Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB254RED red 2:1 heat shrink tubing, supplied in a 5 m pack with a nominal diameter of 25.4 mm shrinking to 12.7 mm, designed for electrical insulation, cable protection, colour-coded identification and wiring management.
£13.90
The Partex HSMB254RED is a versatile 2:1 red heat shrink tubing designed for electrical insulation, cable protection and wire identification in industrial, commercial and electrical installation applications. Featuring a nominal diameter of 25.4 mm before shrinking and 12.7 mm after shrinking, this heat shrink sleeve provides a neat, close-fitting solution for protecting larger cables, conductors, cable joints and electrical connections.
As part of the Partex HSMB heat shrink tubing range, the HSMB254RED offers a practical solution for cable management and electrical wiring protection. When suitable heat is applied, the tubing contracts around the underlying cable or component, helping protect against abrasion, mechanical wear and everyday handling. Its distinctive red colour also supports colour-coded cable identification, polarity marking and organised wiring systems where red is the designated identification colour.
Supplied in a convenient 5 m pack, the Partex HSMB254RED is ideal for electricians, electrical panel builders, maintenance engineers and industrial automation professionals. Its 2:1 shrink ratio and larger 25.4 mm supplied diameter make it particularly useful for insulating and protecting larger cable bundles, electrical joints, cable terminations and industrial wiring assemblies.
Heat shrink tubing such as the Partex HSMB254RED provides a convenient method of insulating electrical conductors, covering wire joints and protecting cable assemblies. By applying controlled heat, the tubing contracts around the cable or connection, forming a close-fitting sleeve that helps improve wiring organisation and reduce exposure to everyday mechanical wear.
The 2:1 shrink ratio allows the tubing to reduce from its nominal 25.4 mm supplied diameter to approximately 12.7 mm when fully recovered. For effective installation, the tubing should be large enough to pass over the widest section of the connection before heating and capable of shrinking securely around the smallest section. Its larger diameter makes it particularly useful for covering substantial cable joints, protecting compatible cable terminations and organising groups of electrical conductors.
The red colour provides an additional identification benefit in electrical installations. It can be used to mark positive DC conductors where red is specified by the applicable wiring convention, helping maintenance engineers and electrical installers distinguish designated circuits and connections. Colour identification should always follow the relevant electrical wiring standards and site requirements.
Tick the specs you need, then view products that match.
| Supply Format | 5 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Red | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | HSMB Heat Shrink Tubing | |
| Model | HSMB254RED | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 25.4 mm | |
| Nominal diameter after shrinking | 12.7 mm | |
| Colour | Red | |
| Pack length | 5 m | |
| Shrinking method | Heat activated | |
| Primary function | Electrical insulation and cable protection | |
| Secondary function | Cable identification and wiring organisation | |
| Typical installation | Electrical wiring, cable assemblies, control panels and industrial machinery | |
| HS Code | 39269097 |
The Partex HSMB254RED is used for electrical insulation, cable protection, wire identification and covering compatible electrical joints, larger cable bundles and connections in control panels, machinery and wiring assemblies.
The tubing has a 2:1 shrink ratio, meaning its nominal diameter can reduce to approximately half its original size when correctly heated.
The tubing has a nominal supplied diameter of 25.4 mm and a nominal recovered diameter of 12.7 mm.
The Partex HSMB254RED is supplied in a 5 m pack, providing tubing for electrical installation, maintenance and cable management tasks.
Red heat shrink tubing is commonly used in electrical control panels, industrial wiring systems, cable assemblies, machinery installations and colour-coded electrical applications. It can also identify positive DC conductors where red is the designated colour under the applicable wiring convention.
Partex supplies cable identification and wiring management solutions for electrical installers, control panel builders and industrial maintenance professionals. The HSMB254RED red heat shrink tubing provides a practical solution for insulating, protecting and organising larger electrical cables and wiring assemblies in industrial and commercial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.