Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB254BROWN is a brown 2:1 heat shrink tubing with a 25.4 mm supplied diameter, 12.7 mm recovered diameter and 5 m pack length, designed for electrical insulation, cable protection and colour-coded conductor identification.
£13.90
The Partex HSMB254BROWN is a versatile brown heat shrink tubing designed for electrical insulation, cable protection and colour-coded conductor identification in industrial and commercial electrical installations. Featuring a 2:1 shrink ratio, the tubing contracts to approximately half its original internal diameter when heated, creating a close-fitting protective sleeve around suitably sized cables, wires and electrical components.
As part of the Partex HSMB heat shrink tubing range, HSMB254BROWN provides a practical solution for electrical contractors, control panel builders and maintenance engineers requiring organised wiring and dependable cable protection. Its brown finish supports visual conductor identification and is particularly useful in installations where brown is used to identify a line conductor in accordance with applicable electrical wiring standards.
With a nominal supplied internal diameter of 25.4 mm, a nominal fully recovered internal diameter of 12.7 mm and a 5 m pack length, this heat shrink tubing is suitable for larger cable sections, conductor terminations and electrical wiring assemblies. Its cut-to-length format allows installers to prepare individual protective sleeves for cable insulation, identification and maintenance applications.
Heat shrink tubing provides a convenient method of protecting, insulating and identifying electrical wiring. When suitable heat is applied, the tubing contracts around the cable or component, forming a close-fitting sleeve that helps protect against abrasion, handling damage and accidental contact with covered conductive parts. The Partex HSMB254BROWN features a 2:1 shrink ratio, allowing its nominal internal diameter to reduce from 25.4 mm to 12.7 mm when fully recovered.
The brown finish is particularly useful in electrical installations where conductor colour identification is important. Under current UK harmonised wiring colour conventions, brown identifies a line conductor in single-phase circuits and the L1 conductor in three-phase circuits. HSMB254BROWN can therefore be used for appropriately sized conductor identification applications where permitted by the relevant installation standards. For dependable results, the tubing should be selected according to the cable dimensions, required insulation performance and environmental conditions, then installed using suitable controlled heating equipment. It should not be treated as a substitute for a correctly rated electrical connection or primary insulation system without appropriate verification.
Tick the specs you need, then view products that match.
| Supply Format | 5 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Brown | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | HSMB Heat Shrink Tubing | |
| Part number | HSMB254BROWN | |
| Product type | Heat shrinkable electrical insulation tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 25.4 mm | |
| Nominal fully recovered internal diameter | 12.7 mm | |
| Colour | Brown | |
| Pack length | 5 m | |
| Installation method | Heat shrinking | |
| Application | Electrical insulation, cable protection and conductor identification | |
| Format | Cut-to-length tubing | |
| HS Code | 39269097 |
The Partex HSMB254BROWN is used for electrical insulation, cable protection and colour-coded conductor identification. Its brown finish is particularly suitable for identifying appropriately sized line conductors in electrical installations where brown is the designated conductor colour.
A 2:1 shrink ratio means that the tubing can reduce to approximately half its original internal diameter when fully recovered. The HSMB254BROWN has a nominal supplied internal diameter of 25.4 mm and a nominal recovered internal diameter of 12.7 mm.
Each pack contains 5 m of brown heat shrink tubing, which can be cut into shorter sections to suit individual cable insulation, conductor identification and protection requirements.
Yes. The brown finish is suitable for identifying line conductors where brown is required by the applicable wiring standard. In UK harmonised conductor colour identification, brown is used for single-phase line conductors and L1 in three-phase systems. The tubing must be installed in accordance with the relevant electrical regulations.
Cut the tubing to the required length, position it over a suitably sized cable or component and apply controlled heat using an appropriate heat gun. The tubing contracts around the component to create a close-fitting protective sleeve. Ensure the electrical equipment is safely isolated before installation and avoid overheating the tubing or surrounding insulation.
Partex heat shrink tubing provides a practical solution for electrical professionals who require dependable cable protection, organised wiring and clear conductor identification. The HSMB254BROWN combines a versatile 2:1 shrink ratio with a distinctive brown finish, making it a useful choice for electrical distribution assemblies, industrial control panels and colour-coded conductor identification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.