Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB32BROWN brown 2:1 heat shrink tubing with a 3.2 mm supplied diameter, 1.6 mm recovered diameter and 15 m pack length, designed for electrical insulation, mechanical protection and conductor colour identification in control panels, electrical equipment and industrial wiring assemblies.
£13.90
The Partex HSMB32BROWN is a professional 2:1 brown heat shrink tubing designed for electrical insulation, mechanical protection and conductor colour identification. Featuring a nominal supplied diameter of 3.2 mm and a nominal fully recovered diameter of 1.6 mm, this heat shrink sleeving provides a practical solution for protecting appropriately sized electrical wires, small cable connections and conductor assemblies.
Part of the Partex heat shrink tubing range, HSMB32BROWN uses heat-activated radial contraction to create a close-fitting protective covering around compatible conductors. Its distinctive brown colour supports electrical wire identification in installations where brown is the appropriate conductor designation. Under harmonised UK and European wiring conventions, brown is commonly used to identify a line conductor, including L1 in three-phase systems, subject to the applicable wiring standards and installation requirements.
With a 2:1 nominal shrink ratio, the tubing can contract from its supplied diameter of 3.2 mm towards a recovered diameter of 1.6 mm when heated correctly. Supplied in a convenient 15 m pack, Partex HSMB32BROWN is suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring professional protective sleeving for electrical wiring and cable identification.
The Partex HSMB32BROWN provides a practical solution for electrical installations requiring protective sleeving and clear conductor identification. Its nominal 3.2 mm supplied diameter allows the tubing to be positioned over appropriately sized electrical wires and compact conductor assemblies before heating. Once controlled heat is applied, the tubing contracts around the underlying conductor to create a close-fitting protective covering.
The 2:1 shrink ratio provides a useful recovery range for small electrical wiring. With a nominal fully recovered diameter of 1.6 mm, the tubing can reduce to approximately half its original diameter. Correct sizing is essential: the conductor or connection must fit through the tubing before shrinking, and the sleeve must recover sufficiently to provide the intended fit.
The brown colour supports conductor identification in electrical systems using harmonised wiring conventions. In modern UK fixed electrical installations, brown is commonly associated with a line conductor in single-phase circuits and the L1 line conductor in three-phase circuits. However, the actual conductor function must always be determined from the applicable wiring standard, circuit design and installation documentation. Applying brown sleeving does not itself establish the electrical function of a conductor.
Heat shrink tubing is particularly useful in control panel manufacturing, industrial automation and electrical equipment assembly, where conductors may require supplementary insulation or protection against abrasion and handling damage. HSMB32BROWN helps create a neat finish around suitable wiring sections while supporting consistent colour identification throughout an installation.
The 15 m pack is convenient for electrical workshops, maintenance departments and OEM production environments. Installers can cut the required length, slide it over the conductor and apply controlled heat using a suitable heat gun. Even heating helps achieve consistent recovery while reducing the risk of damaging the underlying cable insulation, electrical connections or nearby components.
Where a defined voltage rating, flame classification, environmental protection level or moisture seal is required, the applicable product specifications must be checked. Standard heat shrink tubing should not be assumed to provide a watertight seal, adhesive bond or specific environmental rating without confirmation.
Tick the specs you need, then view products that match.
| Supply Format | 15 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 1.6–3.2 mm | |
| Internal Diameter Before Shrinking (mm) | 3.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Brown | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | 2:1 Heat Shrink Tubing | |
| Manufacturer part number | HSMB32BROWN | |
| Product type | Brown heat shrink tubing / electrical insulation sleeving | |
| Nominal shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 3.2 mm | |
| Nominal diameter after recovery | 1.6 mm | |
| Colour | Brown | |
| Pack length | 15 m | |
| Shrinking method | Controlled application of heat | |
| Primary functions | Electrical insulation, mechanical protection and conductor colour identification | |
| Suitable component types | Appropriately sized electrical wires, small conductors and wiring assemblies | |
| Installation | Cut to length, position over the wire or connection and apply heat evenly | |
| Typical installation environments | Control panels, electrical equipment, industrial machinery and cable harnesses | |
| HS Code | 39269097 |
The Partex HSMB32BROWN is used for electrical insulation, mechanical protection and colour identification of appropriately sized wires and conductor assemblies. Typical applications include control panel wiring, line conductor identification, machinery wiring, electrical equipment assembly and maintenance.
A 2:1 shrink ratio means the tubing can contract to approximately half its original nominal diameter when fully recovered under suitable heating conditions. This allows it to fit closely around compatible electrical conductors and components.
The tubing has a nominal supplied diameter of 3.2 mm and a nominal fully recovered diameter of 1.6 mm. The conductor must fit inside the tubing before shrinking, and the tubing must recover sufficiently around the finished wire.
Partex HSMB32BROWN is supplied in a 15 m pack. The tubing can be cut into shorter sections to suit individual electrical insulation, protection and conductor identification requirements.
Under harmonised UK and European wiring conventions, brown is commonly used to identify a line conductor. In suitable three-phase installations, brown is associated with L1. The actual conductor function must always be confirmed against the applicable wiring standard and installation documentation.
Yes. The brown colour can support line conductor identification where appropriate to the electrical installation. It is particularly useful for identifying suitably designated conductors in control panels and electrical assemblies. Colour identification must remain consistent with the relevant wiring regulations and circuit documentation.
Yes. Its 3.2 mm nominal supplied diameter and 1.6 mm nominal recovered diameter make it suitable for appropriately sized small conductors. The outside diameter of the wire, including its existing insulation, must be checked before selecting the tubing.
Yes, provided the connection is small enough to fit through the tubing before shrinking and the finished sleeve meets the application's electrical and mechanical requirements. The tubing must recover sufficiently around the connection to provide the intended protective coverage.
The tubing provides protective sleeving around suitable wires and connections, but waterproof or moisture-sealing performance should not be assumed without a confirmed product rating. Where environmental sealing is required, an appropriately specified adhesive-lined heat shrink product should be selected.
Ensure the electrical circuit is safely isolated, cut the tubing to the required length and slide it over the suitable wire or connection. Apply controlled, even heat using an appropriate heat gun until the tubing has contracted around the conductor. Allow it to cool before handling, taking care to avoid overheating the underlying wire insulation or nearby components.
Partex heat shrink tubing provides electrical contractors, control panel builders, OEM manufacturers and industrial maintenance teams with a practical solution for conductor identification, supplementary electrical insulation and mechanical protection. The HSMB32BROWN variant combines a nominal 3.2 mm supplied diameter, 1.6 mm recovered diameter, 2:1 shrink ratio, brown finish and convenient 15 m pack length for preparing and protecting appropriately sized electrical wiring assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.