Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB32CLEAR is a clear 2:1 heat shrink tubing with a 3.2 mm supplied diameter, 1.6 mm recovered diameter and 15 m pack length, designed for electrical insulation, cable protection and identification applications.
£13.90
The Partex HSMB32CLEAR is a versatile and reliable clear heat shrink tubing designed to provide electrical insulation, cable protection and a neat, professional finish to wiring installations. Featuring a 2:1 shrink ratio, this tubing contracts to approximately half its original diameter when heated, allowing it to fit securely around cables, wires and electrical connections.
As part of the Partex heat shrink tubing range, HSMB32CLEAR is suitable for cable identification, wire insulation, conductor protection and general electrical assembly work. Its transparent finish allows underlying cable colours, identification markings and labels to remain visible, making it particularly useful where visual inspection and identification are important.
With a supplied internal diameter of 3.2 mm, a recovered diameter of approximately 1.6 mm and a 15 m pack length, this clear heat shrink tubing offers a practical solution for electrical contractors, panel builders, maintenance engineers and industrial automation specialists. Its compact size makes it particularly suitable for smaller wires, cable identification sleeves and low-voltage wiring assemblies.
Heat shrink tubing provides a practical method of protecting and organising electrical wiring. When suitable heat is applied, the tubing contracts around the cable or component, creating a close-fitting sleeve that helps protect against abrasion, handling damage and accidental contact with insulated connections. The Partex HSMB32CLEAR uses a 2:1 shrink ratio, allowing its nominal internal diameter to reduce from 3.2 mm to 1.6 mm when fully recovered.
The clear finish is especially advantageous for applications where identification markings must remain visible. It can be positioned over compatible cable markers, printed identification sleeves or small wiring assemblies to provide an additional protective covering without obscuring the information beneath. For reliable results, the tubing should be selected according to the dimensions of the cable or component and installed using appropriate controlled heating equipment.
Tick the specs you need, then view products that match.
| Supply Format | 15 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 1.6–3.2 mm | |
| Internal Diameter Before Shrinking (mm) | 3.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Clear | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | HSMB Heat Shrink Tubing | |
| Part number | HSMB32CLEAR | |
| Product type | Heat shrinkable electrical insulation tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 3.2 mm | |
| Nominal fully recovered internal diameter | 1.6 mm | |
| Colour | Clear / Transparent | |
| Pack length | 15 m | |
| Installation method | Heat shrinking | |
| Application | Electrical insulation, cable identification and wire protection | |
| Format | Cut-to-length tubing | |
| HS Code | 39269097 |
The Partex HSMB32CLEAR is used for electrical insulation, cable protection and identification applications. Its clear finish makes it particularly suitable for protecting cable markers and labels while keeping the information underneath visible.
A 2:1 shrink ratio means that the tubing can reduce to approximately half its original internal diameter when fully recovered. The HSMB32CLEAR has a nominal supplied diameter of 3.2 mm and a nominal recovered diameter of 1.6 mm.
Each pack contains 15 m of clear heat shrink tubing, which can be cut into shorter sections to suit individual wiring and cable protection requirements.
Yes. The transparent finish allows compatible cable identification labels and markings to remain visible beneath the tubing, making it useful for electrical panel wiring and cable identification applications.
Cut the tubing to the required length, position it over a suitably sized wire or component and apply controlled heat using an appropriate heat gun. The tubing contracts around the component to provide a close-fitting protective sleeve. Avoid overheating and ensure the installation is suitable for the tubing's specified operating conditions.
Partex heat shrink tubing provides a practical solution for electrical professionals who require dependable cable protection, organised wiring and clear identification. The HSMB32CLEAR combines a versatile 2:1 shrink ratio with a transparent finish, making it a useful choice for electrical assemblies, control panels and cable identification work.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.