Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB16YELLOW yellow 2:1 heat shrink tubing with a 1.6 mm supplied diameter, 0.8 mm nominal recovered diameter and 17 m pack length for fine-wire electrical insulation, cable protection and colour-coded conductor identification.
£13.90
The Partex HSMB16YELLOW is a professional yellow 2:1 heat shrink tubing designed for electrical insulation, fine-wire protection and colour-coded identification of small electrical conductors. Featuring a nominal supplied diameter of 1.6 mm and a recovered diameter of 0.8 mm, this tubing contracts when heated to provide a close-fitting protective sleeve around compatible wires and electrical components.
Designed for precision electrical wiring and cable management applications, Partex heat shrink tubing is suitable for electronic equipment, industrial control panels, instrumentation wiring and electrical maintenance. Its distinctive yellow finish supports visual identification and organised wiring, making it useful where individual conductors or small cable groups need to be distinguished within an electrical assembly.
Supplied in a 17 m pack, the HSMB16YELLOW provides a practical solution for repeated wiring, cable identification and electrical assembly tasks. Its compact 1.6/0.8 mm nominal dimensions make it particularly suitable for fine wires, small electrical connections and precision cable management applications requiring a neat protective covering.
Heat shrink tubing provides a convenient method of insulating and protecting electrical conductors by contracting around wires and components when heat is applied. The Partex HSMB16YELLOW features a nominal 2:1 shrink ratio, allowing the tubing to reduce from approximately 1.6 mm to 0.8 mm in diameter when fully recovered. This makes it suitable for appropriately sized fine-wire connections, small conductor sections and precision electrical wiring assemblies where a close-fitting protective covering is required.
The yellow finish is useful in electronic equipment, instrumentation systems and industrial automation applications where colour coding helps identify designated wires or circuits. Its visible colouring can also support maintenance work by making selected conductors easier to recognise within densely populated wiring assemblies. Yellow-only tubing should not be used as a substitute for green/yellow protective earth identification where applicable wiring standards require that combination. Installers should ensure that the tubing fits over the largest part of the connection before heating and recovers sufficiently around the underlying wire. Any required voltage rating, operating temperature or environmental protection classification should be confirmed against the applicable Partex technical documentation.
Tick the specs you need, then view products that match.
| Supply Format | 17 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 0.8–1.6 mm | |
| Internal Diameter Before Shrinking (mm) | 1.6 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Yellow | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model | HSMB16YELLOW | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 1.6 mm | |
| Nominal recovered diameter | 0.8 mm | |
| Colour | Yellow | |
| Pack length | 17 m | |
| Installation method | Heat shrinking | |
| Identification application | Colour-coded wire and conductor identification | |
| Primary function | Electrical insulation, fine-wire protection and cable identification | |
| Typical installation | Small conductors, electronic wiring and precision electrical assemblies | |
| HS Code | 39269097 |
The Partex HSMB16YELLOW is used for electrical insulation, fine-wire protection and colour-coded conductor identification in electronic equipment, instrumentation wiring and industrial electrical assemblies.
A 2:1 shrink ratio means the tubing can recover to approximately half its original nominal diameter when correctly heated, reducing from 1.6 mm to 0.8 mm.
The tubing has a nominal supplied diameter of 1.6 mm and a nominal recovered diameter of 0.8 mm.
The yellow finish provides a visible colour-coding option for identifying selected wires and conductors while offering a protective covering around compatible electrical connections. Yellow-only tubing is not a replacement for green/yellow protective earth identification where that marking is required.
The Partex HSMB16YELLOW is supplied in a 17 m pack, providing material for multiple fine-wire insulation, electrical assembly and cable identification tasks.
Partex cable identification and protection products support professional electrical installation, electronic assembly, industrial automation and control panel manufacturing. The HSMB16YELLOW yellow 2:1 heat shrink tubing provides a practical solution for fine-wire insulation, colour-coded identification and organised electrical wiring installations in industrial and commercial environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.