Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB191GREEN green 2:1 heat shrink tubing, supplied in a 5 m pack with a nominal diameter of 19.1 mm shrinking to 9.5 mm, designed for electrical insulation, cable identification and wire protection.
£13.90
The Partex HSMB191GREEN is a versatile 2:1 green heat shrink tubing designed for electrical insulation, cable protection and wire identification in industrial, commercial and electrical installation applications. Featuring a nominal diameter of 19.1 mm before shrinking and 9.5 mm after shrinking, this heat shrink sleeve provides a neat, close-fitting solution for protecting cables, conductors and electrical connections.
As part of the Partex HSMB heat shrink tubing range, the HSMB191GREEN offers a practical solution for cable management and electrical wiring protection. When suitable heat is applied, the tubing contracts around the underlying cable or component, helping protect against abrasion, mechanical wear and everyday handling. Its distinctive green colour supports colour-coded cable identification and organised wiring systems where green is the designated identification colour.
Supplied in a convenient 5 m pack, the Partex HSMB191GREEN is ideal for electricians, electrical panel builders, maintenance engineers and industrial automation professionals. Its 2:1 shrink ratio and larger 19.1 mm supplied diameter make it particularly useful for insulating and protecting larger cable joints, cable bundles and electrical wiring assemblies.
Heat shrink tubing such as the Partex HSMB191GREEN provides a convenient method of insulating electrical conductors, covering wire joints and protecting cable assemblies. By applying controlled heat, the tubing contracts around the cable or connection, forming a close-fitting sleeve that helps improve wiring organisation and reduce exposure to everyday mechanical wear.
The 2:1 shrink ratio allows the tubing to reduce from its nominal 19.1 mm supplied diameter to approximately 9.5 mm when fully recovered. For effective installation, the tubing should be large enough to pass over the widest section of the connection before heating and capable of shrinking securely around the smallest section. Its green colour makes it useful for designated cable identification schemes, although solid green tubing should not be used as a substitute for the green/yellow identification required for protective earth conductors under applicable UK wiring standards.
Tick the specs you need, then view products that match.
| Supply Format | 5 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 9.5–19.1 mm | |
| Internal Diameter Before Shrinking (mm) | 19.1 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | HSMB Heat Shrink Tubing | |
| Model | HSMB191GREEN | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 19.1 mm | |
| Nominal diameter after shrinking | 9.5 mm | |
| Colour | Green | |
| Pack length | 5 m | |
| Shrinking method | Heat activated | |
| Primary function | Electrical insulation and cable protection | |
| Secondary function | Cable identification and wiring organisation | |
| Typical installation | Electrical wiring, cable assemblies and control panels | |
| HS Code | 39269097 |
The Partex HSMB191GREEN is used for electrical insulation, cable protection, wire identification and covering compatible electrical joints, cable bundles and connections in control panels, machinery and wiring assemblies.
The tubing has a 2:1 shrink ratio, meaning its nominal diameter can reduce to approximately half its original size when correctly heated.
The tubing has a nominal supplied diameter of 19.1 mm and a nominal recovered diameter of 9.5 mm.
The Partex HSMB191GREEN is supplied in a 5 m pack, providing tubing for multiple electrical installation, maintenance and cable management tasks.
The HSMB191GREEN is solid green rather than green/yellow. In UK electrical installations, protective earth conductors are identified using the green/yellow colour combination, so solid green tubing should not be used as a replacement for compliant protective earth identification. This product is suitable for other colour-coded cable identification applications where green is permitted.
Partex supplies cable identification and wiring management solutions for electrical installers, control panel builders and industrial maintenance professionals. The HSMB191GREEN green heat shrink tubing provides a practical solution for insulating, protecting and organising electrical wiring in industrial and commercial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.