Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB254CLEAR is a transparent 2:1 heat shrink tubing with a 25.4 mm supplied diameter, 12.7 mm recovered diameter and 5 m pack length, designed for electrical insulation, cable protection and preserving the visibility of cable identification markings.
£13.90
The Partex HSMB254CLEAR is a versatile and practical clear heat shrink tubing designed for electrical insulation, cable protection and the preservation of visible cable identification markings. Featuring a 2:1 shrink ratio, the tubing contracts to approximately half its original internal diameter when heated, creating a close-fitting protective sleeve around suitably sized cables, wires and electrical components.
As part of the Partex HSMB heat shrink tubing range, HSMB254CLEAR provides a convenient solution for electrical contractors, control panel builders, maintenance engineers and industrial automation specialists. Its transparent finish allows underlying conductor colours, identification labels and cable markings to remain visible, making it particularly useful for applications requiring both protection and visual identification.
With a nominal supplied internal diameter of 25.4 mm, a nominal fully recovered internal diameter of 12.7 mm and a 5 m pack length, this clear heat shrink tubing is suitable for larger cable sections, wiring assemblies and protective identification sleeves. Its cut-to-length format enables installers to prepare individual sections for cable insulation, identification protection and general electrical maintenance work.
Heat shrink tubing provides a convenient method of protecting and insulating electrical wiring while maintaining a neat installation finish. When suitable heat is applied, the tubing contracts around the cable or component, forming a close-fitting sleeve that helps protect against abrasion, handling damage and accidental contact with covered conductive parts. The Partex HSMB254CLEAR features a 2:1 shrink ratio, allowing its nominal internal diameter to reduce from 25.4 mm to 12.7 mm when fully recovered.
The transparent finish is particularly useful in electrical installations where cable identification markings must remain visible after protective sleeving has been applied. HSMB254CLEAR can be positioned over compatible printed cable markers, identification labels, insulated conductor sections and appropriately sized wiring assemblies. The clear material allows visual inspection of the covered area without removing the sleeve. For dependable results, the tubing should be selected according to cable dimensions, required insulation performance and installation conditions, then installed using suitable controlled heating equipment. It should not be treated as a substitute for a correctly rated electrical connection or primary insulation system without appropriate verification.
Tick the specs you need, then view products that match.
| Material | Polyolefin | |
|---|---|---|
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Clear | |
| Adhesive Lined | No | |
| Device Type | Heat-shrink tubing | |
| Supply Format | 5 m | |
| Manufacturer | Partex | |
| Product range | HSMB Heat Shrink Tubing | |
| Part number | HSMB254CLEAR | |
| Product type | Heat shrinkable electrical insulation tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 25.4 mm | |
| Nominal fully recovered internal diameter | 12.7 mm | |
| Colour | Clear / Transparent | |
| Pack length | 5 m | |
| Installation method | Heat shrinking | |
| Application | Electrical insulation, cable protection and identification marking protection | |
| Format | Cut-to-length tubing | |
| HS Code | 39269097 |
The Partex HSMB254CLEAR is used for electrical insulation, cable protection and protecting identification markings on cables and wiring assemblies. Its transparent finish allows underlying conductor colours, labels and printed markings to remain visible.
A 2:1 shrink ratio means that the tubing can reduce to approximately half its original internal diameter when fully recovered. The HSMB254CLEAR has a nominal supplied internal diameter of 25.4 mm and a nominal recovered internal diameter of 12.7 mm.
Each pack contains 5 m of clear heat shrink tubing, which can be cut into shorter sections to suit individual cable insulation, identification protection and wiring assembly requirements.
Yes. The transparent finish makes the tubing suitable for covering compatible cable identification labels and printed markers while keeping the information underneath visible. The tubing and label materials should be compatible with the installation temperature and operating environment.
Cut the tubing to the required length, position it over a suitably sized cable, identification marker or component and apply controlled heat using an appropriate heat gun. The tubing contracts around the covered section to create a close-fitting protective sleeve. Ensure electrical equipment is safely isolated before installation and avoid overheating the tubing, labels or surrounding insulation.
Partex heat shrink tubing provides a practical solution for electrical professionals who require dependable cable protection, organised wiring and clearly visible identification markings. The HSMB254CLEAR combines a versatile 2:1 shrink ratio with a transparent finish, making it a useful choice for electrical assemblies, industrial control panels and cable identification protection.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.