Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HSMB191CLEAR Partex 2:1 heat shrink tubing, 19.100000000000001/9.5mm, clear, pack 5m
Partex HSMB191CLEAR is transparent 2:1 heat shrink tubing with a 19.1 mm supplied diameter, 9.5 mm recovered diameter and 5 m pack length, designed for electrical cable insulation, wiring protection and covering visible identification markings.
£13.90
Why Choose the Partex HSMB191CLEAR 2:1 Clear Heat Shrink Tubing?
The Partex HSMB191CLEAR is a versatile clear heat shrink tubing designed for electrical insulation, cable protection and covering wires, conductors and electrical connections. Featuring a 2:1 shrink ratio, the tubing contracts when heated to provide a close-fitting protective covering around appropriately sized cables, wiring joints and electrical components.
As part of the Partex HSMB heat shrink tubing range, this product provides a practical solution for electrical installation, industrial maintenance and cable management applications. Its transparent finish allows underlying cable colours, identification markings and component details to remain visible, making it particularly useful in electrical control panels, cable assemblies and industrial automation equipment.
With a nominal supplied diameter of 19.1 mm, a recovered diameter of approximately 9.5 mm and a 5 m pack length, the HSMB191CLEAR is suitable for insulating appropriately sized electrical cables, protecting cable connections and covering identification labels while maintaining visibility of the information beneath.
Key Advantages
- 2:1 heat shrink ratio provides a close-fitting covering around compatible cables and components.
- 19.1 mm supplied diameter accommodates appropriately sized electrical cables, conductors and connections.
- 9.5 mm recovered diameter enables effective coverage of suitable wiring and components.
- Clear transparent finish allows underlying cable colours, labels and identification markings to remain visible.
- 5 m pack length provides material for multiple installation, insulation and maintenance tasks.
- Helps protect covered wiring against abrasion, incidental contact and general handling.
Key Features
- Partex HSMB heat shrink tubing range.
- 2:1 nominal shrink ratio.
- 19.1 mm nominal supplied diameter.
- 9.5 mm nominal recovered diameter.
- Clear transparent finish for visible cable identification and inspection.
- 5 m supplied length.
- Heat-activated shrinking for close-fitting coverage of compatible cables and components.
- Can be cut to the required length for individual electrical wiring applications.
- Suitable for electrical insulation, cable protection and covering identification markings.
Reliable Cable Insulation with Clear Identification Visibility
Heat shrink tubing provides a convenient method of insulating electrical conductors, covering suitable wire joints and protecting cable sections. When appropriate heat is applied, the tubing contracts around the underlying component, forming a neat protective covering that helps reduce exposure to abrasion, incidental contact and routine handling.
The Partex HSMB191CLEAR is particularly useful for electrical wiring installations where cable identification must remain visible after protection is applied. Its transparent finish allows existing cable colours, printed identification sleeves and labels to be viewed through the covering, while the 5 m supplied length allows installers to cut individual sections to suit different applications. For effective fitting, the tubing should be large enough to pass over the component before shrinking and capable of recovering securely around it.
Typical Applications
- Electrical cable insulation and conductor protection.
- Protective covering for cable identification labels and printed markings.
- Industrial control panel wiring and cable management.
- Electrical equipment assembly, servicing and maintenance.
- Protection of appropriately sized conductor joints and cable sections.
- Instrumentation, automation and low-voltage electrical installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 5 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 9.5–19.1 mm | |
| Internal Diameter Before Shrinking (mm) | 19.1 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Clear | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | HSMB Heat Shrink Tubing | |
| Model | HSMB191CLEAR | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Supplied diameter | 19.1 mm | |
| Recovered diameter | 9.5 mm | |
| Colour | Clear / Transparent | |
| Pack length | 5 m | |
| Installation method | Heat shrinking | |
| Primary function | Electrical insulation, cable protection and preservation of visible identification markings | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HSMB191CLEAR used for?
The tubing is designed for electrical insulation, cable protection and covering identification markings on appropriately sized electrical cables, conductors, connections and components.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can contract from its nominal supplied diameter of 19.1 mm to approximately 9.5 mm when correctly heated under suitable conditions.
Is the HSMB191CLEAR heat shrink tubing transparent?
Yes. The tubing has a clear transparent finish, allowing underlying cable colours, identification markings and labels to remain visible through the covering.
How much heat shrink tubing is supplied?
Each pack contains 5 m of Partex HSMB191CLEAR heat shrink tubing, which can be cut into shorter sections according to installation requirements.
Where can this heat shrink tubing be installed?
It can be used in electrical control panels, cable assemblies, instrumentation equipment, industrial machinery and other applications requiring suitable cable insulation, protection or visible identification.
Trusted by Electrical Installers and Industrial Professionals
Partex cable identification and wiring accessories are used by electrical installers, control panel builders and industrial maintenance professionals for organised and practical cable management. The HSMB191CLEAR provides a versatile transparent heat shrink solution for electrical cable insulation, visible identification and industrial assembly applications.
