREEN | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 4.8 mm | |
| Nominal recovered diameter | 2.4 mm | |
| Colour | Green | |
| Pack length | 12 m | |
| Installation method | Heat shrinking | |
| Identification application | Colour-coded wire and conductor identification | |
| Primary function | Electrical insulation, cable protection and wiring identification | |
| Typical installation | Small conductors, cable connections and electrical wiring assemblies | |
| HS Code | 39269097 |
The Partex HSMB48GREEN is used for electrical insulation, small cable protection and colour-coded conductor identification. It is suitable for appropriately sized conductors, cable connections and electrical wiring assemblies.
A 2:1 shrink ratio means the tubing can recover to approximately half its original nominal diameter when correctly heated, reducing from 4.8 mm to 2.4 mm.
The tubing has a nominal supplied diameter of 4.8 mm and a nominal recovered diameter of 2.4 mm. The tubing must fit over the component before heating and recover sufficiently to provide a close fit.
The HSMB48GREEN is green-only tubing intended for general colour-coded identification and cable protection where permitted. Where applicable electrical standards require protective earth conductors to be identified using green/yellow colouring, the appropriate green/yellow heat shrink tubing should be selected instead.
The Partex HSMB48GREEN is supplied in a 12 m pack, providing material for multiple electrical insulation, cable protection and colour-coded wiring tasks.
Partex cable identification and protection products support professional electrical installation, industrial automation, control panel manufacturing and maintenance applications. The HSMB48GREEN green 2:1 heat shrink tubing provides a practical solution for small cable insulation, conductor protection and colour-coded electrical wiring installations in industrial and commercial environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.